Feb 15, 2026 This oil painting had a serious issue — the paint was lifting off the canvas. In this first episode, I stabilize the fragile paint layer around a structural hole before beginning the full restoration.
🔗 Watch the complete restoration series: • Restoring a 19th Century Oil Painting – Va...
For this consolidation, I prepare traditional isinglass — a conservation adhesive made from sturgeon air bladders. After soaking the material in distilled water, it is gently heated to release collagen, filtered, and then carefully applied to secure the lifting paint layer back to the canvas. Isinglass has been used for centuries in fine art conservation due to its strength, reversibility, and compatibility with historic materials.
This is a professional oil painting restoration focused on conservation and structural stabilization.
Eduardo Art Restorations | Oil Painting Restoration | Conservation Process
Hello, I hope you are well and I welcome you to my studio.
In today's video I will start the restoration of this painting here.
This is a painting which the technique is oil on canvas.
It's a painting from an artist from Belgium and it's a beautiful painting.
This painter used to paint landscapes but also a lot of interior views and in this case
I'll be working in one of his works that is an interior view.
I presume this may be a view from the kitchen according with these
small things that are here and also here like a table.
It's interesting that these shoes here are the ones that
normally the people from Holland use when they work on the farms.
When they used to work on farms they used to wear this kind of shoes.
The owner of this painting came to me and actually she was a little bit worried
because she let it fall and apparently did fall over something that was cutting
and made this hole so this is the main thing that I'll be restoring.
This hole did preserve some fibers but only when I take out the painting from the frame
I can be more sure which technique I will use.
But the rest of the painting has very small areas that need to be also restored
but they are very small.
The first procedure that I'm going to do is to remove the painting from the frame
and here we have the back of the painting.
I can show you that there are several references to the life of this painting.
Apparently the last time this painting was sold was around 1946
and here we have the hole from viewing it from the back we have the hole we can see that still
some fibers and what I'm going to do first is to try to stabilize this area
and put the fibers on the right place then I'll see which technique I will have to use or to apply
to solve this situation.
But the first thing let's remove the painting out of the stretching frame
because there are several nails here that need to be removed.
This old system was not the best but on that time was what was available.
I remove these nails after and here it is the painting and I'm going to have an analysis
here because I see here there's another situation that needs to be verified first.
I'm going to show you.
So here we have the painting.
It is a painting that is signed here by the artist Dolph van Rooij.
There are certain things very small that need to be repaired.
The painting is also a little bit dirty but not that much at all.
So the main situation that needs to be verified is this hole here.
But as I told you there are certain things here that need to be corrected even first
I start taking care of the hole.
You see these areas here from these little things looks like cracks but they are not cracks.
This is the painting that starts to come off from the canvas.
And this is a dangerous situation if I do not take care of it right now.
Because this paint means it's very fragile so can really come off very quickly.
And what I need to do this is to re-glue the the paint to the canvas.
And for that I will use a special glue that I will prepare called ease and glass.
It's a glue that is based on air bladers from a fish called sturgeon.
The famous one that makes the the caviar.
And this glue will penetrate is the best glue for this situation.
I could use fish glue or other glue but
the sturgeon glue really really works on this situation where the paint needs to be re-glued
to the canvas.
And I'm going now to prepare the glue.
You see here those are the the air bladers from the fish.
They are dried.
I'm going to remove one.
They are quite big as you see but probably I'm going to get one a little bit smaller.
Maybe this one because I will not need so much.
Although I'm going to prepare a quantity that probably I will dry after.
And it will make a film and that film I can cut and use afterwards in other works.
So I'm already I'm going already to prepare a quantity that I can keep some for the future use.
In a first stage you see I'd like to cut it but it's to cut it in small pieces.
It's not possible.
It's very very very difficult.
So what I'm going to do and needs to be done at this stage is to soak these in water.
So I have here a bigger one.
Actually probably it's too big but it's okay.
But I'm going to put those pieces here.
