Trash to Treasure: 10 Stunning Thrift Store Wood Decor Upcycles

Thrifty Thinkers
9 followers
AI Generated·May contain errors
Thrift stores are full of wood decor pieces, but they're often overlooked or left behind
because they're outdated, damaged, or just plain ugly. So in today's video, I'm giving
10 of these forgotten wood finds a second chance. I'll share lots of ideas for transforming these
boring pieces into stylish decor for your home. So if you like budget-friendly DIYs
and spotting hidden potential, let's get started. Let's start with a wood recipe box, an item that
I often see on thrift store shelves. This one had an embossed design on the cover that I sanded off
with my orbital sander. I didn't care for the light wood stain, so I gave it two coats of a
pale green chalk paint. I like a distressed, aged appearance, so when the paint was dry,
I sanded over the edges and corners. I wanted to add a vintage seed packet label to the top of the
box, but I couldn't find one that fit the horizontal space nicely. So I used a botanical
book illustration instead. To decoupage paper to wood, brush a light even coat of Mod Podge
to both the wood and the back of the paper. Smooth the paper in place and roll over it with a brayer
to assure good adhesion. Once the Mod Podge was dry, I distressed the edges of the paper with
sandpaper and then brushed on a top coat of Mod Podge to seal and protect the paper.
Because I want to use this box to store seed packets rather than recipe cards, I used my
Cricut machine to cut the word SEEDS from a piece of vinyl. To create a stencil, I removed the letters
rather than the background from the vinyl and placed the remaining piece of vinyl on the front
of the box. Then I used a small sponge dauber to apply green chalk paint to the stencil.
I let it dry and then carefully removed the vinyl stencil. Again, to create an aged appearance,
I lightly distressed over the lettering. And then to seal the chalk paint, I applied clear
wax to all sides of the box. I also frequently see wood clocks at thrift stores, usually newer,
cheaply made ones like this clock. To give it a more substantial appearance, I'm going to attach
it to this strange looking wood box. First, I want to remove the clock face and the handle
so I can paint over some of the cheap wood with black chalk paint. I decided to paint the sides
and bottom but leave the top natural on the clock and do something similar to the box as well.
I thought the combination of painted and stained wood would look nice. The plexiglass was glued
in place so I just used a razor blade to scrape off any paint. Once the paint was dry, I sanded
over the edges. But you can certainly skip this step if you don't like the distressed aged look.
Finally, I applied clear wax to seal the chalk paint. Then I was ready to join the two pieces
together. I just centered the clock on top of the box and added a few brad nails through the inside
bottom of the clock. The clock face was bright white and pretty generic looking and I wanted
something more interesting. So I carefully removed the clock hands and the nut below the hands to
remove the clock mechanism. Then I printed out a vintage looking world map on a piece of cardstock
in a size to fit over the clock face. The current clock face was firmly adhered so I just used
spray adhesive to attach the map over it. Then I used an exacto knife to cut out the center hole
and reassembled all the clock parts. Although there are no numbers on this clock face,
the black clock hands are pretty easy to read. I popped the clock face back into the cabinet
and reattached the small screws that held it in place.
Finally, I reattached the top handle which, in retrospect, I didn't need to have removed.
Small wood shelves like this are a dime a dozen at thrift stores. I didn't get it on film but I
used a screwdriver to easily pop off the little bracket under the shelf. Then I mixed up some dark
green and blue paint to create a dark teal color in an attempt to match the paint on this vintage
finial that I had previously thrifted. I painted both sides of the shelf and while the paint dried,
I removed the finial from its wood base. Then I used wood glue to attach the finial base to the
underside of the shelf. I needed to split the finial in half before reattaching it so that
the shelf would hang flat against a wall. There were numerous nails holding that finial together
but using the claw on a hammer I was able to pull it apart. Then I used wood glue to attach
half of it back in place. I let the glue dry overnight. The next day I added a couple of
nails to further secure the shelf to the finial base. I distressed the shelf to help it better
coordinate with the rustic piece and then sealed it with clear wax. The underside of the shelf had
an indentation where the original wood bracket had been but I felt it was too big to fill with
wood putty so instead I decided to cover the bottom of the shelf with a piece of leftover
peel and stick wallpaper which I think will be an unexpected surprise. I cut a small piece of
wallpaper, peeled off the backing and pressed it into place. Then I used an exacto knife and
sandpaper along the edges to remove all the extra paper. Because the piece of salvage was in such
poor condition I decided I better fill in some of the gaps on the back with caulk for extra
durability. These wood candlesticks are unusual in both shape and color. The best part really was
the wood on the bottom and top of each candle stand so to freshen up those wood pieces I
lightly sanded them with a sanding block to get down to the natural wood. Next I painted over the
orange and blue center pieces with a pale green chalk paint. I have a vintage Courier & Ives
calendar print of sheep in a meadow that I wanted to use but it was not as tall as the candlesticks
so I took a picture of it and enlarged it so that it was tall enough to cover the painted section
of the candle stands. To save printer ink I only printed out two sections from the enlarged image.
