Spiritus Systems: LV-120 Plate Carrier

Ballistic Lab
1 follower
1 Video View·Mar 19, 2026
Please ignore my complaints about plate bag size or watch to the end to see my recant.
AI Generated·May contain errors
All right guys, today we're taking a look at the LV120 from Spiritus Systems. I don't have plates
in here to start off with. I'll get to that in a little bit when we get it on the table,
but this thing is the most complicated plate carrier that I've ever seen. Not necessarily
hard to use from a user perspective. I think it's actually pretty easy to assemble,
but it seems like it would be a nightmare to put together from a factory setting. There's a lot
going on in here, and supposedly a lot of future-proofing. I think that's yet to be seen.
I don't doubt that it's true. I just haven't seen enough talk of future accessories or anything
to make it make complete sense to me, but we'll kind of walk through those as I found them
on the table. That said, I think it fits together really well, and I've heard exceptional things
about how well it carries load. It's using the new to Spiritus back panel mounting system.
I'm a little torn on that. I think it's nice that we're going to have a common
mounting system. However, I don't think it's going to be a common mounting system, and we'll get to
that a little bit when we get to the table. My experience with Spiritus back panels in the past
has been that they're exceptional. I don't know that that's going to change with the new mounting
system to match Ferro. I also really like the Ferro back panels, so I can see why they did
what they did. However, Cry is going to be kind of left on the sideline, and I think Cry is going
to be perfectly content with that because Cry is Cry, and they're not going to be hurting for
business. But let's get this thing on the table, try to take a look at it. I'll show you the plates
at the end, but I need them out for now to run through all the features so you guys don't see
me struggling to get the plates out. All right, so as we go through this thing, again, this was a
viewer submission, so I'm trying not to muck it up too much with sizing and whatnot. All right, so
I want to give Spiritus credit where credit is due. The support materials on their website
for this seem exceptional. I used their operator manual to put it together because it's not the
most intuitive thing, and while I do think there's a panel missing Spiritus, it was pretty
straightforward to figure out. All right, they also have a pretty good amount of marketing material.
Spiritus has been crushing it with their YouTube stuff and everything, and if you have any
questions after reading the operator's manual, or you have any questions about how this thing is supposed
to work, any of those things, check them out. They're going to be able to explain it way better
than I am, so I think what we're going to do the most is just kind of nerd out on the construction
of this thing because, like I said in the intro, it is wildly complicated, and I hope for good reason,
but we'll find out soon, hopefully. All right, so starting with the front plate bag, I have the plates
out because this is one of the most oddly snug plate carriers that I have ever put plates into.
They pretty much fit, and we'll get to that probably right at the end, but just based on
the way this thing is put together with the stretch panel kind of just in the middle here,
and not any other stretch in here aside from like a little bit that you get from the mesh,
it's really, really strange when you put plates in here the way it just like hugs the plates
and holds them very tight. I feel like the flap is still a little short for medium e-sappies and
backers, especially since from the website it appeared to be the case that that's what they
were kind of built for, maybe not with backers and some of the new gen e-sappies, so the plate
in my opinion is still a little bit undersized, but it is really tight, and I don't think that's
a flaw at all. I think it holds the plates exceptionally well based on the way they
built this, but you can already see super complicated design on here, and I am glad
that I don't have to sew these. All right, so looking at the front plate bag, a little button
down here. I don't know what that's for. I would assume that that is something coming later. I
couldn't find it on the website or any reference to it, and I have watched a good bit of the
Spiritus materials on this thing because I was pretty interested in it all along. Didn't see
that button come up anywhere, so we'll see what happens there. All right, moving up. Spiritus has
a new new-to-them placard mounting option, which is kind of like the CryFingers. I don't know if
it matches the CryFingers. I have all my Cry placards tucked away pretty well right now,
and I apologize for that. It looks pretty close. I think you could get away with it.
Hopefully Spiritus can answer that question. I would love if it is. I would not be surprised
if it's not Cry-compatible, but it uses a very similar method with Velcro fingers tucking through
these loops and then Velcroing down here to maintain it. I don't know that I was originally
a fan of that method. A little bit of time with it. I dig it. I think it works really well. It's
really clean. On these plate bags, though, with how snug the plates are held and kind of the chore
of getting the plates out and then trying to really cinch this flap to get them to fit,
I don't know if I'd be a fan on this one. That said, maybe you have different experiences with
plate fitment. All right, moving up. You've got a little tab here for any other placard mounting
options that you want to use. If you want side release buckles hanging off of there or G-hooks,
that'll work for that. And if you don't need that, it is nicely tucked underneath this
kind of flap here and completely out of your way. All right, then you've got a bib,
pretty standard size bib up here, two rows, four columns wide, and some holes for any kind of
shock cord origami that you want to do to mount push-to-tucks and what have you. All right,
you can also clip a push-to-tuck on top of your buckle there if that's something that you want to
do. And you've got the edges of the plate bag here for cable routing and whatever else, as well
as these holes, you can run cables out of there. And then cable pass-throughs along the sides of
the plate bag there. There's a lot of different options for cables just based on the way this
thing is built. I don't know how many are intentional and how many are just kind of
other holes with a purpose. All right, looking at the tube attachment here, this is where I start
getting a little confused on what the future holds for this thing. So if you look at some of
the marketing materials and whatnot, these male tubes are repair tubes so that you can pop them
on if your placard has tubes, you don't need them. But where I get lost is there's a kind of channel
behind them. This stitch line is a little misleading, the channel doesn't really follow
that stitch line. It's just kind of here and as far as I can tell that goes all the way through.
