Bending Wood into Impossible Shapes

Make Handmade Furniture
3 followers
8 Video Views·Mar 31, 2026
I built this bed then set it on fire all because I thought it would look cool but I was wrong.
I hate it. I don't know how to fix this because I have no more material.
So in a last-minute effort to save this simple bed design I somehow ended up here.
I think the worst part of this bed is that I got completely screwed over by my client and
this experience almost made me quit designing custom furniture altogether.
Here's a perfect example of why you shouldn't listen to people on the internet.
Normally this is a process that I follow on every single build so I wasn't expecting it to go so
wrong. When I select my boards for each build I will choose the absolute best looking ones for
the areas that are seen the most. In this case it's the headboard or as we say in Australia
bedhead which I was recently told by one of my North American patrons that bedhead means
something different over there. I didn't realize at this point that I was about to completely
mess these boards up all because my original idea didn't work. This bed actually ended up
taking three times as long because of this screw-up and took me on a journey that I
seriously wasn't expecting. The wood I'm using in this build is walnuts and has been supplied
by Britain Timbers. I'll leave a link below to their website if you want to find out useful
information about different timber species. So I mentioned my client screwed me over on this piece.
This all happened back in 2019 and the client wanted a simple elegant design that was one
of a kind. At this point I'd been designing complicated pieces and was eager to introduce
designs that were subdued and easier to build and in all honesty I think it's more of a challenge
to create something simple than it is to create something complex. Music is a great example of
this. Take the Beatles. On paper their songs are fairly simple but writing songs as catchy as
theirs is not an easy task. Now I'm not going to get into a debate about the Beatles like a certain
popular woodworker did recently. I absolutely love the Beatles. You too on the other hand? I mean what
kind of a name is the edge anyway? I'd only been in business for a few years at this point and
wasn't fully aware of all the red flags to look for when first chatting with a client which includes
being manipulated into lowering your price, changing your terms and conditions and getting
overly excited before a deposit has been paid. I'd fallen for all of these in the past but wasn't
aware that my excitement about this project would eventually make me want to reconsider custom
furniture altogether. I got to work on a piece that was aimed at being one of my best. I came up
with a bunch of iterations and after spending way too long on the final design I finally presented
it to the client who absolutely loved it until I told him the price. After some umming and ahhing
he told me he'd get back to me and I never heard from him again. At this point I was mostly annoyed
by the fact that I could no longer build this design. I truly believed in it and desperately
wanted the chance to make it. Fast forward to 2023 and I finally have that chance for a client that I
know isn't going to mess me around. A client who has an appreciation for this design. A client who
also agrees that the edge is a ridiculous name for a guitarist. Yes that client is me. Now I tend to
approach my builds a little backwards. At least I think I do anyway. Whenever I design a piece I
rarely think of how to make it until the design is done which does present some problems as I then
need to reverse engineer the whole build process which can be complicated but in my opinion this
is a good thing because designing pieces based on your current skill level as a maker can limit you
to the things you already know which may stop you from developing new skills. Now sometimes I get
excited during the design phase and come up with ideas that are challenging and unique and other
times I come up with ideas that aren't even possible just like this one. So I'm about to
attach the leg to the side rail of the bed but as per usual I've made this joint very complicated
but I think I've come up with a solution for it so come into my office and I'll show you what I'm
Okay so let's pull up a drawing of the leg and rail detail. So as you can see here the joint
between the leg and the rail is curved. Now this isn't an impossible joint to create in fact you'd
be able to make a perfect fit with some carefully made templates but that's not actually the problem
here. You see if the rail wants to expand and contract and I should say it's going to be a very
minimal amount over a small width like this rail but if it wants to expand or contract then we're
the slightest expansion or contraction in this rail will be obvious as it will want to separate
from the leg resulting in a failed joint. So instead of making the joint with a curve like
this I'm going to make the joint flat like this. Now if there is any movement in the rail then
because the joint is flat there's less chance of separating especially because I'm using a PVA glue
which has some flex to it but this isn't the detail that I'm after because after all this
curved joint is one of the main features of this bed. So I'm going to create a 10mm leg cap
that's the profile that I'm after and simply glue it onto the existing leg being careful not to add
any glue over the joint. This not only gets me the look that I'm after but also gives me a solid
joint and it also allows the leg to protrude slightly from the rest of the bed which is another
cool detail. Okay let's get back to it. So I've actually created two separate leg templates for
this bed. One is the finalized shape of the leg and the other is what you see here with a flat
spot that will neatly join to the side rails allowing a solid connection and I can simply
create the flat spot with my jointer. Normally I'd use my panel saw for this process or I'd use
my slab master for flattening boards but understandably these are some specialty tools
that not everyone has. To me woodworking has always been about creatively coming up with
different ways to make a process work. I know I have a bunch of fancy tools but like you I could
easily drop a hundred grand in any tool shop faster than you can say I need to make a rivet tape.
