Roland GR-55 CTL Boost Setup

TheGospelGuitarist
1 follower
Mar 29, 2026
How to setup the CTL pedal to become a solo boost switch on the Roland GR-55.
Hey Gospel Guitarist here. I had a question the other day about
when you're using your GR-55 Roland synthesizer, how can I add a boost to my tone for lead solos
and such? And a lot of us when we're soloing we'll hit a pedal just on overdrive or whatever
to kick it up a notch. Well we can do some pretty cool things inside the GR-55. So let's take a look
inside and see what we got to do to set this up. Okay what I did was modify the Les Paul Plus
Stack patch that was in the rhythm section and proceeded to learn how I can set up a boost in
here using the control button on the pedal board. As you can see I've renamed it to Les Paul Stack
and Boost and I've saved it in my user section. So what we need to do, I'm just going to go back
into the patch and show you what I did. When you edit, hit the edit button and you'll default to
wherever you were last but you want to be in your tone settings. And here there's some pads set up
and you got your electric guitar as a set as a Les Paul. So if you skip over to your effects tab
you'll notice that I have a compressor now set up on the multi-effects section.
So if we skip down here, now the multi-effects and the mod can be modulation sections can be
attached to your control switch, your CTL switch on the unit. So when you hit the switch you can
turn whatever you have this set to on and off. The easy way of doing this would be to use a compressor
because on a compressor you've got your gain setting and you can control how much gain you
want and for lead solos having low compression is nice to get a lot more sustain. So I figure
well just go with a compressor and if you hit the arrow button and pan over you can set your effects
level you want 100 and then here you got your attack and threshold and your important gain
control. I find plus three is a pretty decent change in volume level it's definitely noticeable
without blowing your head off and so that's one way to do it is to pan over here and set
your gain. I have it to three it goes up to plus 18 or to zero so it's default at three
and it seems to work fine I haven't touched anything. Okay so now what you want to do is
you want to page over to your effects tab once you get your compressor set up and another thing
real quick while you're setting up your compressor if I can get this back over here
you can play I'm playing through a Karvin acoustic amp right now
with and without the gain change and if I hit the control button
so you can hear the difference in the volume so if I crank this up to like 15
strike a chord here hit the control switch
that's pretty drastic I know you're not going to want to kick it up that much
but just for the illustration here
and so you can play with this back and forth until you're happy with where you want it
and then you can save the setting but before you do that you're going to want to page over
to your master tab and enter your pedal gk control section so hit enter and the control status
is defaulted off because you're probably not going to jump right into a lead solo
hit the down arrow and here you have your control function multi-effect switch so I'm setting the
control to function with the multi-effect switch I can set it to my modulation switch my amp switch
your tone switches a whole set of stuff that you can do but you want to set it
to your multi-effect section that's where we're setting up our compressor to give us the boost
so we want to assign that compressor to the switch as a function and set it to off so that when you
save the patch or switch into this patch it won't be turned on it'll be off when you hit the patch
then when you need a boost you can turn it on and at this point you want to write
to wherever you're saving it and give it a second to do that and then you're done that's it
now a little trick I wanted to show you that's what I did there
another way you can do this which is actually pretty cool you can hit the edit and page over
to your effects and back here where I have compressor set you can go in here and start
changing all kinds of things you can set up right here a guitar amp simulator so I can change this
from a compressor just being a compressor stompbox I could actually set up an entirely different
guitar amp now as you see up here it's a this is a Marshall 1959 one so I can change this effect to
whatever other amp I want to use in here so I can go over here and you've got your amp settings
so here's a mess of boogie I had it set to clean and you've got a JC 120 clean which is a fender
I believe the fender twin matchbox and mess a boogie and then back into your Marshall amps
Marshall 2 Marshall 1 and 2 Soldano your 5150 let's say I wanted to go with a 5150
so instead of using a compressor now I'm actually using another amplifier model so it's actually
like I'm playing rhythm guitar through a Marshall stack and then when I go for my solos I hit the
control button and now I'm playing through a 5150 stack for a completely different sound and you can
adjust your volumes your master volume and what kind of speaker setups you want different cabinets
are in here so just a 412 and then I can write that and save the patch so now I'm using actually
two completely different amps so let's see what does that sound like your normal stack here
I know it's not mic'd up but you'll hear a difference here
so there's a lot of gain but the volume is down so I'd have to go back in and turn the volume up
and get the volume difference the way I want it and this way we can just set up the different
a completely different stack we'll run this volume up a little more here
I don't know how far I gotta go on it the master we'll just throw it up
so whatever you want to do you can set up two different modeling amps in one tone
or just use like the compressor to kick up the tone that you're already using
and that way you don't have to set up another tone stack and switch like to a completely
different patch you can do it all in one patch using one tone within the patch so
that's a lot of flexibility actually so I thought that was a pretty good question
posted to me and I went in and did some digging on how to do it and this is the answer so many
of us use the boost especially if you're out there rocking and rolling so that's how it's
done in this unit I hope you found the video helpful educational and if so please like my
channel and subscribe and post questions because that's what causes me to dig in to the unit so
that's basically how you set this all up on the system and that's how I'm learning to use it
people ask me questions or I come up with a real life scenario what do I want to do with this
and then I have to come up with the solution so if you have questions please post them
rock on thanks for watching
