ATF To Redefine Ghost Guns, Silencers, Receivers, & More: Are You Now A Felon?

Uniform & Arms
3 followers
1 Video View·Mar 19, 2026
The ATF is trying to redefine what a firearm is, what a receiver is, what a silencer is, when they have to be "registered", and many other "rules" that would make millions of Americans criminals over night.
AI Generated·May contain errors
Welcome back everybody. As you probably guessed from the title of the video, the ATF is up to
some nonsense again trying to strip rights from American citizens. So it's kind of a lot to digest
and my guess is they did that on purpose. They probably also dropped it on a Friday on purpose
so people would miss it and not hear about it. Well, I'm here so you guys will hear about it.
I ask that you guys share this everywhere you can so that way your friends are made aware
of the infringements that are trying to be put in place by the ATF. Sorry about the wind,
if it's getting in my mic but doing the best I can to process it out. So there is a lot in here
guys and basically what they're trying to do is change what is a frame, what is a firearm receiver,
how they have to be identified, how they have to be handled, as well as some changes to what a
silencer or suppressor is. The ATF calls it a silencer. You guys can debate the nomenclature
down below. So here's the summary. I'll read it verbatim to you guys. Some of this I will have
read verbatim because it matters, right? So here we go. They are attempting to provide new
definitions of firearm frame or receiver and frame or receiver. Amend the definition of firearm to
clarify when a firearm parts kit is considered a firearm. We're going to get into that in a
bit of detail here in a second. And gunsmith to clarify the meaning of that term and to explain
that gunsmiths may be licensed solely to mark firearms for unlicensed persons. That's never
been the case before. They're trying to change it to that. Provide definitions for complete weapon,
complete muffler or silencer device, privately made firearm known as PMF going forward and readily
for purposes of clarity given advancements in firearms technology. That readily is going to be
a big one here in just a second. So kind of walk down into the frame or receiver component of this.
Here it says under the new rule, a frame or receiver is any externally viable housing
or holding structure for one or more fire control components. A fire control component
is one of the necessary, is one necessary rather for the firearm to initiate complete
continue firing sequence including but not limited to, not limited to of course not,
any of the following. Hammer, bolt, bolt carrier, breech block, cylinder, trigger mechanism, firing
pin, striker or slide rails. So I just want to kind of take a step back here and let you guys
know what they currently consider to be a frame or receiver. The part of a firearm which provides
the housing for the hammer, bolt or breech lock and firing mechanism and which is usually threaded
at its forward position to receive the barrel. So the reason that's important is recently the ATF
has had to basically drop the charges on a lot of people for illegally making firearms because
the most popular rifle in America, for example the AR-15, does not meet that definition.
So the ATF has arrested people for illegally making AR-15s, manufacturers rather, not just
regular folks out there. And then when they go to court the ATF drops the charges because their
own definition of what that is doesn't meet it. So I think one of the reasons they're trying to
do this is to not have that situation come up again in court and additionally of course they're
trying to go after 80 percent receivers without question. So we're going to go back to the parts
kit, or rather before we get into that, they do say that any firearm part within the new definition
that is identified with a serial number must be presumed absent an official determination by the
ATF or any reliable evidence to the contrary to be a frame or receiver. So under their new proposed
definition an AR-15 upper receiver would be a, you know, a firearm or frame or receiver to them
and would have to be serialized and be treated as a firearm itself. They go through some more there
as you guys can see. I don't want to read everything for you guys but just realize there's more than
what I'm saying here for you. I'm just trying to hit the big points to make the video not an hour
long. Additionally they go into firearm parts and kits. The proposed rule explains that when
a partially complete frame or receiver parts kit has reached the stage in manufacture where it
may be readily completed, assembly, converted, or restored to a functional state, then it is a frame
or receiver that must be marked with a serial number and the standard markings that they go
into. Standard markings for folks that don't know is like the manufacturer's name, the city and the
state where it was manufactured, and then the serial number. There's also a certain depth that they have
to be engraved into as well as a certain size of font. It's all specified by the ATF. Weapon parts
kits with partially complete frames or receivers and containing the necessary parts such that they
may be readily completed, assembled, converted, restored to expel a projectile by the action of an
explosive are firearms for which each frame or receiver of the weapon would need to be marked.
So with that, I mean that goes into a lot of different things. So in theory, I mean you could
fire like if you removed a Glock slide for example and just pulled back the striker assembly on the
rear and then pushed in on the release the striker safety, it would fire. So under this definition
then would a Glock slide also be a firearm? Yeah, exactly. And then of course they say any weapon
including a weapons parts kit in which the frame or receiver of the weapon or within such kit is
destroyed is not considered a firearm. So what they're trying to say there is if you have a bunch
of 80% kits that you bought from like 80% arms or something like that or a polymer 80 sitting around
your garage, if you destroy them then you don't have to worry about it. Okay ATF. Then they go into
the marking requirements which I already kind of hit on a couple minutes ago. Making and record
keeping requirements for PMS. So under the proposed rule, a privately made firearm is a firearm
including a frame or receiver assembled or otherwise produced by a person other than a
licensed manufacturer and without a serial number or identifying markings placed by a licensed
manufacturer at the time the firearm was produced. The term does not include NFA registered firearms
or one made before October 22nd 1968. Of course that's the Gun Control Act, that's what that is
if you guys don't know. And then they go into what licensees must do. Properly mark them, properly
mark acquired firearms as well once the rule becomes final. They're presuming it's going to
become final. And unless already marked by another licensee, properly mark probably mark rather each
PMF within seven days following the date of receipt or acquisition including a personal collection
or before the date of disposition, whichever is sooner. So they're putting a timeline now on when
you have to do it. For example, if you were to, like a manufacturer like myself, I am a firearms
manufacturer 0207, so if I make a machine gun I have 24 hours to mark it. So for these items they're
to say that you have seven. But of course that could change at any time here as we will get to
in just a second. Marking registration and transfer requirements for silencers. Under the proposed
rule, any frame or receiver of a firearm muffler or silencer device is defined as a housing or holding
structure for one or more internal components of the device including but not limited to
baffles, building material, or expansion chamber. Manufacturers and makers of complete muffler or
silencers need only mark each part or specific parts as determined by the ATF, again determined
by the ATF, very very gray in that one, of the device defined as a firearm or rather a frame or
receiver under this rule. However, individual muffler or silencer parts must be marked if they
are disposed of separately from a complete device unless transferred by a qualified manufacturer to
other qualified licensees for the manufacture of repair or complete of complete devices, excuse me.
