Roman Shield - Art with Mrs Begum

Shielded Dynasty Network
2 followers
8 Video Views·Mar 12, 2026
Hello you three, welcome to our second art lesson.
I'm really excited because we are going to be making Ronin's shield.
Now I hope you have an A4 piece of card in front of you.
So we are going to be starting with that first as this is the main body of our shield.
So what you are going to need to do is take the four corners and then curve them up.
I'm going to show you how to do that with a pen.
Now you don't have to use a pen, you can do it in a pencil.
But I'm just going to do it in a black pen just because it's easier for you to see.
So I'm going to do that very quickly.
You don't have to do it quickly, I'm just doing it quickly so that you can see.
So one, two, three, four.
When you are happy with the curve, what you are going to do is you are going to cut them out.
So grab your scissors and cut off the four corners.
So we've got one, two, three, four.
Now I'm just going to move my knife away because it's nice and tidy.
So this is what it should look like.
And now you've got a nice curved shield for Aronian Legionary to use.
Once you have cut it out, I would lay it flat on the table and then get your paints ready.
Now I'm going to do my shield in the colour red.
You might want to do the colour blue.
Those would be the two main colours that Aronians use to paint and decorate their shields.
So that's what I'm going to use.
I'm going to use red because I like that colour a bit more, it's brighter.
So I'm going to put some paint onto my palette.
And then I'll keep some water next to me as well.
Because sometimes what happens with acrylic paint is that when you are trying to brush it across,
it starts to get really dry so the water will help push the paint across.
And I would say, when you are painting it, to do it across this way.
And try to keep your painting in one direction.
Because if you go up and down, it's going to look a bit messy.
So I'm going to do that.
Now that you've seen how I painted my shield, this is what it looks like once it's dried.
As you may have noticed, whilst I was painting it, it got quite messy.
So hopefully you were smarter than I was and used some resources.
Right, so now that I've painted the main body of my shield,
what I'm going to do is I'm going to grab some silver paper.
And then grab something square to do an outline over.
And this is going to go in the middle of my Roman shield.
So I'm just going to turn my silver paper over and then grab my black pen again.
And just do a square.
You could use anything, as long as the square just fits into the middle
and it doesn't take up a lot of space, that would be perfect.
So that's my square. I'm just going to quickly cut that out.
Now that I have got my square, what I'm going to do is I'm going to get my glue stick
and I'm going to stick it onto the middle of my Roman shield.
And it should look like that.
Now what you are going to do is you are going to make the golden decoration
that goes around your Roman shield.
So what you need to do is you need to grab a rectangle piece of gold paper
and then make sure that the length of your wing design is going to be big enough
for this square in the middle.
So what you are going to do is you are going to get this square
that you used to make the template of the middle of the shield
and you are going to draw one of the sides at the bottom of your gold piece of paper.
And I'll bring it closer so that you can have a look.
So if I bring it really close, you can see a little faint line at the bottom there.
That is how I'm going to measure the decoration.
Once I've done that, I am going to fold my paper in half
so that the length of the square is half and half.
And on one of the sides I'm only going to do the decoration
because the other side will then be symmetric.
So what you are going to do is you are going to draw an arch going outwards.
So I'll do that first.
Like that. So you should have an arch going outwards.
And then you are going to do almost like a feathery arch coming inwards.
So one, two, three.
And it should look a bit like that.
Once you've done that you can cut it out.
So I'm going to grab my scissors and I'm going to quickly cut that out.
Okay, I haven't stuck the two gold wings yet
but this is what it will look like when I stuck it down.
So what you need to do now is grab your glue stick
and then stick your two wings down so that it's secure
and then you can move on to the next part of the decoration.
Okay, once you've stuck down your angel wings
what we are going to do next is we are going to cut rectangles
that are about 11cm long.
And why we need these is because we are going to turn them into triangles
that look a bit like this.
And then we are going to cut around this area
to make the second part of our decoration.
So what I'm going to do now is I am going to cut it using scissors.
So one and two.
So once I've cut it out it will look like that.
And these are then going to go at the top and the bottom of my shield.
So I'm going to put one there and then I'm going to put an identical one
that will go down there.
So I'm going to do that now and then we are going to move on.
Okay, next we are going to cut out four pieces of gold paper
to do the arrow decoration.
So the first thing I've done here is on the back of my gold paper
I have drawn a triangle that looks like it's got sort of like
staircases coming up it.
So there's one, two, three.
And what you need is four of these.
Now these four are then going to go in the corners of your square.
So what I'm going to do now is I am going to cut out my four corners of arrows.
Now I have cut out my four pieces of arrows.
So one, two, three, four.
And what I'm going to do now is I am going to stick these onto my shield
and show you what that looks like.
Okay, I have not glued mine on but it should look like that.
So four really cool arrows that complete the decoration of the Roman Shield.
Okay, now that you have finished the front of your shield
what you are going to do is you are going to take a bit of white piece of paper
like this and then you are going to cut it to shape the background.
Now I've already done mine so this is what mine looks like.
So that the back is completely covered and you can't see any cardboard.
Now once you've done that you are then going to cut yourself a handle.
So I just used scrap piece of card that was left over.
And then what you are going to do is you are going to bend it
and then have two ends, two flaps, one there and one there.
And you are going to use sellotape to stick that down enough
so if you look down on the video that's so that I can hold it like that.
So what I am going to do is I am going to stick some sellotape on the two ends
so that I can hold up my shield and show you how it looks.
Just a nice big strip so that I don't have to go back to it.
And then take small parts and just stick the two wings that I folded down.
So I'll do one side first and just make sure it's very secure.
So maybe put more than one strip.
And then I'm going to bend it like that so that I can get a good grip.
And I'm going to try more styles.
Now what you could do is you could get a parent or a care or somebody at home
to help you do this part.
So I managed to do it all. I'm not going to show you just yet.
And then I'm going to cut a few more just because I've got some extra strips
and because some of it is starting to pop up.
So I'm going to do that quickly.
I seem to do everything quickly.
And are you ready?
And here we have our rolling shield.
And if I show you at the back it holds on quite securely.
And this is what your finished shield should look like.
Now mine is quite, I feel like it's quite detailed
but if you really wanted to do more creative
you could maybe add like a little gold circle in the middle.
You could add some decoration on the side using felt tips
or with like a different marker.
But I like the way it looks like this.
Even though it's a bit simple it does reflect a lot of the Roman soldiers.
And now you can go off and maybe put it on display
or you can go and have a Roman battle with your siblings
or your classmates if you're in school and have fun with that.
I hope you enjoyed this week's art video
and I look forward to seeing everyone very soon or next week in art.
And I'm very excited to see what we are going to do on it.
Take care, everyone. See you soon.