Yep, fingers touch there. Which leads me to believe it is kind of built to be like SPC-style
cummerbund compatible. I don't know what else that pass-through would be for. However,
the cummerbund attachment in the back is fairly specific to this cummerbund. So while I think
you could get an SPC cummerbund in here just fine, I don't know that that was the intent. I also don't
know that it wasn't the intent. I think it would work and the other reason why I'm kind of confused
on that, I'm sorry I'm jumping around here a little bit, is this only comes as a complete system
unlike the way Spiritus used to do things in the past. So while I think that cummerbund is really
cool and super neat, plate bags lead me to believe that it was built to be compatible with other
things. In which case this is probably a considerable chunk of the total cost sunk
into that cummerbund that you would potentially be replacing. All right, that is the front plate bag.
These shoulder straps are done in a way I have never seen done before and I'll do my best to
explain it. The operator's manual has a cutaway of the front plate bag so that one side of the
plate bag is not in the way and it makes a little bit more sense. But what happens is,
if I can get this undone now,
you have this kind of tuck tab system going on with your shoulder strap. So luckily for me,
the gentleman that owns this has a tube shoulder strap which is an aftermarket piece,
but he sent the extra shoulder strap which makes it way easier to kind of explain what's going on
here. If you look in here you can see where it's all attached in there and there is a thermoplastic
piece sewn into the corner of the plate bag that this thing attaches to. And basically what goes on
is you route your shoulder strap into that pass through. It's going to go around the thermoplastic
there. Oh, there we go. Okay, double fold. All right, so it's going to go around that thermoplastic
and then your thermoplastic will be in there and then this other tuck tab gets tucked into the
bottom of the shoulder strap there. So it creates a pretty legit loop in there that's not going to
work itself free. This, if I'm understanding what's going on in the plate bag correctly,
kind of trying to work through the shadows and everything, that's going to engage with a slot
in the plate bag and then that gives you kind of an articulating shoulder strap in there. You can
see it moves a little bit. I don't know that all of that was really necessary. I think the Scarab
does articulating shoulder straps pretty well. However, it might make sense for making that
adjustable, right? So whoever owns this figured it out working through the the plate pocket there
that you can see kind of down in there. That little tab sticking out down there kind of maybe
engaged in something. Sorry, I didn't mean to move that on you guys. All right, so looking in there,
you'll see the X-Pack. I didn't know there were potentially any issues with X-Pack. I thought it
was really cool. I think there's a valid case being made on both sides for wanting X-Pack,
not wanting X-Pack. I've seen some heated discussions on X-Pack. I think it looks cool.
It's inside the plate bag. You're not going to know. You can't see it. So maybe not sticking
to rule number one quite as well as you could there. Yeah, I don't know. It's there. If X-Pack's
not your jam, just know that this comes with X-Pack. Looking at the shoulder straps here,
I thought it was kind of funny that of all the complicated things involved in this thing,
the operator manual also tells you how to install the shoulder sleeves there, which is not super
necessary. But the way that attaches, I dig that there's no drama going on here. So it's just
Velcro overlap and then pretty low profile shoulder straps there. Or shoulder sleeves,
whatever. Whatever you want to call them. Strap sleeves. You got some slots in the shoulder
strap going up for if you need to tie anything down, maybe just to look cool. I'm not sure,
but they're there and available for you. Okay, looking at the rear plate bag now.
The shoulder straps going into the rear are also kind of articulated just by nature of the way
that they're sewn in there. They're not on a true pivot point from what I could tell in there.
However, they move kind of as much as you need them to and they're fixed. So no surprises there.
They ought to be fixed. Just makes sense. All right, looking at the rear plate bag,
you got full MOLLE PALS webbing this time around, which I appreciate. I think that was kind of one
of the downsides of the LV-118 is you kind of needed a zip-on panel if you wanted to mount
anything to the rear. This one gives you the option to start with fixed pouches if you're
not ready to invest in a back panel and then you can invest in a back panel later as you wanted.