Being able to use what you have to get the job done is just part of the process. A good example
is using clamps for an extra long glue up like this bed frame. Understandably not everyone has
a three meter long pipe clamp like this but realistically you don't need one. If you have
parallel clamps you can easily rotate the head of the clamp at one end so one jaw is facing up
and the other is facing down. Then simply use another parallel clamp to join them together.
This method works for quick grip clamps as well as smaller pipe clamps but one thing I will
recommend if you're accustomed to pipe clamps and you do large scale work is to purchase a longer
pipe for the clamp. It does make life a lot easier in the long run particularly if you're running a
professional shop. Normally when you're clamping pieces together you want to add clamps to the top
and bottom of the join to help with even clamping pressure otherwise the pressure of your clamp can
make your work bow towards the clamp. But because the shape of this bed is a little awkward it's
difficult to get a clamp underneath so I've simply super glued some timber strips just below halfway
on each side of the leg join. This will help to disperse the clamping pressure across the joint
more evenly and while that dries I'll begin milling up the rest of my material. I have to say
that up until this point of the build I've been thinking back on this experience from 2019.
To be honest I think part of me was still somewhat bitter about the whole thing but
then I realized that I learned one of the most valuable lessons I've ever learned since starting
my business. I began to realize that there is a serious issue when it comes to the furniture
making industry and that is potential clients expect a design before they put money down,
which makes total sense. I mean why would you spend money on something that doesn't exist yet?
The problem is it takes time to come up with a design and there's no guarantee the client will
go through with it. I figured there had to be a better way to not only get paid for my design
time up front but also a way to lock my client in from the very beginning. And in all honesty
the answer was simple as there's a method that design companies use that can also work with us
woodworkers. I actually experienced this with a company that created my first website where
basically they charged me for the design of the website up front then if I chose to go ahead I
would put down a deposit for the work to begin on building the site. Now the reason why this works
is because I wasn't just getting one design I was getting multiple designs that then gave me
the chance to choose what I wanted. I implemented this method into my business in 2019 and it
changed everything. There was no more wasting time with jobs that wouldn't go over the line
plus I was getting paid to come up with designs which meant I could spend more time honing the
perfect piece for my client. I actually have a detailed video all about this process over on
Patreon. I also go into detail about the difficult task of finding out your client's budget during
your first conversation. I'll leave a link below to that video and a bunch of other videos you
might be interested in. The links will show you a preview and if you're interested you can watch
the whole thing over on Patreon. Speaking of which it's thanks to the support of all of these amazing
people that allow me to focus on making more videos. Now the component you see me working on
here is the front rail and it has somewhat of a traditional design to it but that curve in the
center actually serves a purpose. It allows more surface area for the center slat rail to attach to.
You'll see that come together later. I decided to use Festool's knockdown connectors for this bed
as delivery access for this piece is a little difficult and these connectors do provide a solid
join. The method that I'm about to use here does present some complications and involve some serious
forethought. You may have noticed earlier when I was marking out the legs that I have a decent
size offcut but that's not going to waste. I've intentionally ordered my board at this size so I
can get three legs. Now obviously you've already seen me glue two of the legs to the side rails
but this third leg will be used as a leg cap that will get glued to the existing legs as I mentioned
earlier. The reason why I wanted all the legs to come out of the same boards is because I wanted
grain and color consistency. The last thing I want is for the join between the leg and the cap to be
an obvious one but walnut can present issues as it's notorious for sapwood which is a much lighter
color to the chocolate brown walnut is known for. The differences in these colors would make the
joins noticeable and even though I've marked out my best faces the further you cut into a board the
more chance you have of exposing underlying sapwood. Now there was certainly some sapwood on one face
of this board but luckily I had the forethought to dodge it all when I was marking out my leg
templates. I just wish I had this level of forethought when it came to the headboard.