So I have the pieces here as you can see and I'm going to cover them with water.
This is the mineralized water and this will stay like this several hours because needs to be soaked.
The bladers need to be re-hydrated.
So when they are ready I will use the hot plate here to warm them up.
But for now they will have to be here until be in the right stage to go to the hot plate.
Just going to put a little bit more.
So we are back to the glue.
I had to let this soak all overnight.
So now it's already re-hydrated as you can see and needs heat now.
I'm going to use, because I have, I will use this magnetic plate.
So this allows me to control very well the temperature.
So I can use it basically on this level and this will heat the cup with the air bladers.
Actually because I do have this I can put directly.
Also because I'm going to have, I have here a magnetic thing that will allows me
to have some kind of steering.
But for those that do not have this magnetic plate they can use the traditional heating system
that you just have that mechanism that gives you heat.
That can be electrical or gas or anything you want.
But then you will need two pans.
One pan with water where you put again this inside.
So in fact that would be what it's called a bain-marie which is a French word.
I can also control the warmth with this thermometer and for example now
we have to turn it on right now it will it's only this temperature.
But we will have to wait until it gets between 50 and 60 degrees.
60 is the really really maximum because if it goes over 60 this glue will lose properties.
So now the heating will make the collagen and all the properties to come out of the bladders
and go into the water and that will form the glue.
As you can see there are pieces of leather a lot.
But for this situation I am going to build a very traditional thing.
So I'm just going to put this a little bit aside.
I have here this piece because I'm going to prepare it to normally pass what we are going
to get the glue.
I will pass by this and it will filter.
And to do that I'm just going to use this normal you know the normal socks that are
very thin.
Okay and basically I will just do like this and normally I will do two times.
And what I'm going to do I'm going to apply with the needle that I did prepare with a
little bit of the wood that I just put here.
What I'm going to do is to pass over here on the center through the hole.
And this will make this situation like this.
And then I just can just have to hold it like this.
So this will be enough to catch the glue and to filter and to get a clear clear glue on
this cup.
So now we just have to give time because this has to simmer for a while and it will
take time.
So when it's ready I will come back to you.
So our glue is now ready.
It was here for about one hour and it's already ready so I can turn everything off.
And now I'm going to clear the the gelatin.
So this is gold I will take care of this after.
But this product now it's clear and this is the material that I will use
to stabilize the paint on the canvas.
This is a good quantity I know but what I can do after I can dry this.
This will make like a film and that film after I can broke in pieces and if I need a piece
in the future I can rehydrate that piece and then get this final product again.
So this is not a waste.
So I'm going to start preparing here the table so I can lay down the painting.
I'm just going to fix this a little bit so it doesn't move so much.
As you see the painting still on its stretching frame and the area that I'm going to
make the fixation of the painting is around here.
So there was no need to remove the painting of the stretching frame because it's in a very
good condition and for this specific situation there's no need to put the painting on that
stress.
What I have to do is because I'm going to apply pressure from the other side I need
to prepare just to give some support here and I'm going to put a little bit of this
preparation that I'm going to fix.
I have a support that can apply pressure on this side.
Okay so it's perfectly okay.
Okay so I'm going to start the stabilization of this area here.
The glue will penetrate because of the capillarity of the paint layer.
I apply some warm already a slightly difference so now everything is again stabilized.
The paint layer is no longer with that crackly showing the painting that wanted to come off.
So now it's totally totally stabilized.
What I'm going to do I'm going to leave it like this until tomorrow with some weight.
So tomorrow I will start again.
So for today we just leave the painting like this.
And for today I will stop the video here.
Next week I will continue with the consolidation and restoration of this painting.
To you that stayed with me in the video until now thank you very much for watching.
And if you enjoyed please do this click on the like button.
I would love to read your comments so if you have a comment to make please do it.
It's very generous from you.
And if you enjoy to join the journey please subscribe.
So see you on the next week.
Thank you for watching and take care.
Bye.