PreSonus Studiolive 16.0.2 Copy-Load-Save Pro Tips

TheGospelGuitarist
1 follower
Mar 27, 2026
A few tricks you may not know. Tutorial on using the Copy, Load and Save Fat Channel buttons to copy Fat Channel setting to other channels using two methods of execution as well as loading and saving channel presets.
Welcome to my series on the Presonus StudioLive 1602 digital mixer. In this video
we're going to be covering the copy load and save functions within the fat channel right here and
a couple options that you may not know about or be aware of that you can also do
And we're going to be talking about how to copy one setting to another channel
so I see you're on channel one and
You want to load a favorite preset and say you're just setting things up and you want to zero out things get you got a zero
Out option on the board, but that puts everything to factory reset
You may have your own settings that you want to start out with so
You're going to push the load button and it's going to stay lit and then you're going to go up to
your selection up here, which is now going to read that it's a channel preset memory P1 and
Like I have one says start setup
You might have a drum setup or mic setup mic startup, whatever you want to call it. It says load to channel strip one
Push recall so over here to the far bottom right of this pad. You've got a recall button. So you push it
It recalls everything from your setting to channel one
Now you can select any other channels. So let's say I'm messing with a drum set
I might want to do the first four channels this way. So I would go to channel 2 next and just push recall again
Because the load is still lit go to channel 3 press recall go to channel 4 press recall
So now channels 1 through 4 have all been loaded with my starting setup point
To make my mixes a little quicker and not take so long to get things set up on the stage
now along the way what you can also do is
You can copy and save so
That one covers the loading and until you push it again
It's gonna stay in a loading mode. And once you on
Once you push it a second time, it'll flip it back to the effects setting on your screen
So you may be doing some things to channel one that you like and you want to say this is a new a new startup
So what you would want to do then is go to your channel
section in your fat channel and press the save button and then your display up here is going to change and
It's going to allow you to name
your setting and you can turn the knob here to pick a
Preset so that's how you can save anything you that you come up with
Over here copy when you hit copy. It's gonna pop the load button up there flashing
And so as you can see I was on selected channel one and all the other channels are now flashing select
So I can copy channel one setting to any other channel
I wish and once you pick it like let's say I want to redo channels one two, three and four
With this new setting I've come up with
So I push copy load is sitting there waiting for me and I've selected these three channels
Press load and all of those settings are now copied to channels two three and four and
The save button is lit up again. That's where I left off
So there's a lot of things and a lot of power
To your copy and load and saving options so that you're not always
Chasing the same scene over and over and over again and name them whatever you want
So that when you start setting up a stage
You can just recall these startup points for every instrument on stage without having to redo what you've already done
And it makes everything go by a lot faster
