#dollartreediy#dollartree#diyhomedecor In this video, I’m showing you how to turn Dollar Tree pallets into super cute DIY decor. These projects are easy, affordable, and perfect for adding a little personality to your space. If you love Dollar Tree DIY stuff and fun little hacks, you’re gonna love this. So grab your pallets, and let’s make some budget-friendly home decor together!
**Some links are affiliate links where I may earn a small commission at no additional cost to you. Thank you for your support! 🤗 ------------------------------------------------------------------ ❤️ Let’s Connect! I'd love to hear from you! Instagram - CraftingWithJC Pinterest - CraftingWithJC
⭐ BUSINESS INQUIRIES ⭐ [email protected] ------------------------------------------------------------------ Dollar Tree DIYS Playlist • Dollar Tree DIYS ------------------------------------------------------------------ **Please take precaution when painting, sanding or staining, etc. Always make sure you're in a well ventilated area and follow manufacturer's instructions. I want you all to be safe. 🤗
Grab those mini wooden pallets from Dollar Tree and let's create some fun and beautiful
rustic decor.
Dollar Tree sells these really nice wooden slices in different sizes and shapes and for
this project I'll be using a couple of their rectangular ones.
Now I did make sure that they were similar in size because we'll be making a cute little
planter box with them.
I'll also be using a couple of these square mini wooden pallets, also from Dollar Tree.
First I need to remove the jute hanger and the staples.
The staples are pretty secure so I'm using my pliers to pull out the string and a staple
remover to pull the staples out.
It's really attached in there so if you don't want to deal with it, you can always just
leave the staples in place.
I'm going to apply some antique wax over the wooden slices to give them a nice warm look.
I'm using a damp cloth to apply the wax.
I want the wax to go on very lightly so using a damp cloth helps to spread it out without
making it too dark or overpowering.
You can leave it as is for a natural rustic finish or if you prefer you can also paint
it for a completely different look.
Now for the mini wooden square pallets, I'm going to use this beautiful celery green chalk
paint from Waverly.
It's a soft fresh color that adds a pop of brightness without being too overpowering.
I love how chalk paint gives a smooth matte finish and it looks really pretty on these
little wooden pieces.
Now there are some hard to reach areas inside the pallets and so I had to use a smaller
brush to really get into those spots.
Once everything is dried, I'm going to glue them together.
So I'm just applying some wood glue on the sides of the pallets and I'm applying it on
both of them.
And then I stand up one of the slices and attach the pallets on the edges.
And then I attach the remaining wooden slice to form a rectangle.
To make the base, I'll be using a couple small square dowels and three giant craft sticks.
So to match, I'm applying some of that antique wax on the craft sticks.
And then I'm painting the square dowels with that same celery chalk paint.
Okay once that's dry, I'm applying some wood glue on the inside bottom of the square pallets
and then I'm just attaching the dowel to that and I'm making sure that the bottom is flush.
Then I just do the same thing on the opposite side, applying glue on the pallets where the
dowel is going to be attached.
So these dowels are what's going to hold up the craft stick base.
After that, I just apply some glue on the dowels or the ends of the craft sticks and
I place that down to create the base.
And I'm using three craft sticks, spreading them out equally.
Now I was going to end here.
It's so perfect just like that but then I thought it would look really beautiful with
some decorative stenciling.
At least on one side.
It was such a nice blank canvas.
And so I got this stencil three pack from Walmart.
This was just under three dollars.
The stencils are beautiful and the birds on the branches are so charming.
I wanted to add one of those designs.
I'll be using black chalk paint but you know you can also add some different colors there.
Maybe black and white for the feathers on the bird, a dark brown on the branches and
some green on the leaves.
So that's another option.
So I'm applying the black chalk paint over the stencil, making sure to dab out as much
excess paint as I can.
I'm gently tapping it over the stencil, working it in light layers to get a smooth, even coverage.
This way I avoid any smudging and keep the design edges nice and crisp.
Once I'm done with that, I carefully move the stencil before it dries completely and
this one is all done.
It's such a simple yet beautiful project and I love how it turned out.
You can add some flowers, succulents or candles or even use it as a little organizer for your
favorite things.
For the next project, I'll be using four of these mini square wood pallets from Dollar
Tree.
I'm going to transform them into some beautiful coasters.
I found these gorgeous napkins at Michaels and I thought they were just perfect for spring.
The soft pastel colors are exactly what I was looking for and I think they'll look amazing
on the wood.
I'm going to mod podge the napkins onto the pallets using the iron on method, which makes
it super easy to get a smooth finish.
So for the first pallet, I'm brushing mod podge over the entire top and I'm making sure
to apply a nice even layer so the napkin sticks well.
I thought it'd be fun to mix things up and give each one a unique design.
So on another, I'm just applying mod podge on the three center slats.
And another on the two outer ones.
And on the last one, I just do every other.