So I've been looking forward to gluing on this leg cap since starting this build but I'd be lying
if I said I wasn't nervous. A lot can go wrong here I mean for those that don't know when you
glue two pieces of wood together they like to slide around which in certain instances is okay
but not here. This glue up needs to be perfect and the way I'm going to achieve this is with dowels.
I'm able to use the domino hole to drill through the leg into the cap giving me two locating points
being very careful not to drill through the cap because drilling through the leg cap at this point
would most likely make me question everything and I don't just mean on this build I mean in
life in general like why did I choose this career if I can't drill a simple hole and what would
have happened if I paid more attention in class? Could I have tried harder? What did my high school
crush really mean when she called me an idiot? Is the universe truly infinite and if space aliens
could see earth from 65 million light years away does that mean they'd be able to see dinosaurs?
Good thing I didn't drill through that cap. This dowel needs to be glued into the leg ensuring
that it doesn't protrude into the domino hole on the other side then I simply use an MDF packer
to cut the right depth for the dowel to fit into the leg cap. You'll notice that I'm not applying
any glue over the join where the leg meets the rail and this is to avoid any issues with movement
if that rail does want to expand and contract it's not hindered in any way by the leg cap.
I mentioned that I was nervous about this step and rightly so.
I feel like these nerves allow you to cautiously approach a step with a heightened sense of
concentration. This allows me to pick everything that can go wrong and eliminate the possibility
of that happening and it worked because this step turned out the way I was hoping it would.
This actually serves as a good example because I wasn't nervous about the next step and I feel
that some extra concentration would have stopped me from making a decision that involves a ton
of extra work. It's the obvious details that get little attention. This is the trap that I
fell into when routing the edge details for the bed. Realistically speaking there's only
so many edge profiles that I can choose from but each one serves a different purpose. I like to
think that the edge profile whether it be a roundover or a chamfer is where you can give
your piece some personality. Picking the correct profile wasn't the issue here as I knew exactly
what I wanted to go with but not knowing where to stop resulted in way more work and in my opinion
could have looked better if I hadn't done this. Basically I should have stopped the edge profiles
just before the join where the leg meets the rail. These two transition points mean a lot of filing
and pairing to make the two different roundovers meet. This would have looked better if I had given
it more thought. Now once upon a time this is something that would have really annoyed me and
if you can't already tell I'm a bit of a perfectionist which means if my piece doesn't turn
out the way I want it to then it wears on me. In fact when I was younger I wouldn't be able to get
mistakes out of my head and I would consider myself a failure. These days I'm experienced
enough to know that mistakes are simply a new lesson to learn. Understandably this edge detail
isn't a big deal but I'm sure the younger me would have overthought it. Unfortunately this is
the mindset of a perfectionist. If it's not perfect it's a problem but being a perfectionist does have
its benefits in the fact that it allows me to think outside the box and come up with different
solutions to make ideas work which brings me to my next idea that not only saved a bunch of time
but in my opinion looks pretty good too. As I just mentioned it's the obvious details that get a
I've always been a fan of hidden details on a piece of furniture. Details that aren't seen from
the outside but surprise you when you look a little deeper. The slats of a bed are usually a second
thought or not even a thought at all. I'm certainly guilty of this and I'm not saying that my version
is anything special. In fact what I'm trying to do here is create the simplest way I can possibly
think of to position the bed slats into place by using this jig. The holes that I'm drilling out
will perfectly fit the width of the bed slats and stop them from moving around. I can then use a
template to drill out holes in one side of the bed then by flipping the template over I can drill out
the same hole pattern on the other side of the bed. The dowels will then hold each of the slats
into place. I do think this looks neat and it acts as somewhat of a feature to look at every time I
change the bed sheets but if you really want to see a hidden detail that will take you by surprise
then you need to check out the works by the Australian furniture maker Jeremy from JD Lee
Furniture. His attention to detail is incredible and I'm a big fan of his holistic approach to
furniture making and design. His ability to get the most out of every component is inspiring which
is one of the many reasons why Jeremy is one of my favourite furniture designer makers out there.
I'll leave a link to his Instagram below. Now the process that I'm going to attempt next wasn't so
easy. You may actually recognize it from one of my past videos back when I didn't do voiceovers.
