Subscriber Request: Wiring The FUN Lines Part 2 - Turnout Controls

Toy Train Tips And Tricks
93 followers
9 Video Views·Mar 3, 2026
Episode 54: Here's how I wire the turnouts on the FUN Lines using push-button controls. Diagrams are included for both standard Lionel O27 operation and modified constant-voltage operation.
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Keep the trains running!
AI Generated·May contain errors
Today we're going to try something really crazy.
23.9 close enough. These are very close to true o scale. You don't want to try this with
a modern transformer. So this is based off of a real VNO caboose from 1916 up to 1938.
That is not helpful. Now it is truth or consequences time. Part of the circuit is
running through this wire arm here. Very simple but effective animation for the layout.
All right, so let's talk turnouts. For the turnouts, there's multiple ways to do this,
but for mine, on my track diagram, I have these red push buttons. And as you see,
as the train would come along this way, if I want to keep it on the main line,
I would push this rotary to throw the turnout that way. Or if I want to come into the yard,
I press this one to throw this switch this way. And just because I ran out of room here,
these are not exactly right here on the terminal. This throws this one this way,
automatically to this way. And then I can throw to each of my three sidings, one, two, three,
by choosing the different rotaries. So each rotary is wired to one side of the turnout.
Let's take a look at the turnouts. Okay, and so you see, we have
again my blue or black common, because I ran out of black wire and had some blue.
So this is my common. This goes down to the plate on my common bus underneath the layout.
And then we have my red to use the turn. And again, I ran out of green, so I've got more blue.
But as long as you know what is what, and I have it marked on my diagram in my notebook
as to which wire is what. What I preferred to do, I did it this way on this one. I've still got my
blue as my common, but here I had two conductor garage door opener wire. One side has a stripe,
one does not. So the stripe, whether it's red or black, depending on which one,
is for turning. And the non-stripe is to throw the turnout in the straight direction.
So again, this goes to a plate underneath the layout. And this is actually just supplying
common feed to the rails and the switch motor. This does not go back to my control button.
Each of my control buttons, the first thing I did was one side of each push button,
which you can see here, goes to the common way down here. The other side
goes from that terminal. Try this one. Move the camera around. Okay. The other side,
which this one I've disconnected because I changed the track plan, goes to, here you can see them
better. One side, in this case the blue, goes to common. And the stripe wire, or the stripe wire,
this is for a turnout's curved side. And the corresponding one, there we go, is, this would
go to the straight side. That makes more sense if you flip over the panel. Also, to avoid solder
connections, I use these quick connects. These are really cool. If you are a messy solder like I am,
you can prepare the wire. Let's see, this one looks better. You can prepare the wire. Let me
pull this off. There you go. You can prepare the wire on the bench or whatever. And when you're
to wire it up, you just slide it into the contact. I can do this one-handed. There,
push it in there, and you're ready to go. And the insulators help keep the space so you don't get a
short circuit. I said this is an unfinished basement. Things like that happen. Okay,
so I use the quick connects on that. The other thing that that does is if I make a mistake,
it's easy to pop it off and replace it rather than having to go in and re-solder it.
Okay, so this side, if you follow it all the way around and down, goes to my common bus,
which goes to my common bus on all of these switches. And then each of the other side,
go down here, go to this terminal, which says turnouts. And again, which one is which,
I have it marked in my handy notebook. Oh, that's for track power. Go to the next page.
Here we go. Turnout block one, and it tells me which switch I've got it wired to.
So keeping a handy notebook can work just as well as drawing out a complicated schematic,
as long as you know where things are. So again, this is a work in progress. This is what I have
so far. And eventually, once I get everything wired in, we'll get in with the cable ties and
help eliminate some of the spaghetti. The other reason to write everything down is, you know,
sometimes you're halfway through a wiring project, you get called away to do something
else, you come back a couple of weeks later, and you say, what did I do? So having it written down
is always handy. So that's what that notebook is for. So some of you are probably really confused,
that's okay. But that gives you a basic overview of my panel and how I've wired it up for
lock control and also for turnouts. Okay, so just like with the track power,
wanted to clarify a little bit what's going on with the turnouts. So this is what it looks like
if you're using the standard Lionel track power for your 027 turnouts. No modifications,
just the way they're set up. So you've got your transformer that's supplying the power to the
track. So your transformer, again, the common side goes to the common bus,
regardless of how many power packs you have, all the power packs go to the common bus.
Okay, so whichever power pack is supplying power to this block,
you know, it's going to go through your selector switch and bus and all that. I didn't show all
that, but basically the power coming from the power pack controlling power to the track goes
to the center rail, and that is going to feed the power for the turnout internally. I didn't
show all the internal wiring here, but we've got our three contacts. Contact number one is the
common. I wire that up to the common bus. You do not have to, because it's already internally wired
to the outside rail, which is part of the common, but I'm showing it here in case you do it.
So I wire that up. That becomes optional using the push buttons. So these represent my two
different push buttons. One side of each push button, one contact is wired to the common bus
for all of my buttons, because with the Lionel switches, throwing the solenoid depends on what
happens with the common side. That's how the nonderail feature works with the outside rail.
Everything has to do with the common. Okay, so the common bus attaches to one side of all,
one contact on all of the push buttons. The other contact goes to a corresponding post on the
turnout. So red here would be for throwing the turnout for curve. Traditionally that's red.
Here in the middle. So when I push this button, it completes the circuit for here,
throws the turnout this way. This push button is for throwing the turnout to straight. So again,
when I press this button, it completes the circuit going to the solenoid on this side.
The power for the solenoid is wired internally and is connected to the center rail. So as long
as there's track power on, this works fine. Okay. So this does not show how I wire them up with my
modifications. That is this next diagram. Okay. So this diagram shows what's going on.
When I've made my modification, I've added my fourth post to wire this up for constant voltage.
So now you see that the power pack is supplying my constant voltage. My accessory power pack
still wired to the common bus. The hot side connects to my new fourth post, which I have
internally wired. I bypassed the connection to the center rail. All of the power now comes from
the accessory transformer at my constant voltage between 12 and 16 volts. Everything else is the
same. One side of each button goes to the common bus. One goes to curve. One goes to straight.
Press the button. It completes the circuit. