Carvin Quad X Tube Selection

TheGospelGuitarist
1 follower
Mar 30, 2026
In this video I discuss the reasoning behind my tube selection and placement for the Carvin Quad X guitar preamp.
Hey Gospel Guitars here talking about the Carbon Quad X retubing that I've done.
With the tubes that I've ordered are an assortment of Tung Sol reissue new old stock tubes and the
same with the Mullards new old stock reissues. They're all 12AX7 tubes and so just to go over
what you're looking at here in V1 I have a Tung Sol in V2 and channel 1 or channel 1 and 2
share the Tung Sol in V1 and channel 3 uses a Mullard in V2 followed by a Tung Sol in V3 and V4
and channel 4 is using a Mullard in V5 6 7 and 8 and then I have another Tung Sol in V9
and to describe the tones I would say that the clean tones which are utilizing V1 for channel 1
and 2 are almost a Fender type of clean. Carbon has their own clean and in my mind I kind of
think of it as a tube driven Roland JC 120. That's it might sound funny but it has a warmer quality
to it than a Fender does but it's got that nice chimey clean tone as well like a Fender Deluxe
or a Fender Reverb. So Carbon has their own thing going and they're great sounding amps
especially like their Bud Lighter series and this amp tubed with the Tung Sol
sounds very very good. I'm really happy with it it's got nice chimey cleans. The Mullards I go with
for the distortion channels on my amps and I've done it with my Digitech GSP 2101. I had Mullards
in that and I had the same result you get a really nice thick even three-dimensional type
of distortion coming out of your amp. So I don't like them as much in V1 which I did do at first
but it's my understanding that the Mullards are a pretty evenly EQed pretty flat on the EQ side of
things and so they give it to me to my ear they give a nicer a smoother more controllable distortion
tone and you can do the EQing with your EQ okay and the tube just distorts everything fairly even
from the lows to the highs and so that's why I loaded up V5 through V8 with them. The only
reason the V9 doesn't have one is because the Tung Sols give a little bit more crispness
to the distortion so my channel three is a mix of the Mullard with two Tung Sols
which gives me a nice classic rock tone but I can also hit the boost button and
really run it into a heavier almost my channel four distortion when I go to channel four
utilizing all these five tubes over here it's a real heavy thick 3d sound but it's got a
shimmer to it as well so it's really full bodied if you would if you want to use your
hair shampoo terminology lots of body in the Mullards and brightness and flop in the Tung
Sols. So anyway that's how I have tubed my Carbon Quad X after placing these tubes in different
positions this is what I think sounds best and of course this won't stop me from ordering a couple
of electro harmonics later and seeing what they do for channel three. Channel three is the hardest
one to get to sound good without the boost button it sounds pretty good though right now
and the Tung Sols are hot and the Mullards are hot so I don't know if I can get this thing any hotter
so anyway on to I'm going to pack this thing back up and then I will do audio demos stay tuned