Its complexity seemed to create some confusion so hopefully I'll be able to shed some light on
this unusual technique. Now the bed is technically finished at this point. I see this as a blank
canvas where I can get creative and turn this headboard into a truly one-of-a-kind piece.
This is one of the coolest router tricks I know but unfortunately this entire build is about to
take a turn for the worse and where my earlier advice of selecting the best boards for the best
areas is about to slap me in the face. I have my router attached to a shop made radius jig which
is going to allow me to make the curved template I'm after. I'm using a six millimeter router bit
to cut two sides of a circle. These will eventually fit perfectly back together but
this is where things get a little confusing. You can see me routing out the circle template.
One side of this template is going to be the cutout in the headboard and the other side is
going to get transferred to another piece of wood that will fit back into the headboard cutout.
The problem is the outside of the router cut and the inside of the router cut are at a different
radius to one another as the thickness of the router bit has removed valuable material. The
trick here is to replace the material that was removed by the router and I'm going to do this
by planing a piece of wood that's exactly the same thickness as the router bit. I can then simply glue
the six millimeter wooden strip onto one side of the template filling in the material that was
removed by the router. I now have a perfect positive and negative curved template that's
ready to be transferred onto the headboard. It's kind of strange looking back on this footage
because I had no idea at this point that I was about to ruin the best two pieces of walnut I had
for this bed and the worst part is that I had no other material to fix it. But I guess the bonus is
that I now get to play with fire. I've been excited about this step for months and as I said earlier
the perfectionist in me likes to plan out all the potential pitfalls before they happen. I knew that
these boards would warp due to the heat so I've used some oversized walnut offcuts from another
job. I decided on walnut because I ran tests on some different woods before going ahead which
didn't give me the look that I was after. I noticed on white oak and Tasmanian oak that the wood wanted
to split more than with the walnut. I'm going to be honest it's a little painful setting walnut on fire.
Here in Australia walnut is one of the most expensive woods you can buy so setting it
feels like I should be sent to the woodworker's naughty corner but you're about to see just how
cool it looks. So this has actually turned out better than expected. It's got the exact sort of
detailing that I was after because I didn't want to get any splits in the wood. I really just wanted
that sort of scale effect and for the fire to pronounce the grain a little bit more. Now off
camera I used the brush from my shop dust pan to wipe down the surface a little bit and get rid of
any loose charring so I think it's pretty safe to say that brush is now ruined but whatever.
Also off camera I applied a coat of Fitties hard wax oil in a matte finish and that was in the hopes
that it would stop any charring from coming off on your fingers which it worked incredibly well.
I was not expecting that actually which is why I did it off camera but yeah very happy with that
result. So the next step from here is to flatten the back sides of these boards because of all the
heat that was introduced it's actually warped the boards a little bit. It's not a big deal but that's
the next step going forward. All right so even though the charring effect had turned out exactly
the way I wanted I had a sneaking suspicion at this point that it wasn't going to work with the
design but I continued to push forward as I was still hopeful and after all this was the last
thing to complete on the bed before I could call it finished and begin applying the oil. What I
didn't know is that this was actually just the beginning of the bed build. You can see that I'm
using the template I made earlier to get the exact radius I need to be able to connect the charred
wood to the headboard. I'm using one of my smaller pattern bits so I don't remove all of the material
at once. The last thing I want to do here is remove too much and chip the charred face.
Thanks to my sneaking suspicion earlier I decided not to commit to any fixings at this point.
I'm going to use a less permanent solution to attach the pieces together and that's just using
tape and super glue. As each piece began to slowly come together my concern for the overall look of
the bed began to increase but I still had the voice in the back of my mind telling me that
everything is going to be fine and that I just need to stop worrying. But once fully assembled I
realized that the voice in the back of my mind is an absolute jerk and was completely wrong.
Okay so it's all done but I hate it. I mean I don't know why but it just doesn't look the way
that I thought it would look so I don't know check it out. So this just doesn't look right to me.