And then they go into what a manufacturer may do, as you guys can see here on your screen,
and then the records of acquisition and disposition. Under this proposed rule, records of
manufacture, importation, acquisition, and disposition by the manufacturers and importers
must be consolidated to one book similar to dealers and the format containing applicable
columns is specified as part of the regulation. So those of you who aren't FFLs, you've probably
never seen this but there is a pretty standardized FFL book and it basically it says you have to
number the item basically in order that it came in, say who the manufacturer is, what their FFL
number was, the date it was received, the type of firearm it is, the caliber of the firearm, and
I believe the the FFL of who sent it to you is what they require. And they're also requiring
anybody who has any of these items that we talked about to store those records for at least 20 years
which is of course crazy because basically they're applying the FFL rules to individuals
under this proposed change. So what can we do? Well so this rule as of right now isn't stated
to go into effect until 90 days from now. Now the ATF in the past, for those of you guys who are new,
the ATF in the past has said similar things like oh it'll be you know the comment section or the
comments period which is what they're announcing here is over in 60 days and they've actually
closed them in like 15 days before in the past because the ATF is a rogue agency that doesn't
follow the law let alone their own rules. So while they're saying it's 90 days right now,
it may not turn out to be 90 days so I just want to put that out there because history repeats
itself. So what can you do? Submit a comment. It absolutely matters. There's a whole lot of people
out there who are saying that there's nothing we can do, they're going to do what they want.
It's not true. Again a couple examples I will give here real quick is the braces which of course
they're probably going to come after again but they've gone after braces before and because
there's been such an overwhelming pushback against it through these comments that they
allow you to submit, they did not ban braces. The same is true with M855. During the Obama
administration they tried to ban M855 and because everybody had 855, everybody had an AR-15, the
public erupted. Comments were dropped by the hundreds of thousands and the ATF did not ban
it. They did the same thing with 7N6 which is fired through an AK-74 for those that don't know
and because AK-74s are relatively you know scarce compared to an AR-15 in America,
very few comments went through and they banned it. So the comments absolutely do matter. There's
three different ways that you can submit them. You can do it online, mail, and fax. All that
information will be here down below in the video description. I urge you if you're going to submit
a comment, bugs out here a little crazy, if you're going to submit a comment do so in a professional
way. They have some rules here as to what you have to have including your first and last name,
mailing address, be signed, those sorts of things. You don't have to sign it digitally of course,
only that's if you do it by mail. Again all the info to do that will be down below in the video
description. I urge you to do so and I urge you to urge your friends to do so as well to stop this
nonsense because right now there are millions, millions of 80% kits, builds out there as well
as 80% just receivers sitting around waiting to be built. I know lots of people that have stocked
up on 10 to 20 of them because they foresaw this day coming. Unfortunately there's no grandfather
period here so for folks who did that, if you built it you're gonna have to serialize it and
be treated like a firearm for every other type of legal consideration. So there is no grandfather
clause here if this rule goes into effect. So again urge you to comment, let them know that
this is unacceptable. Additionally guys, whatever you write to the ATF, I would also write something
very similar to your congressman. Again with the SB tactical, excuse me the braces, not just SB
tactical but with the brace thing, a lot of prominent congressional members both senate and
house came out and gave very public statements on it. Some of them went on media, social media,
etc to express their concerns over a rogue agency like the ATF doing what they're trying to do
here. So definitely hit them up as well and let them know that this is unacceptable. If you guys
have any questions, anything like that, you let me know down below in the comment section. Again I
didn't hit every detail on there but I hit the big ones and basically they're trying to
infringe on your rights to make a firearm because people in America haven't been able to make their
own firearms since the history of the country. It's always been the case, it's never been illegal and
they're trying to stop that now through a regulation, not a law. Additionally one thing I
didn't really even get into is 3D printing. Obviously I have a 3D printer, most people out
there have the ability to get one. They're about 150 bucks right now. You can 3D print frames, all
of those sorts of things at will very easily and at what point does it readily become convertible?
The ATF isn't telling you. They're just going to say it's readily convertible when we say it is.
Think about that. They're just making people criminals who don't even know they're doing
something illegal because it shouldn't be illegal. It's always been legal. Anyway I can
beat that dead horse to death guys but I think we've beat it enough brother. That's all I got
for you. Unfortunately having to do another one of these videos that I don't want to do but I have
to get the word out to you guys so that way you guys can get it out to your friends and stop this
nonsense before it goes into effect. That's it guys, thanks for watching, thanks for subscribing
and I look forward to seeing everybody in the next video.