All right, so looking at the zipper here and talking about UCAS, which is what they're calling
the kind of CRI, or I'm sorry, not CRI, the ferrospiritus common attachment system.
CRI will never be compatible with this because it needs what is essentially a rectangular plate
to function and that's just not what CRI does. They do the angled corners to more closely
replicate the shape of the plate. All right, so this zipper is going to be too long
to play with a CRI plate bag without being like flopping off the top as well as being
too long to play with the panels very well. Old ferro panels and ferro plate carriers
are like quasi-CRI compatible. They kind of work, kind of don't, but imagine that this is going to
be the same unless they've changed something that I'm unaware of, but this should just be
the ferro mounting system put on a spiritus plate carrier. All right, so that's kind of six in one
hand, half does the other. If you like ferro or spiritus back panels, great. If you like CRI
back panels, also great, but not going to work on here. If you like spiritus back panels and you
the 119, sorry to say your spiritus back panel is not going to work on here. That's the biggest
thing that I'm bummed about. Those are not cheap back panels and I think the only reason to make
this switch is because you wanted a ferro back panel on a spiritus rig. I think the spiritus
back panels are better than ferro, but ferro has more flexibility. So again, six in one hand,
half does the other. All right, moving on to things that actually matter. All right,
now when we open up this flap, you will see the greatest improvement of all of these improvements
over the 119, that your cummerbund mounting is visible and fairly straightforward. All right,
no more weaving through the grid blind. That was awful. All right, this is way, way easier to do
and you have a couple different ways to tweak the size of your cummerbund and I appreciate the way
that they did this. So gross adjustment is going to come from the cummerbund itself, which we'll
get to in a little bit. Fine adjustment is going to come from inside of the plate bag. So this is
one of the things that they have the directions for in the operator's manual. There is a panel
missing so they never tell you to route the shock cord through the cummerbund. If you look at the
pictures, it's pretty straightforward though. But basically, your cummerbund shock cord is going
to start folded over, split in half, running through these two holes. The holes are even
numbered in the operator's manual. It's wild what they did and I appreciate it. All right,
so it's going to come up through there, crisscross applesauce, and then up through
this kind of channel in your cummerbund. You have to disassemble the cummerbund,
which I imagine comes disassembled to do this, because you have to feed the legs of the
cummerbund out from the inside of the plate bag, which is not going to work with this on it.
So you run your shock cord through there, sink your shock cord into the plate bag,
bring it up out of the plate bag, slide on your cord keepers, name's escaping me right now,
and then knot this so that that doesn't somehow slide off. I don't have it knotted because I don't
know exactly where the gentleman that owns this had it sized to and I don't want to bother making
it harder for him to put back together. But the cord locks, cord lock, that's the name. All right,
there we go. You can tension that up or you can give yourself slack, which will let the cummerbund
slide further out. That is how you do kind of fine adjustment of the cummerbund once you've
got it kind of sized to your body. All right, how you go about sizing this to your body with plates
in, I don't really want to bore you guys with. It's not going to be super fun, but actually
attaching everything is pretty straightforward. Because what you're going to have to do is you're
going to have to put these forks in here, get your plates in, throw this thing on, figure out how much
slack you can take out of here, situate this, which is not something you're going to be able
to do while you're wearing it. So you may need to have a buddy kind of size where it was
so that it doesn't move on you. And then you're also probably going to want to start with these
basically touching in the plate bag to get the sizing dialed down so that you only have stretch
coming out of here as you need it. All right, hopefully that makes sense. If you get one and
put it together, it will. All right, now sizing the actual cummerbund is done over here, right?
So you're going to want to undo this pull the dot snap. It's not actually pull the dot. There's
no dot on there. It's just a snap, right? And then that is going to free up what I believe
they call the leg lock. That's this little plastic tab here. I have no idea if I routed this thing
correctly, but it works, right? There's a lot of like slots and grooves and tongues and French
cleats and I don't everything else in here. There's different options. Like there's this
is functional MOLLE as well. So like, I think I had it right just going through the plastic bits,
but I could be wrong on that. All right. So it's like, there's your cummerbund kind of frame.
And then here's your MOLLE portion, which is also reinforced. It's got thermoplastic running
through it. So by all accounts, it's a structured cummerbund. You're going to insert those legs
in there. And then what I did just for funsies was I sized it so that I would have
two slots free on the back. And then I put the leg lock in the third. So the way that
this leg lock goes in is you need to make sure it goes through both the leg and thermoplastic
in the cummerbund panel. Start on one side and just kind of work it all the way through there
so that you get down to this little notch. And then the other side, you just kind of hope that
thermoplastic goes where you want it to. So insert it in the slot kind of pre-folded
and push it down almost like you would like a paraclete tuck tab, right? You're just kind of
kind of hoping for the best there and eventually it'll go into place. That is going to lock this
panel onto the leg. So this will no longer slide. Now all the slack comes out from the plate pocket
as just like shock cord tension. All right, so once that's done, then you fold this flat back over,
snap your snap, and then tuck your little pull tab away just like that. All right, so there's
your cummerbund assembled. The reason I did this, not necessarily because it fit me,
but I kind of wanted to explore the idea of being able to put a MOLLE pouch on just the bare
legs there, which it should work. This is essentially a two-band cummerbund coming
out of here, so pouches should thread on there just fine. So if you wanted like a rear-mounted
MPU5 or something like that, kind of a heavier radio, it's right on the reinforced portion there
and it's coming out of these fairly narrow slots here just like the SPC had.
