Want to QUICKLY calculate initial fluid rates? Or rapidly estimate what a baby needs to eat every 3 hours at full volume?? Watch this video, and then thank us for saving you so much time!!!!! --------------------------------------------------------------------- Please be sure to give us a like, comment about future topics, and subscribe to this channel to stay up to date on all things NICU! Also, click the notification bell after you subscribe to gain your weekly NICU knowledge as soon as it's loaded! --------------------------------------------------------------------- Dr. Tala is a board-certified neonatologist and has worked in busy level III and IV units for the past 15 years. She has won multiple teaching awards throughout her time as a neonatologist. --------------------------------------------------------------------------- ***TIMESTAMPS*** 00:40 Estimate initial fluid rate 03:17 Estimate full volume feeds ---------------------------------------------------------------------------- Music: www.bensound.com (royalty free with credit) ---------------------------------------------------------------------------- *Disclaimer*: This video is intended for educational purposes only and while we strive to give the most accurate information, errors may occur. Subsequently, this video should not be a replacement for medical advice.
AI Generated·May contain errors
Hello, welcome to Tala Talks NICU,
where we break down complicated medical concepts
and make them super easy for you to understand.
Today's video is a really short one,
but it's going to be a really, really helpful one.
Today, I'm going to go over two equations
that I personally use all the time
and they create a really good shortcut.
In fact, part of me didn't even really want
to do a video on this because I feel like people
just think I'm making these calculations
really fast in my head.
So watch on and we will save you time in the NICU.
The first equation is a very quick calculation
to kind of estimate what you can run the initial fluids at.
So when a baby is being admitted,
it's normally a little bit chaotic.
Somebody's weighing the baby,
somebody's setting up the respiratory equipment.
Very often the doctors and the practitioners
disappear off somewhere to write orders.
So either you're the nurse and you can't find somebody
to write the orders,
or you just want to kind of get those fluids started
before the baby becomes hyperglycemic.
So this is a very good estimate of what the baby may need.
And this is the simple equation.
Take the baby's weight in kilograms
and multiply it by three.
And that will give you the MLs per hour
that you need to run the fluids at,
whether it's starter TPN or admission TPN,
whatever you call it, your institution,
or whether it's just D10.
So the baby's weight in kilos times three
is what you run the rate at in mils an hour.
And I know you know this, but that's because 24,
which is how many hours we have in a day,
times three is 72 MLs.
So basically, if you're multiplying the weight by three,
then you're roughly giving 72 MLs per kilo per day.
Like we'd already discussed,
a term kit generally needs a little bit less than that,
kind of closer to 60 MLs per kilo per day,
so you can round down.
And a preemie baby often needs more than 72,
kind of 80 or even 100 CCs per kilo per day,
so you can round up or just add a little bit extra to that.
So let's go over a couple of examples.
I know that this is super easy,
but we're just gonna bang that point in.
So you admit a three kilo baby
and you want to run fluids at a certain rate
before somebody decides exactly
what that needs to be set at.
So three times three is nine,
you run it at nine MLs an hour,
which is about 72 MLs per kilo per day.
Another example is you've just admitted
a 30 week, 1.2 kilo baby.
So 1.2 times three is 3.6 MLs an hour.
But you maybe want to give a little bit more
for a preemie baby,
so you randomly round it up to four MLs an hour.
Four MLs an hour gives 80 MLs per kilo per day.
So pretty much right where you'd want it.
Last example, you admit a baby that's 3.9 kilos,
a 41 week, a 3.9 kilo baby.
3.9 times three is 11.7.
In this case, because it's a term baby,
you decide to round down
and you run it at 11 MLs an hour.
11 MLs an hour would give you
just over 60 MLs per kilo per day.
Very, very easy, but really super helpful
and just a good way to just get fluids running
until all the calculations are done.
The second calculation is really helpful
when you just quickly want to estimate
whether a baby is getting a good amount of feeds,
whether you're on rounds
or whether you've just inherited the baby from another nurse
or if parents come up to you and they're like,
oh, my baby's eating 20 MLs every three hours.
What would be considered full feeds for my baby?
And you just want to come up with a number really quickly
without getting out your phone or calculator or whatever.
Let's assume for this that the babies are eating
their full feeds are 160 MLs per kilo per day,
which is kind of the upper end
of what we're aiming for in most babies.
And then also let's assume
that the babies are feeding Q3 hours.
So they're feeding every three hours.
So basically a baby is getting eight feedings in a day.
Because 160, which is the MLs per kilo per day
divides by eight really nicely, it equals 20.
It's a very easy way to calculate
what amount the baby should be feeding every three hours.
And basically the answer is going to be the weight times 20.
Again, let's go over a couple of examples.
So for example, if a baby is 2.3 kilos,
then multiply 2.3 by 20, then you get 46 MLs.
So for a 2.3 kilo baby to be on full feeds
at 160 MLs per kilo per day,
they need to be eating 46 MLs every three hours.
And I know this is silly, but I'm going to say it anyway.
The way I do it is I do 2.3 times two, so it's 4.6,
and then I move the decimal place, so it's 46.
The second example is, is if a baby is 1.4 kilos,
then what would be considered full feeds
for a 1.4 kilo baby?
So again, 1.4 times 20, so 1.4 times two is 2.8,
and then times 10 is 28.
So for a 1.4 kilo baby, 28 MLs Q3 hours
would be considered a full maximum feed.
Sometimes if I know that I'm probably
only gonna be pushing towards 150
or even 140 MLs per kilo per day,
then I'll just take off a couple of MLs,
especially when parents are asking me,
what are we really aiming for here?
Okay, I hope that those equations are as helpful for you
as they are for me.
Again, remember to like and to subscribe
if you haven't already,
and let us know what you'd like to hear about next.
We are still firmly in the fluid and electrolyte series.
Thank you.