To decoupage paper to wood remember to apply Mod Podge both to the wood and to the back of the
paper covering both areas completely. Smooth the paper in place and use a brayer if you have one
to assure good adhesion. Let the Mod Podge dry and then use a utility knife to cut off
the extra paper. Then go over the edges with sandpaper to create a natural looking edge.
Finally seal the paper and the edges with a top coat of Mod Podge.
This small storage box once held someone's collection of wine corks but with its two
plexiglass sides it was a great find for under two dollars. First we need to get rid of the writing
on the sides and bottom. I sanded over them a bit and then gave the box two coats of black chalk
paint. When the second coat of paint was dry I lightly distressed the edges with a sanding block
and then sealed the chalk paint with a coat of clear wax dabbing away the excess with a rag.
To create something unique to put inside the box I grabbed an old doorknob from my stash
and using it as a small vase I stuck a few stems of dried flowers in the hole cutting them down
so they wouldn't be too tall for the box. I turned the box upside down slid open the lid and put the
doorknob inside so that it covered the hole in the lid. I love repurposing these wood picture frames
covered with words and phrases. I'm going to completely cover the front of this frame with
a piece of old wallpaper so I only needed to paint the frame edges with ivory chalk paint
to better coordinate with the wallpaper. The wallpaper's repeating pattern is large enough
that nothing will actually be repeated on the frame so it won't be obvious that this is wallpaper.
I don't think that this wallpaper is pre-pasted so the easiest way to adhere it to the frame
is with spray adhesive. If you've never used spray adhesive it's really sticky so once you place the
wallpaper down there is no adjusting it. Smooth it out and use a brayer to remove any air bubbles or
wrinkles. Just like I did on the small shelf I first cut off the extra paper and then use sandpaper
to smooth over the edges. I'm going to cover the middle of the frame with a mirror but I removed
the wallpaper from the center opening anyway just to avoid future air bubbles. I'm just going to use
a Dollar Tree mirror that I have on hand. It's really plain but it's very lightweight which is
an advantage. Painting the mirror frame with chalk paint will help disguise the fact that it's made
from plastic. Once the paint was dry I used Gorilla Glue Clear Gel on the back of the frame
to attach it to the larger picture frame. For an extra little touch I cut a bird from the remaining
wallpaper and matched it up with that same bird on the frame and I cut out the portion of the bird
that was hidden under the mirror. Then I glued that piece on the mirror frame so that you can now see
the entire bird. I used Mod Podge to do this but I think wallpaper paste would have worked better
because it really did not want to stick to that frame. Once the Mod Podge was dry I applied some
clear wax over the painted frame. In my opinion this wood bread box was overpriced at $14.99
but I did think it could be cute with a few small changes. I'm not going to paint the entire piece
I'm just going to paint the door to add a pop of color and break up all that brown wood and I'm
going to use a bold green color. At first I planned to paint the wood handle but then I decided I
wanted to replace it with something smaller. Once the chalk paint was dry I cut out a large
rub-on transfer of two chickens from IOD's Brocante Packet. Since this was a clean smooth surface
it adhered quickly and easily using the plastic tool that comes with the transfers. The transfer
looked a little too new and perfect next to the older wood so I distressed it with sandpaper
especially on the edges and corners. Then I used some watered down antiquing wax to
give it an even more aged appearance and then I replaced the chunky wood handle with a skinnier
metal one so that the chicken images could still be seen. I think I said earlier that these little
wood shelves are a dime a dozen and I came across another one and this one was only 99 cents
so I had to get it. First I painted it with a neutral colored greige chalk paint and while
the paint was drying I pulled out an IOD mold of Persephone. I dusted it with a little cornstarch
which keeps the clay from sticking to the mold. This is the biggest mold I've ever used and I
didn't initially pull off enough air dry clay. I had to add several additional pieces which was
not ideal. There were some creases or wrinkles in the clay that probably could have been avoided
if I'd started with a bigger lump of clay. After removing any excess clay and assuring that the
clay was reasonably level, I dumped out the mold on an old cutting board to let it dry. I had a
little bit of clay left that I didn't want to waste so I rolled it into three small bird egg
shapes, an idea I got from Julie of Julie's Designs and Signs. After letting the clay dry
overnight I was ready to attach it to the small shelf but I'm not going to use it as a shelf.
