Bowers Group VERS 375 Silencer Review

Uniform & Arms
3 followers
1 Video View·Mar 7, 2026
We mount the lightweight Bowers Group VERS 375 silencer on a few hosts and test it's db reduction, discuss its features, and what I think of it overall 🇺🇸
Welcome back everyone. As you probably guessed from the title of the video,
we are going over this silencer that's in my hand right here. This one's from Bowers Group.
We've reviewed a lot of their stuff in the past. Now we're moving on to the Burst 375. I do believe
this is new for this year, but one thing that I noticed just holding it here that you guys of
course can't tell is that this thing is lightweight. So it's a reasonably large silencer I
guess you'd say compared to today's standards, but it weighs 15.4 ounces. So it's pretty darn
lightweight. It's just over eight inches. Its outer diameter is 1.75 inches. So in terms of
size, there's definitely bigger cans out there, but there's, you know, smaller ones as well.
Kind of a little bit on the big side, but weight wise it's doing fantastic. That's due to the
titanium stack on the inside. One sort of con about the lightweight, if you will, is that they
recommend that you don't get the silencer over 500 degrees. So if you're going to be, you know,
mounting this up on a select fire AR-10 or something like that, probably not the best
silencer for that use. But for 99% of what folks are going to be shooting through it,
it'll be just fine in a non-issue. So obviously it's a 375 diameter, so lots and lots of cartridges
will go through there. But what we're going to do next is actually check out the decibel
meter and see how it does on a few different setups, including an AK with subsonic ammo,
MP5, and 300 blackout, and see what kind of reduction we can get with this silencer.
The MP5 doesn't really fit well in the mount, but we're going with it. It's 1.5 meters off the
ground. The meter is one meter to the left. So we have some 147 grain Minuteman munitions
in there, and we'll get a baseline. Let's throw the can on. Everything is the same,
just threw the can on. We're going to get a baseline here. We have the Palmetto State
Armory 10.5 inch upper. This one has the Surefire bolt carrier group for what it's worth,
and we are 1.5 meters up and one meter to the left. We have some Fiocchi subs in there,
and we'll see how it does.
Same everything, just added the can. So you guys just saw the numbers there in terms of reduction,
and one thing I think is pretty interesting just from that comparison there is how different the
numbers were just depending on the host. So it definitely makes a difference what gun you're
using, the type of system, those sorts of things. And just keep that in mind, rather, I should say,
if you're ever watching a silencer review, because you're going to see different numbers
from different folks and different atmospherics and on different guns. So definitely plays a role
in it for sure. So one thing that you guys probably noticed with that video is that
it's pretty easy to mount up. Bowers Group is one thing I really like about them is that their
cans use what's called the Burst Adapt system, which is this little guy right here. So basically
they make it for just about any thread pattern I'm aware of anyway, and all you got to do is just
screw it on there and you're good to go. And I should also point out that the Burst Adapt mount
itself, as well as the silencer, has wrench flats on it. Something I harp on in silencer reviews
simply because wrench flats should be, in my opinion, mandatory if you're doing anything
related with silencers, because when these things get hot, they get carbon lock, all kinds of things
like that. That's not unique to Bowers Group or anything, that's all silencers. So you want a way
to be able to break it free, but screws on, mounts up just like that, and you're good to go. I do
recommend using either some red loctite or whatever type of thread locker you use on there. So that
way the mount doesn't move, I've not had any issues with it moving at all. I'm not sure which
video clips I pulled out to actually roll in during this video, but I've used this on 9mm.
You guys obviously saw it was mounted up there on the 3 lug adapter, so they do make a 3 lug adapter
for their Burst system. We use it on that, we use the M300 Blackout, 6.5 Grendel, which is this guy
right here, a 308 AR-10, we use it on that as well. And again, just keep it under 500 degrees,
you'll be just fine, and normal shooting will do that, you're not going to have any issues with
that. So again, we've used it on a ton of different firearms, and again, have had zero issues with it.
In terms of like blowback in your system, what can you expect? I'd say about average. You know,
it's not like an OSS flow-through can, so you know, you are going to have some increased back
pressure if you're using it in a semi-auto, of course in a bolt gun, kind of a moot point,
but just know that going forward. Additionally, this is one of the silencers on the market that
works with .350 Winchester, which is a relatively new cartridge, and a lot of your, you know,
.30 cal cans won't work with that because of the diameter of the bullet. This will, so if you're
somebody who hunts with .350 Winchester, it's a good option to look at, in my opinion. Price on
this guy is going to come in at $950 over on Bauer's website, and you guys can head over there,
order it direct from them, should you choose to do so. But in terms of like value, all those sorts
of things, performance, I think it's pretty good, pretty solid. It's a very versatile can, like we
talked about. Really, 95% of the rifle calibers out there, this can can handle it just fine,
and I know there's a lot of folks that want that one can for a bunch of different rifles.
It's a good option. Nice and lightweight, which I do like as well, but that's pretty much it. If
you guys have any questions about the can, anything like that, you can always post them
down below in the comment section. If you have a question that you need to have answered by me,
the best place to reach me is over at my Facebook page. I do get to everybody over there eventually.
Sometimes it takes me time because there's literally hundreds of thousands of you and
only one of me, but that is the best place to reach me. Additionally, if this, for whatever
reason, goes on sale or anything like that, I post those deals over on my Facebook page as well. So
that's it, guys. Thanks for watching. If you're new here and you aren't subscribed, go ahead and
hit that subscribe button if you like these types of videos, and hope to see everybody in the next video.
