Join me as I show you exactly how I paint on location and how you can too. From my thought process to some tips and strategies that will help you become more successful in the field. You can do this, and I'll show you how!
Textured gesso ground recipe for painting on masonite: 2 Cups Gesso 5tsp Pumice "FF" Raw Umber Acrylic Paint. I mix in raw umber paint, until I get the color that I want to paint on. Not too dark, but enough to tone the panel and get rid of the color of the raw masonite board. _________________________
Add the pumice to the gesso and stir gently until well blended. Once blended, add your raw umber acrylic paint for toning the board.
Using a cheap sponge brush, or chip brush, apply the ground to the precut panels in 2 to 3 coats (allow to dry in between coats), lightly sanding in between coats. If the surface is too rough after your final coat, use a 400 grit sandpaper to lightly remove some of the tooth of the ground. Enjoy!
Hey ArtTube! Thanks for joining me today. I've got a good one for you. This is an area known
as the Granite Dells close to where I live and I'm going to do this painting as though I were
on location. I would do it on location except I'm not very good at filming that yet. So this is the
scene that I'm going to be doing today for you. I plan on adding a mountain in the background and
changing the clouds around to make it a more interesting painting. I'm giving myself about
an hour and a half to do this painting just as I would were I on location and it's just so much
easier for me to go ahead and film this in the studio. But I'm doing it with the time limit like
I would had I been on location. I'm going to paint it exactly the way I would. That way is just simply
starting out with very simple shapes and a shadow pattern so that I know exactly what it is
that I want to do and where I want to put things. One of the things I do want to say is if you put
put down your drawing and it's not exactly the way you want it, don't be afraid to go ahead and
erase parts of it and then fill it back in until you get the shape that you want. It's much easier
to do it now than wish you had done it later. So take your time get that layout done just the way
you would want it and then go ahead and proceed from there. I find that if I don't rush that part
it makes it a whole lot easier down the road. So I'm starting by laying in my darkest darks
and then I'm putting in the shadow parts of these stone walls. When I put this paint down
I do thin it down with a bit of turpentine so that it goes on very thinly and if you give it a
minute or two once you put it down it's going to make your ability to paint over the top of it
so much easier. Be sparing with your turpentine. Don't slather it on and it won't get too slippery.
I used to use way too much turpentine when I started and then I would find that I had a big
slippery mess and I couldn't really do too much with it. You know the more you do it the more you
learn what you can and can't do but it takes a number of times. You need to fail at it
and you know I've failed plenty. I still fail when I go out and I do on location stuff and the truth
is most plein air artists will tell you that they do too if they're being honest with you.
But don't tell them I told you. They'll make me clean their brushes again.
The way I look at it is if you're not failing you're not learning and and that's really really true.
So don't fear failure. Just know that you're learning and next time you'll be able to come
out a little bit smarter than you than you did this time. So you'll see here in the shadow areas
I'm working warms and cools in together. I'm not worried about putting in an individual rock shed.
This is a pretty complicated scene when it comes to this rock formation
and one of the things that I found that really helps is that when you're painting scenes like
this with complicated rocks don't try and paint exactly what's what's there because if you do
you're going to get lost in all that detail. What you're trying to do is get across an impression
of what you're seeing. Make more of a piece of art. So simplify those rocks and make it
something that's pleasing to the eye. Don't worry that this rock doesn't exactly do this or that.
You're not painting a scene that anybody would know anyway. So unless you're painting something
like a specific Teton mountain that that's pretty famous don't worry about that. You're
out there to gather information. That's what I do whenever I'm plane airing. You're trying
to figure out light effects and why something looks like it does. So we're not we're not very
far in and most of the canvas is covered. I'm putting in some of the clouds just the way I think
will look better for the painting. The clouds very seldom are the clouds the way I want them
so you have to manipulate them so that it works more as a as a painting than what's actually
there. I do use the values of what's there but I change the shapes around. So this whole painting
is really a kind of a balance between the shadow side on the left the rocks that are in the light
on the right and the foliage or the shrubbery that's that's kind of separating the two.