I'm going to use it as a stand so I removed the d-rings from the back. To attach the clay to the
wood I applied a good amount of wood glue to the back of the face then I situated it on the bottom
portion of the shelf making sure that the top point was concealed. I let the glue dry overnight
which also allowed the clay to dry out some more. The next day I brushed white wax over the face and
over the wood and then dabbed off the excess with a rag. I repeated this process this time using
watered down antiquing wax and then to blend out the two waxes and give it a more natural appearance
I lightly dipped a clean paintbrush in clear wax and then dabbed over the face like you might do
to blend your makeup. I think Persephone's head slid down a little while the glue was drying
so I used a cutting blade on my angle grinder to carefully slice off that tip of wood.
A solid wood lamp is always a good find and if the weather was warmer I might have stripped off
the varnish and sanded it down to the bare wood but since it's winter in Illinois I'm going to
paint it with ivory chalk paint. After the first coat I realized that the crack down the side of
the lamp was much more obvious than I first realized so I filled it with some wood fill and
let it dry for a few hours then I sanded it smooth and applied a second coat of paint.
I wanted some of the wood to show through so like I did in several of my previous projects
I distressed it with a sanding block. I wanted to cover most of the lamp with a rub-on transfer
and decided to use a large William Morris design that I had previously ordered from Etsy.
I cut it in half and then wrapped one of the pieces around the lamp. Due to the irregular
shape of the lamp I knew it was not going to adhere perfectly so I tried to make sure that
at least the front of the lamp lined up nicely. Applying transfers to curved surfaces is challenging.
One thing I found helpful was to cut away the backing paper as I went along just to get it out
of the way. Once the design was completely adhered I could see that there were a number of wrinkles
in the transfer but this is easily remedied with sandpaper so I lightly sanded over the entire lamp
which removed the wrinkles and distressed the image. The lampshade I want to use is ivory
not white so I brushed watered down antiquing wax on the lamp so it would better match the color
of the shade. I noticed while working on the lamp that the harp and socket were wobbly so
to tighten everything up I found the nut on the bottom of the lamp and tightened it. I still had
half of the William Morris transfer left and I wanted to add some of it to the lampshade.
I cut the remaining piece in half and applied the top half to the bottom edge of the shade.
I made sure I placed it on the front of the shade that is the side opposite the seam. Then I cut a
bird from the unused piece of transfer and added it above the floral design. Rub-on transfers
actually adhere very nicely to most fabrics. For a finishing touch I decided to add some
lacy trim along the shade's bottom edge just attaching it with hot glue.
I thought this wood wall clock was an interesting design with the glass on the outside front.
I wasn't sure what I was going to do with it but I knew I wanted to paint it so I first
removed the clock which was held in place with four small screws. Then I wanted to remove the
glass which was held in place by four short dowel rods. When I tried to tap the dowel rods through
the holes I ended up breaking the glass and that's when I decided I would not be replacing the glass
but I did replace the dowel rods. I painted the wood frame with the same bold green paint I had
used on the bread box. Once the paint was dry I brushed on clear wax to seal and protect the
paint. The hole in the frame was rather large so I found an old IKEA poster in my stash
that was large enough to fill the opening. I cut it down to fit perfectly in the back opening
and just attached it with hot glue in the four corners. The poster has some kind of shiny surface
so it should be fine without the glass. I wanted to make use of the dowel rods that stuck out from
the frame so I decided to wrap some faux vines around them creating a circle of vines. Then I
hunted through my crafting supplies and found a few faux butterflies with wires attached. I just
twisted the wire around the vine to attach each butterfly. When I went to add a little hot glue
to hold the vine to the dowel rods a big blob of hot glue dropped on the poster and of course when
I tried to get it off it tore a piece of the image. So I ripped it out and then heated up the hot glue
with my heat gun so that I could scrape out the hot glue that had been holding the poster in place
and then I cut up another IKEA poster to fit inside instead. This time I was very careful
with the glue gun because this was my last IKEA poster. Thank you so much for watching today
and here's another video I think you may enjoy where I share unexpected ideas for upcycling and
repurposing thrift store clocks.
