Why Utah is Digging Up a $2.4BN Mega-Temple

Built World Academy
1 follower
Mar 22, 2026
This is the largest Mormon temple in the world.
You might recognise it from a few notorious reality shows.
Don't drink, don't swear, treat your body like a temple.
It is so hard to be a good Mormon.
That's right. This is the Church of Jesus Christ of Latter-day Saints.
It's being dug up. Well, its foundations are. All in a bid to stop it from falling over.
And this retrofit project is going to cost an estimated $2 billion.
But more than that, the temple exemplifies the hidden architecture of one of America's
strangest and most fascinating cities.
The plan to keep it standing is a remarkable U-turn from a city
that's normally shrugged off its historic buildings.
This is the $2 billion operation to save the world's largest Mormon church.
And the secret history that allowed it to exist in the first place.
Now, the first thing you should know about the Salt Lake City Temple
is that it's very old and very big.
It utterly dominates the Salt Lake City skyline, and that's no accident.
The temple took more than 40 years to construct and was completed over 130 years ago.
It was built from granite and quartz monsonite mined from Little Cottonwood Canyon.
It features walls up to 9 feet thick, contains 170 rooms and sits on an 11.4 acre site.
It is a hefty building.
But while it was built for many things, including weddings and ordinances,
it was not built to withstand earthquakes. And that's actually a very big problem.
The Wasatch Fault runs along Salt Lake Valley and geologists estimate that a major earthquake
of around magnitude 7 happens once in a millennia.
That may sound like a lot of time, but the reality is that there's a 57%
probability of at least one earthquake of magnitude 6 or greater in the next 50 years.
To give you an idea of how devastating that could be, it would be around the same size
as the 1994 LA earthquake that forever changed building codes in the US.
Or the 2003 Iran earthquake that killed 26,000 people.
Aside from massive quakes, there are still plenty of larger ones, magnitude 4 and above,
that happen around four to five times a year within 300 kilometres of Salt Lake City.
A magnitude 6 quake would be likely to cause significant damage to the temple and could result
in a multi-month or even longer recovery effort along with some serious stabilisation.
And when it comes to trying to imagine what something like that could look like,
we don't actually have to look very far. We just need to head to New Zealand,
where on the 22nd of February 2011, the city of Christchurch was struck by a magnitude 6.3 quake.
The iconic Christchurch Cathedral was structurally damaged.
Its spire and upper tower collapsed, while the rest of the building was marked as unsafe.
Because of extensive structural risks, authorities decided the cathedral needed
deconstruction and either partial or full demolition. Heritage groups pushed back
against demolition, arguing the cathedral could be saved rather than torn down.
The church was then rebuilt and seismically strengthened.
In many ways, the Church of Latter-day Saints is trying to do exactly the same thing
before disaster strikes.
Now, keeping up to date with massive construction sites like this one in Salt Lake City
is no mean feat. There are countless projects, megaprojects and gigaprojects to keep on top of,
and not all of them are straightforward or uncontroversial, which is why I use
Straight Arrow News. Straight Arrow News shows me all the sides of any current issue.
Typical news algorithms are designed to kind of stir up anger and clicks,
and can stop us from learning the full story. Depending on where you find them,
two articles can approach the exact same issue, but show it completely differently.
Articles from outlets on opposite sides of the political divide often report things very
differently, and most of us only served one side of the story.
Straight Arrow News cuts through the clutter, delivering stories from across the political
spectrum and allowing you to see things without the filters, bias or spin. That way you can stay
informed without the noise. One of the features I love is the history lesson that accompanies
most articles. It gives you much deeper context and background and helps you understand the wider,
bigger picture on an issue. I definitely needed a history lesson with this one. It would have
been impossible for me to get across how important this temple is or really tell the story of Salt
Lake Temple without understanding the history of Salt Lake City itself, which is something we're
going to come on to in just a moment. So if like me, you want to stay informed without the noise,
then download the Straight Arrow News app today. It massively helps us when you guys take the time
to go and check out our video sponsors, and this one is definitely worth looking at.