So you know that way, each coaster has its own look, but they still feel like a set.
And then I just let that mod podge dry completely.
Before I iron on the napkin, I make sure to separate the layers since it's double ply.
You only want to use a top printed layer for this and so I just carefully peel them apart
and then I cut the napkins to fit over the pallets.
Now I'm using my mini heat press on a low setting, but you can also use a regular iron
for this step too.
To protect the napkin from direct heat, I place a sheet of parchment paper over it.
And then I just gently press down and slowly move the heat press across the surface.
The heat reactivates the dried mod podge underneath, causing the napkin to adhere perfectly to
the wood.
I love using the iron on method because it gives such a smooth, clean, bubble free finish
without the risk of wrinkling or tearing the napkin and it really helps the design look
like it's part of the wood itself.
Next, I'm sanding off the overhang to clean up the edges and make everything look nice.
I'm using my mini sander for the outer edges and for those hard to reach spots between
the wood slats, I switch to a smaller sanding sheet.
I carefully cut between the slats first so I can easily slide the sanding sheet right
through.
Wow, as I'm sanding, I'm really loving how it's turning out.
I'm so glad I decided to mix things up where I placed the napkins.
It's actually quite satisfying seeing the different designs come together and you know
what, it's looking even better than I imagined.
I wanted to have a little storage for the coasters so I'm using this small wooden crate
from Dollar Tree and it's just the right size.
I want to match it with the coasters so I'm going to do the same thing, applying mod podge
to the crate and once that dries, ironing on the napkin to reactivate the mod podge
which will adhere the napkin in place.
And I'm going to do that on both sides.
Okay so next is sanding and I'm cutting slits between the gaps with a craft knife so I can
get a sanding sheet right in between to remove the overhang.
The final step is sealing the napkin in place.
So I did apply a layer of mod podge right on top and now that it's dry, I'm ironing
over it to help flatten any bubbles that may have formed.
And you really want to make sure to have a piece of parchment paper in between to protect
the napkin and you also don't want any of that glue getting on your iron.
Now this part is optional but since these are coasters and will be exposed to different
temperatures, I decided to add an extra layer of protection by spraying on some spar urethane
from Minwax.
Especially if you're making these as gifts, that extra layer will just help protect the
design and the wood from moisture and heat so they'll stay looking nice longer.
Alright next I'm adding some cork to the bottom.
I get these cork sheets at Dollar Tree and they're super convenient because they have
a sticky back, which makes the whole process so much easier.
I'm cutting a few strips from each coaster using a craft knife, sticking two strips on
the outer edges of the bottom of each coaster and this will help protect your surfaces from
scratches and make sure the coasters don't slip around.
Alright so I thought I was done but I wanted to take it a step further and make it look
even nicer.
The crate is a little longer than the pallets so I wanted to close those gaps up a bit.
I decided to trim some bamboo sticks to fit and cover up the gap.
I glued them in place and I really love how it turned out.
It just gave everything a more finished, polished look and made the whole thing come together
even better.
For the final project, I'll be using three of Dollar Tree's 6 inch pallets and two of
the square ones.
I'm going to stain them with this water based stain from Varathane in the shade Dark Walnut.
But you can definitely stain or paint them whatever color you prefer.
Now this stain goes on really smoothly with a brush and it's super easy to work with and
since it has poly in it, it also seals it, which makes it even more durable.
I'm also using a smaller brush to get into those hard to reach areas like in between
the slats and inside the square pallets to make sure I cover every little area.
I'll be adding some stenciling on one of the rectangle pallets.
I got this really adorable floral stencil sheet at Walmart and I'll be stenciling in
a floral design on the wood.
So I'm just positioning that in place and then taping it down.
I'll be using white chalk paint from Waverly.
I start by adding a small amount of paint to my brush, then carefully dabbing off the
excess to avoid any bleeding under the stencil.
It's always best to apply the paint in light even layers and this will just help build
up the color gradually, giving you more control and a cleaner finish.
So here's how it looks.
I really love the details.
It just adds that really nice touch.
Now I'm going to start assembling the pallets to form a box or a little crate.
So I begin by applying wood glue to the ends of one of the rectangular pallets.
Then I attach the square pallets to each side, pressing them firmly into place and double
checking that everything lines up.
Next I grab another rectangle pallet, add glue to the ends and repeat the process, attaching
it to the sides of the square pallets.
I make sure everything is snug and secure and I also use some tape to clamp and hold
everything in place while the glue sets.
Finally I add glue along the bottom edges and attach that to the last pallet, which
will be the base.
Pressing it down carefully to make sure it's fully attached.
And that's it!
It comes together so easily but the end result is so beautiful.
It makes a perfect little rustic box that you can use, organizing small items or even
a centerpiece.
Hey thank you so much for watching.
If you enjoyed this video, will you please give it a thumbs up and don't forget to subscribe
if you haven't already.
Until next time, bye!