Ghost Midi Hexpander Install Part 5 "The 13 Pin Jack"

TheGospelGuitarist
1 follower
1 Video View·Mar 29, 2026
This video covers the destruction of a Schecter C1 E/A while performing a 13 pin jack install for the Ghost Midid Hexpander. Guitar survives but it's not pretty. :(
AI Generated·May contain errors
Okay for this video we're going to be drilling out the square for the install of the 13 pin
midi jack. First thing you want to do is make sure you get this all taped up like I have here
and you want to punch holes where you're going to be drilling and then you want to take an
exacto knife and go around the square so that you etch into the finish of your guitar
and etch around so that when you remove the wood here it won't splinter the the paint off
like on the outside areas here so it'll make a nice clean break in the paint.
So the first thing you're going to do is after you get that preparation done is take your 16th
drill bit and drill the mounting holes for the actual plate. So you're going to start by drilling
these four holes on the outside to a depth of a quarter inch which is about all the wood I got
and you want to do it perpendicular to the guitar edge so if the edge is curving make sure you're
perpendicular to the edge. I'm not too worried about only going a quarter inch because I only
have maybe a little more than that in wood depth. So that phase is done now I got to swap drill bits
and drill out with an eighth inch drill bit the very corner of each
one of the corners for the square that's going to be taken out. Okay well I'm going to try to
the instructions were saying to do mounting getting big bolt you know get a big bit and
remove as much wood but since this is a hollow body I'm thinking if I use my little Dremel saw
at least get halfway through the wood and make a nice straight edge around it to give me a clean
front and then if I need to I can try to take a cutting blade and try to cut the rest of it.
So we'll give it a go see how it goes. Well as you can see I got the hole cut but
because it's a not a solid body do not use these because I split my body
and it goes on to the back side as well there's a split it stops at the hole at the sound hole here
but the split I need to get some glue in there to reset that
make sure it doesn't go any worse and I need to do some something to the back as well.
So it was like something was widening it but it was it just can't take it so
a solid body you wouldn't have a problem doing that but with a hollow body you don't want to
do any chiseling use your Dremel. I did use it at the end using this piece to
slightly widen it a little bit more to fit this in but I should have never used a hammer
that's for sure so I'm not happy about that but this will still fit it can still be attached
I can still wire the guitar and everything but it's gonna have an aesthetic ouch
that is until I get another one and move everything from here into the other one so
these are on sale on eBay all the time so this one will become a park guitar I guess
this is pretty serious down here also the Dremel liked to gouge some part of it I'm thinking it's
the chuck up here was digging in so I need to fill that little scratch there and I got a scratch so
this part of the install did not go well yeah I'll get it together but it's going to be a
bit ugly and a couple eyesores but more like battle wounds I guess so live with it and move on
and learn live and learn right now I'm thinking maybe ordering that fender
with the Roland built in wasn't such a bad idea but no I wanted to do this so anyway moving on
I'm going to screw this in now of course I need to run the cable from it first these cables can
only go on one way so it's impossible to hook them up wrong now I'm just going to feed this inside
put it around the right way having a screw here might help hold the guitar together
they weren't really thinking about that though they were thinking hey
you know what you should screw the guitar on me not really too worried about scratching the guitar
if I slip at least most of the bottom damage is where I won't see it except for this crack
I'm gonna see that well as ugly as it is wiring up next stay tuned I'm gonna go cry now
