Roland GR-55 Expression Pedal EXPSW Setup

TheGospelGuitarist
1 follower
Mar 29, 2026
Instructional video on how to setup the expression pedal switch. This covers a secondary setup which works along with the EXPON switch tab. This setup can lead you to very cool ideas!
Hey Gospel Guitarist here with another installment on the Roland GR-55 guitar synthesizer.
To start off I'm going to recap the last two videos I did concerning the expression pedal setup
because it's vital to understand those first before I enter into the expression switch
tab right here. I've already done videos on the control and I'm just going to quickly go through
these so that you can see what my setup is doing. Right now I am in my user patch for nylon guitar
with strings which involve just a string section and a contrabass string section.
So of course you enter the edit mode and then go into your control GK control pedal setup.
Hit enter and it brings you back here. So real quick okay I'm not going to explain everything
on these because I already did videos on these. In the expression pedal you're setting up the
function of the pedal itself okay not the switch underneath only the pedal. When you move the pedal
up and down what do you want it to do and there's a whole bunch of things you can have that doing
and on my patch I'm doing tone volume for my string section not my guitar. So the string
tones are turned on and my modeling tone for the guitar is turned off. So we page over
to the expression pedal on function. While the on function is turned on when you step
with your toe hard enough to turn on your expression pedal light right here next to
your pedal. When that comes on whatever you assigned it as a function it will start doing.
So if it was like a volume pedal you could change it into a wah pedal.
On my patch I have it set up as a pitch bend covering an octave so I can go from a normal
note to an octave higher. When I turn that on that's an important thing to remember is the
expression on the light will come on because you step on the switch. Now here's where it gets
interesting. Page over to expression switch. Well didn't we just cover a switch? Yes we did.
Now I would have called this exp on 2 because that's essentially what it is. It's a second
setup that you can make active when you hit one switch. So right now mine is set to default in
the off mode. So that means it's just not going to use whatever I program here. It's just not it's
just going to ignore it. So when I hit the on switch it's just going to turn on my pitch bender
and that's it. But if I turn this to on now you can see where it says on. That white line doesn't
show up. Help it all on camera. So and I have it set to a delay switch. Now you have all kinds of
things in here that you could set this to. Your reverb, amplifiers, multi effects, you know all
of the things that you could assign your other expression on switch to apply here as well.
So I have it set to a delay switch and the light has come on over here because I turned it on
in the program. So for now I'll turn that back off. So when you hit the switch with your toe
on my patch two things are going to happen. Number one is going to go from a volume pedal for my
strings. It's going to turn my volume pedal into a pitch shifter for pitching up to one full octave
and at the same time it's going to turn on my delay all with hitting my toe switch
underneath my pedal. So think of xp on as the first operation and the xp switch as a secondary
operation. So you want to make sure that that's off because if you're just doing some things you're
not going to want that switch to be activating other things in here. So its default setting is
off but you can open a whole wide array of things here. It took me a little while to figure that out.
The manual didn't help a whole lot on this. They gave the usual list of things that you can assign
to it but not really how it's used. So now that is how it's used. It's basically a secondary setup
for the same switch that your xp on switch is which is your your pedal switch. So I hope that's
clear as mud. Just for a little demo here let me get out back to my patch. I do have my guitar plugged in
and so if I back off the volume pedal and the switch is turned off
I have my nylon guitar
okay
now as I turn the pedal I step on the pedal and
pedal is actually on the music stand right now so I'm using my hand to adjust the pedal
so that's a strings section volume so I can bring the strings in and bring them out with my foot
and if you notice no delay I do have reverb now if I push the pedal on
now the pedal is going to change its function
my pitch my pitch bender and you have a delay going
okay
and the pitch bender is only going to affect my string section because that's what the pitch
bender is assigned to and the delay is only going to affect my nylon guitar because that's what
that's assigned to so I can got a lot of variation that I can do with this patch now
so I want to thank the viewer for can't remember what you called yourself but here's your new video
I had somebody kind of a fan saying he liked my videos wanted to see this next so I finally got
this out and I hope you like it and I hope it everyone else finds it as useful as I have
and it's been a learning experience and it's been a fun morning playing with my gear
so get yours out and start playing with yours you can do some pretty cool stuff with it
don't forget to subscribe and like and share the video thanks for watching