I'm going to set this camera up on a tripod. So I do think this is a great technique. I mean it
turned out exactly the way that I wanted it to but it just doesn't fit this piece. I think it's
too intense. I'm pretty annoyed right now that I've just used my two best boards out of all of
this walnut and put two massive cutouts in them. But I don't know it's like six o'clock on a Friday
night so I think I'm just going to go home and have a think about how to fix this and hopefully
have an answer by tomorrow. So after I picked my ego up off the floor I went home had a beer or two
and managed to come up with two more ideas. Okay maybe it was three or four beers. So I had one
easy idea and one ridiculously complicated idea and seeing that I was getting pushed for time I
decided to go with the easier more subdued idea. At this point I'm grateful that I didn't throw out
You may have seen me do this textured detail before except this time I'm using an Arbortech
ball gouge to try and get a more consistent textured effect. It's kind of strange how much
thought goes into a pattern that's supposed to look completely random but basically the way I'm
achieving this look is to create one indent then cross-section it and repeat in random areas around
the working area. Now I do have a better feeling about this option but I still have no idea if
it's going to work. Not until it's all together anyway and the reality is I'm starting to get
annoyed about how long this bed is taking as it should have been finished already and I'm keen to
start on my next project which is my interpretation of a Rubo workbench. So be sure to subscribe if
you're keen to see that video. One of the sneaking suspicions that I'm having while creating this
textured detail is that I've done this before. It's nothing new and the whole reason for originally
doing that charred wood effect is because I hadn't used it on my furniture before. I wanted
this bed to be different and I'm beginning to feel like it's just another one of my pieces.
This looks way better to me. I know that the textured detail is still pretty intense but I
think the fact that everything is the same color really helps to tie it all in together.
But like I said earlier I did have a complicated version of this headboard design and I don't think
it'd be one of my videos unless I over complicated things so let's get into it. This is a steam box
and its sole purpose is to help bend wood into shapes that aren't normally possible without this
process. Now I think it's safe to say that I've given up on my time frame at this point. Even
though I like the simple texture detailing I just created I feel like this next idea is going to be
worth the extra time. I've managed to use a bunch of offcuts that I've machined down to just over
three millimeters thick. Now thin pieces like this are usually pretty flexible but I'm going to be
bending these beyond their usual breaking point so this process is essential. Exposing wood to
steam in a controlled environment like a steam box helps to plasticize the wood by softening the
lignin allowing the wood to bend into unusual shapes. Once the wood cools it stays in its newly
formed shape keeping in mind there will be some spring back but you're essentially reforming the
grain structure of the wood. I have a video explaining this entire process on my Patreon if
you're interested. The form I'm using to create the bends is the exact same shape as my headboard
with rough markings of where I want to clamp the walnut strips and just when you think you
bend anymore it just keeps going. I'm normally fairly calm during glue ups maybe I can put that
down to experience but this glue up was freaking me out. There's still so much that can go wrong
and I've officially reached the point of no return. A mistake now would mean having to redo the bends
which isn't something I'm too keen on. I'm using a two-to-one resin called techniglue. This sets
hard which is important as I don't want any flex in these bent wood strips. White glue isn't going
to match too well with walnut so I'm adding in some brown oxide trying to match the color of
the finished walnut not the raw colored walnut. It's important to note that I've pre-finished the
insides of each of these strips with fitties oil obviously not oiling any areas where I need the
glue to bond. This is a step that's going to make life a lot easier later on as it's going to be
almost impossible to apply finish once everything is glued up. I've added in some dowels to help
locate each strip into place and then wrapped the glued areas in some plastic roll to stop the glue
from getting everywhere and to stop the strips from getting stuck to the form. I originally
thought that I was only going to make three main curves to this headboard but realized it needed
another one and then another one. I think it's safe to say that this bed has not only exceeded
my expectations but it's turned out to be one of the coolest pieces I've ever made. Woodworking
provides time to reflect whether you like it or not. I think that's why I've never really met a
highly strong woodworker. We all seem pretty down to earth and as I had plenty of time to reflect
during this piece I couldn't help but think about how we face challenges throughout our careers and
our lives. The journey of this bed started years ago that left me feeling angry ripped off and
disrespected. The fact that I spent my time and energy trying to create the perfect design for
someone only to never hear from them again was defeating. But the reality of being a business
owner means that you need to adapt otherwise you'll never push forward. What started out as
defeat turned into the biggest and most successful change I made to my business. Learning to charge
my designs up front changed everything and I owe it all to that client. The process of building
this piece was supposed to be simple but it evolved into something that was not only challenging
but also allowed me to develop a new skill set.