So it's not going to move around on you at all and it's going to be super stable. All right,
all of that hopefully is for not, because Spiritus put these little ribs on the sides
of the plate bag, which they say are for kind of fixed mounting of things. I don't know what
those things are yet. I don't know that I've seen anything mounted in any of their marketing
materials, but that's what that little rail is essentially for in the future. I don't know
how that's going to work because there's like nothing to it. It doesn't really have a lip or
anything. You couldn't slide something on there, so I don't know if it's going to get laced on
somehow. I don't know. I'm not judging it. I trust that they have a plan for it. It's just kind of
interesting and we'll see where that goes. All right, looking at the cummerbund panels here,
you got a little taper on it. I don't know. I would be perfectly content if it was just a
tube band cummerbund the whole way. However, your tube would fit a little bit funny on there,
so understandable that it's not, but it has fully functional PALS on the outer face and the inner
face. This one happens to be taken up by this gentleman's side plate pockets here. It's going
super stable coming around there. He's got the extensions on there for the soft armor as well,
but that attaches nicely. You don't have to use side plates. You use whatever MOLLE
pouches that you have at your disposal. All right, so that's that. You would then
close this up over your plate and then obviously it's going to close in the front with tubes.
All right, so I think that's as good a point as any to try putting some plates in here and
showing you kind of how oddly tight this is. All right, so I've gone back and forth. I haven't
figured out whether having the plate in there first or the backer first makes the most sense.
We'll try it together and see how this goes. All right, so getting it started is a little bit
tricky. Nothing crazy, but the further you go, and this is where I think where it's most odd to me,
is usually plate bags have very uniform tension. Once you get the plate in the pocket, it just
slides until it's not going to go anymore, and then you got to deal with it. This one,
the tension gets greater kind of as you go as those panels wrap tighter and tighter around
the plate bag. So that's in there about as far as I can get it, and I don't think I got it further
before. So we take our flap here with the cummerbund, taking up just like a little bit of that flap.
It gets fairly snug, and then you can do your best to kind of take some slack out of that.
You know what? I don't know what changed. That's better than I had it before,
so maybe my complaints about the flap are moot point, but I would like it, you know, just
half inch longer just to make sure that that's going to get all the way in there and really
marry up. A little bit of this is this awkward table that I have, and that's in there. I'm
going to take back everything I said about plate fitment as far as the flap goes. Ignore that.
We'll try the front plate back here just so you can see how that goes.
Maybe this was the one that gave me more problems, or maybe I'm just being a dumb.
So we got that started. Maybe it was the front. So you see, it'll go, I guess. I'm just struggling
with this thing needlessly, I guess. I think what it is, is I didn't try to get as much slack out
the inner panel before, but there is some inherent stretch there as well. You can see,
I don't know. I feel like that's not something you should really have to fight it all for,
but I'm going to take back what I said. I think it fits well enough, right?
So there you go. There's your plates installed in there. It is comfy. I've not loaded this up
enough to really say how well it goes. If I've got a little bit more time with this thing,
I might do a part two of this and just try to load this thing down and see how it goes.
But it is fascinating. I think it's wild, the construction that's involved in here.
All the different portions of the plate bags. There's so many bits and pieces that I don't
quite fully understand why they're bits and pieces. Why is this a separate piece? Why is
it not removable so that something else can go in there? I don't know. It's interesting.
I think it's really cool. I think for the work that goes into this and the potential
future uses, the structured cummerbund, I think it's pretty fairly priced. Folks will argue with
me that AVS is in a league of its own as far as load bearing goes. I don't know that that's
totally true. I think the SPC got 85% of the way there for me in my experience with those two
systems. I would imagine this will get you just as close, if not closer. I think everything locks
up really stable. The tubes are pretty rigid here. While it's not SPC style lock up, it's pretty
darn close, especially with the way the back and how rigid the back is. I think it's really well
done. I think Spiritus knocked this out of the park. I'm just curious to see where all the
future proofing and future ideas go. Hopefully that answered some questions. If not, check out
Spiritus' website. They've got a lot more information there that they have better
experience with than I do. Thanks for your time, guys. Appreciate it.