Now, let's get back to the Church of Latter-day Saints.
To make it safer in a large earthquake, they're decoupling the structure from any ground motion
in a process known as base isolation. It allows the building to move independently,
or semi-independently, from the ground below, reducing the forces that the building itself
feels during an earthquake. The system is designed to allow up to 1.5 metres of
horizontal movement in any direction during strong seismic activity. That would protect
the building's ornate stonework and masonry, as well as its historic interior and any people
that happen to be inside. Here's how they're actually building that system. First, they
excavated around the temple's original foundations down to about 10.6 metres to create a new lower
level where the isolators could sit. To support the structure while they dig, they used underpinning
techniques. Micropiles, secant piles, tieback anchors, tensioned tie rods, hand-constructed
underpinning piers, plus consolidation grouting. This underpinning was critical so that when they
removed the original building's footings, the heavy stone walls didn't shift or settle
dangerously. Once the excavation was done, they built a new concrete foundation specifically
designed to handle quakes. It includes transfer beams and girders made from reinforced concrete
that go around the temple's perimeter, as well as internally to distribute the immense weight
of the church. They ran loads and loads of post-tensioned cables through the foundation,
more than 423 kilometres worth. These cables physically tie the temple structure into the
foundation in a way that helps to control how load transfers, especially during motion.
The old stone footings and the temple's existing weight will bear down through this new system.
The old footings on top, transfer beams, isolators underneath, then the new footings. All in all,
they're installing 98 base isolators under the temple. Each isolator is immense, weighing 8,000
kilos. The isolators are essentially bearings between the new concrete footings and the
transfer structure. During a quake, they can slide and move so the temple doesn't take the brunt of
the quake's energy. Try and think of it like a raft made of concrete-filled steel pipes bored
underneath the building structure. Once the full weight is transferred to the isolators,
they'll back-excavate the soil directly underneath. This is so in a quake the structure can float on
them rather than being constrained by the soil beneath them. The isolator bearing system is
vertically stiff, meaning it resists vertical loads like wind, but it's also horizontally
flexible, which is exactly what you want in base isolation. Retrofitting a 19th century stone
building is much harder than building a new one. Teams have to be extremely careful not to damage
the stonework or any part of the building. Because of the complexity, the project is
extremely time-consuming. The church had hoped to be done by 2025, but things have pushed into 2026.
It's because they're not just installing isolators. They're also reinforcing walls,
spires and other architectural elements because isolation alone doesn't guarantee
zero damage in the worst-case scenario. The renovation includes more space for ritual
baptisms and increased seating in instruction rooms. They're also building a north addition
with a ceiling wing, which is where Mormons get married. All in all, it's a major upgrade to a
church which in itself took over 40 years to construct. You have to remember that this isn't
really just a church. The building is a declaration. In its time, it was radical.
Led by the future first governor of Utah, Brigham Young, 148 Mormons came to Salt Lake City in 1847.
Their goal was to establish a secluded town safe from persecution. At this time,
Mormonism was a fairly new and controversial religion, facing intense criticism and backlash
from Christians. In fact, the founder of the church, Joseph Smith, had been murdered just a
few years prior. When they arrived in Utah, they found a harsh, isolated landscape. But despite
that, Young set about creating his city. He knew the importance of a symbol and so anchored his
plans around what would become an enormous temple. There were no railways, no quarries,
no infrastructure. Work formally began on the temple in 1853. Crews excavated footings and
laid early foundations using sandstone. But then, almost immediately, the project faced its first
major obstacle. By the late 1850s, the region was on the brink of conflict. With US troops
marching toward Utah, workers buried the foundation to prevent it from being destroyed.
