Connecting A Roland GC1 Guitar

TheGospelGuitarist
1 follower
Mar 29, 2026
Instructional help on cabling your Roland GC1 MIDI guitar to your rig. Answering the question: "Do I need to use 2 cables?"
Hey, Valsipitars here and with the promised video I've been getting a few questions about the
Roland GC1 GK3 equipped Stratocaster because it has a MIDI cable output and a traditional
quarter inch jack that connects to the normal guitar. As you can see I'm just using the MIDI
cable right now. I think the confusion is that in getting our gear a lot of times we really don't
like to read things before we start playing with them and it helps if you're going to use a synth
to read up on this stuff because there's so many options that you can do. But I have my GR55 sitting
here on top of where I can reach it real quick for you on top of my Roland JC120. I'm running the
stereo synthesizer outputs into the return effects jacks on my amplifier so all I'm using is the two
60 watt amps that are inside. The front preamp section of the guitar amp is completely bypassed
when you use it that way. So all the synth sounds that you're going to be hearing are coming out of
the GR55 going into the stereo return and
playing through the...
I got it set to a string ensemble just so it really is obvious.
So the synth sounds no matter what sounds I were to do in a performance of some kind
would be coming out of this amplifier or I could have it the same connections running to a PA
mixer or I can run it into an acoustic amplifier. For the purposes right now I'm using the
the JC120. It sounds good. It's almost as pristine as an acoustic amp. The acoustic amps sound a
little better because they got a tweeter on them so the nylon guitars the really high frequencies
of the nylon strings you'll hear that a lot better and they'll have a more authentic sound.
So what happens is with just one cable I'm able to route my two systems. Now I'm also
running this half stack sitting here for the actual guitar mags and you're probably wondering
how is that done when you're not plugged into your quarter inch jack?
Well the GK3 system that's built into the guitar I think it's line number seven on the
MIDI cable but don't quote me I'm not going to swear that's the right number.
But one of the lines inside your MIDI cable is actually carrying the output of the actual guitar
okay and it just takes that signal and it runs it to your synthesizer. Now I don't know about
the other synths that are out there so don't ask me about the other synths but the GR55 has a guitar
output jack so the guitar signal is routed through the MIDI cable into the synthesizer
and at the synthesizer is where I can break out my guitar signal by running a guitar cable
over here into my input on my normal guitar half stack or combo whatever I'm using for my normal
guitar sounds. So with this little switch if it's all the way down I get this guy over here
if the switch is all the way up
I get only the synth sound. If the middle
if the selector switch is placed in the middle then I'm running both amps at the same time
just the sounds with the volume of the synth or the volume normal guitar amp and then the
middle one is a tone control for your guitar. So that takes the mystery out you don't need to run
two cables at the same time. The other option here would be to just use this as a normal guitar where
you don't use the MIDI cable and you just simply run a guitar cable to your guitar amp and in that
case this switch has no effect whatsoever but when you're using it as a MIDI guitar you do not need
to use a second cable for your guitar rig. On the GR-55 I can also simulate my guitar rig
without this big bad boy so I can set this up inside right now it's set to just pass my guitar
signal don't even mess with my guitar signal just shoot it right back out that jack and don't touch
but I can also tell it to put amp modeling cabinet modeling guitar modeling on that jack's output
so whatever is going out and hitting my amp which in this case I wouldn't do it because it's a
half stack but I could route this out to an acoustic amp and have acoustic guitar simulation
while I'm using a thin guitar or normal electric guitar or if I want to do
different guitar rigs maybe some songs I want to fender twin tone and other with a tele and
then other songs I want to you know Marshall stack with a Les Paul I can program those in here for
the song sets and then run the guitar output to an acoustic amp or something like the JC-120 that's
really clean and it'll recreate the actual sound of those stacks without carrying a Marshall stack
and a twin to the gig and an acoustic amp to run the synth so you can do it all through one rig
so you got your options but you need to read up on this stuff very carefully on the manual it's
not real crystal clear especially on gr55 it can get a little tricky because you got a master
setting for your guitar output but you also have individual settings for each patch that you need
to set up so like on this strings patch it's set up to pass my guitar tone straight through the
unit and that's how I've done most of what's in my box but that's the questions usually you know
do I have to use two chords that's really cumbersome and no you don't you just need one
but you do need to learn how to use your guitar out on your synth I hope that demystifies how you
can set this up it's really pretty cool and it's really not that hard once you get used to doing it
and lots of options so and on the guitar itself if you haven't seen the play test of the acoustic of
the pickups I just released a video demo on that
