Lasko 3353 Breeze Machine Fan | Initial Checkout

TV Electric Fan
2 followers
8 Video Views·Mar 28, 2026
The initial checkout of a Lasko Breeze Machine fan model 3353.
AI Generated·May contain errors
Hello viewers, today for the initial checking out of, we have another Lasco
Breeze Machine, or the Breeze the Machine. This is very similar to, if not identical to,
the one I picked up a few weeks ago, but this is a different color, and of course,
for whatever psychotic reason, you know, I've got to have all the colors.
This one is in a little bit lesser of condition. It's missing the
speed control knob, and it's missing one of the
tilt adjustment locks. That, I don't know if we're going to be able to replace.
The knob, I could probably find something that would fit on there just fine.
That's certainly not a work stoppage. So, this I acquired at the Savers,
or the Discarders, for five dollars approximately, which I think is pretty reasonable.
I've overall been pretty happy with that Discarders store. The prices are much better
than at the OK Will. I've noticed over the last couple of months, some of them more than others,
some of the stores more than others, the prices at the OK Wills are going up significantly.
So much so that there's been a bunch of things I've just passed on because the prices were too
high, or I'll let it sit there for a couple weeks, and then when it goes to the color of
the week half off, then I'll get it. And of course, nobody else has bought it in between
there because it's too expensive. I've also noticed that the OK Will stores are now open
even later. I think the ones around here are now open until nine o'clock at night,
which is very convenient, but I'd rather close early if that comes at the cost of all the items
being priced too high. But anyways, so Savers has kind of been my go-to place lately
for equipment. This is, I forget what the number, the model number is on this thing. I think it's
supposed to be on that sticker right there, but I can't see anything on it anymore. It's faded.
This one's pretty dirty. It's actually really quite caked in there. This would make for a
very good cleanup project. It's got a lot of hours on it, and it was probably used in a gross
environment. Bearings seem plenty free though, which is a good sign. As I said in the other
video, I'll just go through it again for those that didn't see that video. I'm very fond of
these. I think these are a near perfect embodiment of an economy-grade product. This is a cheaper
unit. It costs less. You can see it was clearly built down to a price. There's a tremendous amount
of plastic, and it's, I wouldn't say that it's super flimsy, but it's, you know, not particularly
strong, and no frills, basic, you know, only two speeds, etc. But it still works pretty well.
Moves a reasonable amount of air, reasonable amount of noise. It's affordable, and it lasts.
These are not that uncommon, and these have been around for 20-30 years, and plenty of them are
still going. And they're still on the market to this day. I doubt that they're as good as this
one is. I'm sure the motors have gotten cheaper or something, but the fact that the design has
been on the market for the better portion of three decades or four decades speaks volumes
about the product, the way it sells, and how the consumer likes it. Here's the plug. It is a
polarized plug, but it is non-fused. This is pre-fused plug freak show era,
although, and maybe this is not a common take, but I don't really have any objection to fused
plugs. In fact, I think a fused plug is a very reasonable and very effective additional layer
of safety. And the fused plugs have been out for some time now, and, you know, 10-20 years later,
at least I don't ever come across fans that are thrown out because the fuse went out.
In fact, out of all the fans I picked out of the trash and picked up used that didn't work,
I can't recall a single instance where the fuse and the plug had gone bad.
So I'm quite fond of fuses. I think they're very simple and very reliable and very effective,
and that's the type of equipment that I like. All right, we are testing at 118.4 volts.
I'll switch it over to the watts, and this is rated for .65 amps. So this is not efficient by
any stretch of the imagination because it has the infamous C-frame shaded pole motor. And while I
still don't understand how these motors are even allowed to be sold in fans anymore, I at least
understand why it was chosen for this particular unit, because it's a cheap economy-grade fan,
and it's a cheap economy-grade motor to go with it. This is a little bit difficult to shut it on
because the, um, no, it's not difficult to shut it on. Okay, that's cap. Scratch that.
So we're going to start with the number one, which is the second position on the knobless switch.
There's the number two. Kind of looks like a Z.
The one. Well, it doesn't sound great, that is for sure. It does not sound great at all.
See if it picks up speed enough to operate properly. Seems to be picking up some speed.
It's so caked with the dust that it's not going to work properly anyways, but we did get a good
deal because that was a lot of dust included for free. That is .34 the amps, 21.9 the watts, which
isn't too bad, um, but as, as I often say, you can run a Galaxy 2150 on low, which moves way more air
than this does, for only 19 the watts. This has a power factor of .55, which is very low,
but not particularly relevant in the residential application because you're billed
by wattage, kilowatt hours. There's two, and it is trying to operate on two,
but it is moving no air at all. And that is a statement made with no exaggeration,
is moving no air. The movement that you're seeing on the paper is from the heat pump.
It is not from this. Now these do have a weird aerodynamics glitch sometimes,
where the air just kind of stops, and the fan blade increases in speed substantially,
and I wonder if that's what's going on right now, and it's being induced because of how much dust
is on the blades. Even the one sold today still has that aerodynamics glitch, and it's kind of
funny because you'll, you'll get some people in the reviews that talk about it, so it's fairly
widespread, and certainly at some point during the R&D phase, it must have happened. And you
have all, it's, this baffles me. You have all these people sitting around, you know, discussing
this product, and they know that this is an issue, and it just says, okay, sell it, it's good to go.
Unbelievable. On the high, that is 32, the watts, dot 51, the amps, or the power factor of dot 53,
which is very, very poor. Now 32 watts is not too egregious, but you can run a 12-inch
oscillating fan that's, will push way more air than this for the same amount of power. So,
as I often say, it just doesn't make a lot of sense to build these with
the C-frame shaded-pole motors. Could have put a PSC motor in here, probably not drive up the
cost much at all, and it would use a fraction of the power, a third to half of the power,
for the same performance. Well, there's not much else to see here, because it's not working.
Well, it's turning, but it's not doing anything. Well, we'll get this cleaned up. It's just totally
clogged. Once we get it unclogged, it'll be a nice, quiet, relatively powerful,
and somewhat expensive-to-operate, economy-grade fan.
