How To Draw a Dragon Sketch Tutorial Step by Step

Art painting
22 followers
1 Video View·Mar 20, 2026
AI Generated·May contain errors
This is my sketch illustration of a realistic dragon and today I'm going to guide you through
each of the steps so that you could draw this yourself. So grab a pencil and paper and let's
get started. Welcome back everyone and thanks for joining me today. For this lesson I'll begin with
this 0.7 millimeter mechanical pencil with a 2D graphite stick. Now if you don't have a mechanical
pencil anything you have around the house will work just fine. Now the first thing we want to
do is establish the basic pose and composition of our drawing. So let's start on the bottom left
side of the page. I'm going to draw a straight angled line going across the center of the head
I'm just going to form the top half of the head so starting all the way down towards the bottom
let's bring the beak coming down let's go all the way up towards the top of the angled line.
Now the top of the head we're going to draw that straight angled line but we're going to go wider
as it comes up that gap in between that center line get wider up to right about there. Now let's
go back to the center draw a straight line we're going to open up the mouth all the way down towards
the bottom flatten this off come down towards the point of jaw. Now I'm just going to go wider
again going all the way up towards that center line towards the top. Let's go along the top of
the head we're going to go right about here draw the eye and go up and then down go back to the
left side draw the bottom of the eye coming down and then up. Now we're going to take this line
going to bump this up above the eye and then down. I'm going to blend this curve in towards
the spike towards the fin so you come down go up and hook that back let's taper this so it gets
wider and come around and then in to right about there. Let's go to the right corner of the eye
I'm going to draw another curve coming across and that's down and out and again it's taping this in
towards the side. Let's go to the top edge of the mouth draw one more turn this around and then down
towards the point and then just pull that back up. Now I'm going to create the fin in between each of
these three points so let's step down and add the fin coming around and then out and do that again.
In the corner of the mouth I'm just going to add that cartilage I'm just going to stretch that skin
coming around. Now I want to add some perspective to the inside of the mouth so we start from this
point draw the back side of the mouth coming across it's going to pull this in towards the
corner of the mouth and pull that all the way down towards the chin. Let's add a basic shape for the
tongue starting up here goes out down out and then back down to the tip and then we're going to tape
it so it gets wider as you come back in towards the throat. Now we're starting to see the formation
of the head so I'm going to go ahead and start adding some shape to the neck. Let's start from
the jaw I'm just going to curve this up and around the neck come down across the body and then down
towards the bottom of our page so just curving the body back in. Let's start back towards the brow
just going to go across and then curve the back of the neck going out towards the side of our page.
Now we're going to add another fin across the top of the head from here then it's up
out toward the tip and taper that back down let's add another one we go up and then out
and then back in. Let's add the fin in between. Now you have the basic rough sketch of the head
let's go back and clean this up by erasing some of these guidelines and we're going to come back
and start modifying the shapes. Once we clean up a drawing I'm going to go back in start modifying
the shapes. I'd like to start back with the eyes. Let's start by adding some folds across
little wrinkles coming down towards the corner of the eye. I'm just going to add some more shape
to the bottom. Add some wrinkles coming out from the eye and from the eye I'm just going to work
our way out adding some folds across work our way across the top of the brow and then from here
we're just going to work our way across the top of the head adding a little bit more curvature to
that straight line. I want to add a little horn across the front and another one going up I want
to bend that beak going across and bending that down toward that tip. So just using this rough
sketch as a guide we work our way around let's add a fold and pull this up and I'm just going
to blend this into the nostril or the bottom of the nose and lightly shade that in. Now around the nostril
I'm just going to add some skin and bend this around. Let's go back to the top edge of the mouth
and right here we're going to add some more wrinkles some folds going across
just to add some more shape bring this around and right here I'm just going to blend into this spine
again just want to add a little bit more shape so it's not so straight
going out towards the tip and right here we don't need to go all the way back in
so we come in and just fade that out. Now here we're just going to leave this alone
let's work our way across that second spine and we want to put a little bit more emphasis
across the top I'm just going to fade that in draw the lower jaw starting underneath the spine
and add a few wrinkles and bend coming down towards the jaw and just curl that back up
at that point of the chin. Now the chin we're going to go across towards the jaw
at a few points in the jaw line and then bend that back up and let's draw in some
shape across those top fins and right here along the bottom I'm just going to blend this
across the back now across this bend we're just going to fold some of that skin
down and out towards the belly. Now with the back side of the mouth I'm just going to blend
this in towards the teeth so I'm just going to add these little points bend it in also across
the back side of the mouth add those fangs across the top at the front edge of the mouth
you want to vary the size of the jaw. I'm just going to rough in some flames coming out from the
mouth and the top edge and the bottom. Now when you go back to the eye using my thicker pencil
this is my 0.9 millimeter I'm going to add some contrast so applying some thick and thin lines
to help get some weight to our drawing I'm just placing some of those heavier lines across the
center of each curve.
Now I'm going to use the flat edge of my two millimeter mechanical pencil and start adding
some shadows and tones. So I want to darken up that tongue so it's pushed into a silhouette
and then feed that as it comes in towards the throat so it's brighter inside the mouth
I want to silhouette the tongue. Now let's go to the beak. I'm going to darken that up
I'm just going to push the shadows along the bottom edge of each shape so the light's coming
down across our character. I'm just going to darken up the top edge of the mouth and then fade that out.
Also the cartilage and push the top a little bit more into shadow
I also want to darken up each of the spins across the tip and then fade that forward.
So
I'm going to go back to the base layer of shadows just add a core shadow so I'm just
going to leave a little gap so a bit of a highlight this will help get some more shape
to our drawing. I'm just lifting up that shadow across the bottom
I'm just going to add a little bit of texture inside that fin just pulling it from the outside
I'm just going to leave that fine detail inside
I'm just going to add some texture of scales inside. I'm going to start with the jaw
I'm going to just use the side edge of my two millimeter mechanical pencil
to add any spots. You can just layer some of that in across the top. You want to vary the size of
these spots. Add some larger ones and smaller ones as they come forward towards the highlights
As you get closer to the end I'm just going to add a little more detail and shading and
always be sure to sign our artwork and that's pretty much it. There's a sketch illustration
of a fire-breathing dragon. I hope you enjoyed today's lesson. If you did you might want to
out this video over here. I want to thank you for watching and I'll see you in the next one.