I try and keep my light areas separated from my dark areas and and realize that as I go along
I'm going to be manipulating the edges of the paint. That's something that that I'm always
know that I'm going to be doing is manipulating the edges of the paint. So I'll put the paint down
and know that I'm going to go back in and I'm going to soften an edge or I'm going to
work lights into darks and darks into lights. The way I put it down is very seldom the way that
that it stays at least for me. Now you'll see that I'm starting to go in with a little bit
of a rigor brush and adding some definition into that rock face over there. Everything that I do
when it comes to working with these kind of rocks has to do with trying to figure out
what the planes are doing. I find that something reads as a rock much easier if I have edges that
are flat and then turn. If you try and be too subtle with your rocks I find at least for me
that it ends up looking like a big marshmallow or something like that. So I do force the idea that
there's a plane here and especially when I'm doing plein air I try and keep the planes as
simple as possible because you have such a limited time while you're out there. If you
give yourself an hour and a half to do a painting like this you're not going to be terribly terribly
accurate with what's there and nor nor do you have to be. But you do have to be accurate with
your values and with your planes. So already these areas are starting to look like rocks.
I keep the values in the shadows pretty close and then the values in the light area is pretty
close to start and I'll work warms and cools back because in these rocks you have some that are more
of a brown and then you have some that are more of kind of a cool gray and it helps you to
delineate that there's different rocks in there if you just subtly change your your color temperature
on it. Another thing I'd like to mention is notice in the shadow areas over on the
the left hand side there as that plane of the rocks turns and faces more towards the sky
you get a lot of that blue reflection on on the top planes of those rocks and so that's why you
see so much blue in there. The more they turn towards the sky the bluer they're they're going
to be and so that's a nice way of being able to get a lot of color variation and interest going on
in shadow areas. Just pay attention to the planes. Painting rocks is a wonderful way to be able to
tell what's going on with lights atmosphere and and reflection in those lights and shadow areas.
Basically it's all right there for you. Just take a moment sit down and look at them and
and see what you're and what you're seeing and kind of note it. Sometimes I'll go out and I'll
bring my sketch pad with me. I won't bring my paints but my sketch pad and I'll sit down and
I'll do a sketch and I'll make little notes so that I can remember when I get back into the
studio okay this area was more cool because it turned and was reflecting the sky. You know
another thing that I've learned while I'm on location and doing these plein air pieces is
a little bit of detail goes a long way. Sometimes putting in everything that you see is a bad thing
and you're going to end up with a big disjointed mess. Simplifying things is a wonderful way in
order to get the essence of what you're seeing have something be readable and and pleasant
to look at but at the same time you're not just going overboard on detail. Sometimes it really is
true especially in paintings that less is more and so be selective in the details that you choose
to put in. I think you're going to find that if you do that your paintings are going to be more
successful along the way and you're going to be happier with with what you have. At this point
I'm guessing that I'm at about an hour you know we've been at this for about an hour now
and I'm starting to put in those little extra details that keep the scene from being too simple
and so this area or this time is when I'm working the uh manipulating the edges
starting to add in some of the different grasses. I noticed that the area on the right hand side
where the grasses are is maybe a little bit farther down it crept down a little bit farther
than I wanted it. I don't want it to go straight across. One of the tricks we can use as artists
to make something look more three-dimensional is to layer things and so I want to take advantage
of that a little bit. When I'm adding in these grasses you don't have to put a whole lot of
detail in you know just put in a few of the grasses and your eye will read it exactly as
what it is. Give your viewer a little bit of credit they'll be able to figure out what it is
and especially once you put it in the frame it reads just like uh just like it should but you
see I'm just putting in a few details here and there when it comes to these different grasses.
I remember when I first started painting plein air and doing the grasses and I would
paint every single blade that I could see and I'd get home and it would just look a hot mess
and I couldn't figure out why until I started simplifying. It's probably a life truth that
so many of our problems in life would be solved if we just simplified. So we're coming down to
the end here this is about it for the one and a half hours. I decided when I got up in the morning
that the rocks on the right hand side the sunlit rocks were too dark and there really wasn't any
kind of a design to it so I thought what I needed to do was go in there and simplify it a bit
lighten everything up rework some of that shrubbery that's in there because
there's an awful lot of it. It was dry because I used the my liquid medium
and was able to go in and not have to worry about having tacky paint and you know it's a little bit
nerve-wracking when you go in and do something that you think well this painting that I have
it's somewhat successful but I think I can make it better and you take a chance because
there's no undo button you can't go back but I'll always err on trying to make something better and
if I fail at it I can paint another one. You just have to keep trying to get better and trust that
your eye is going to tell you whether or not you're successful. So here I am working the
warms and cools in together not worried too much about keeping individual rocks in fact I've
pretty much obliterated the individual rocks I'm starting to put the sunlit side on these rock
faces and it always goes through that kind of that ugly duckling stage it's just one of the
things of oil painting or doing any art really you just have to trust that okay well I haven't
put in the detail yet so I trust that I'm going to be able to pull this off but if you can't no
big deal. I really think that one of the things that holds a lot of artists back is their fear
of failure they they don't want to they don't want to get to the end of the day and not have
something to show for it but really it's the only way you're going to get better don't be afraid to
and you'll be smarter for it. This is starting to feel better to me with this shrubbery
I think the colors are probably closer to how they were out here in the desert these
these bushes can be they can be pretty dusty color and so sometimes you have to push the
color on them a little bit to make them a little more palatable. Right now I'm just trying to work
back and forth between where the foliage is and where the rocks are showing through. I think
putting in the shadow color of the shrubbery there really helped those bushes to read like
they're continuing on where the sun is has put them in shade and part of them is in shadow and
part of them is in the light that really helped to to sell that effect. I'm making sure that as
I'm working this it's not getting too dark again. One of the reasons why I decided to paint this
repaint this was the fact that it was just too dark and there were too many shadow areas so I'm
going to turn a lot of these rock faces so that it looks like most of them are in the light and only
a little bit of that plane is turning away from the light and don't be stingy with your paint when
you're doing this. I've made a lot of mistakes over the years and one of the biggest was putting down
paint too thinly. I have found that you really get much more control when you actually put down more
paint and I have really found that that is true but you have to learn how the paint works for you
and how you handle it but I do know that when I put more paint down and I don't slather it
with turpentine it maintains your ability to have control over it. So now I'm putting in
some of the shadows on the parts of the rocks that are more in the middle there where
those shrubs are that it's casting shadows on the rocks. Just a little bit of detail on the
right hand side really goes a long way otherwise you've got detail everywhere and I want that
detail to kind of fade away as it gets over to the right. So in total I think this second session
that I've been painting I think it was another 45 minutes at the very most and this is something
that I'm not afraid to do when I get back in the studio. I'll look at it the next day and I'll see
oh this doesn't really work the way I thought it did and so I will go ahead and rework an area.
I call it rather than a complete plein air painting I call it a studier because part of
it's done in the studio part of it is plein air and I thought for the last part it would be
fun to show you actual speed you know so you're moving along but at the same time you're
you're not rushing things. Step back a lot work with a scalpel instead of a sledgehammer at the
end. Thank you for watching this was a lot of fun to do I hope it helped you and I hope you were
able to to add something to your arsenal. If you enjoyed the video and you like what you see
hit the like button it really helps me out and if you're new to the channel but this is your
kind of video go ahead and subscribe I try and upload once once a week usually on Tuesday and
love to have you as part of the family. Anyways as always I'll see you down the road.