And construction work came to a halt. It would take years before the site was ready to build
again. And when it was, the decision was made to build it out of granite. The only problem was
that the nearest usable granite was 32 kilometres away in Little Cottonwood Canyon and it wasn't
exactly easy to move. With no heavy machinery, workers blasted blocks of granite loose,
hand-shaped them and then loaded them onto a wagon. Ox teams hauled the stones across rough,
unfinished terrain. Just a single trip could take up to four days.
Every block had to be shaped with extraordinary precision.
It was slow, painstaking work and the scale of it was absolutely enormous.
In some places, the walls were three metres thick.
The design by architect Truman O. Angel combined Gothic and Romanesque elements,
but everything had a symbolic value. There were stars, suns, the Big Dipper and the now famous
statue of the angel Moroni. This wasn't only decorative flourish, it was storytelling,
reminiscent of Renaissance churches or even Gaudi's Sagrada Familia today.
He was using architecture to illustrate God.
Through the 1870s and 1880s, the towers climbed higher.
Steam-powered tools eventually arrived on site but the work was still intensely manual.
Craftsmen shaped stone by hand, timber was cut locally, metalwork was forged in small workshops
and all the while, the settlement around the temple grew from remote outposts into a city.
The temple really did become the anchor point of Salt Lake City's urban plan. Streets,
public squares and civic institutions aligned themselves around the temple block.
You see, Salt Lake City isn't just another American grid,
it's one of the most deliberately planned urban layouts in the world.
Brigham Young carried out the Platte of Zion. Essentially a plan for a city that was drafted
years earlier, it outlined an ideal urban settlement, a perfect grid of square blocks
and wide streets. While other frontier towns evolved messily, Salt Lake City was engineered.
Within days of arriving, surveyors were marking out the first streets, laying down a grid aligned
almost perfectly with the cardinal directions of north, south, east and west. At the centre,
an 11-acre block was reserved for the community's most important building, the Salt Lake Temple.
This is a typical New York City block, about 80 by 200 metres. It was a fairly standard layout
for cities of this time. Now let's compare it to Salt Lake City's grid. Their blocks were 200
by 200 metres, the largest of any American city by far. The streets were incredibly wide too,
New York's were about 18 metres, 30 at the most. Conversely, every street in Salt Lake City was
more than 40 metres wide, enough space for a team of oxen to turn around without stopping traffic.
While this scale was strange for the time, it allowed the city to have a number of quirks,
quirks that turned out to actually be quite valuable. Every block measured 10 acres,
each divided into just eight enormous lots. They were effectively micro-farms. It allowed Salt Lake
City to function as a hybrid between rural and urban life. Families grew crops on their lots,
the streets acted like irrigation channels during droughts and the huge block's size reflected a
self-sustaining community model. They also had other benefits, acting as firebreaks that
protected against catastrophic blazes as well as providing straight, unobstructed utility corridors.
In the long run, those large blocks posed challenges for walkability and downtown density,
but they allowed the city to adapt very easily to the invention of the car.
Over the 20th century, Salt Lake City expanded far beyond the original grid.
But the city's basic DNA of wide streets, generous rights of way and steady block organisation
enabled major infrastructure projects from interstate highways to tracks like rail.
Salt Lake City has struggled to preserve many of its historic buildings thanks in part to its
success. Skyrocketing land values and pressure from developers has meant the destruction of
many heritage buildings. Spending more than $2 billion to save one of the city's oldest and
most iconic buildings will go a long way to showing the rest of this urban area why preservation work
is so important. The genuine hope is that this project can go on to create a ripple effect.
Works are due to complete in 2026, with the doors to the temple reopening in 2027.
Thanks to these engineers, this building is going to go from being in danger of collapsing
in an earthquake to becoming one of the most seismically resilient historic structures
in the world. Something that we think is well worth the effort.
Huge thanks to Straight Arrow News for sponsoring today's video. Don't forget guys,
you can improve the way you get your news for the better by downloading the Straight Arrow News app
at the link below. And as always guys, if you enjoyed this video and you want to get more
from the definitive video channel for construction, make sure you're subscribed to The B1M.
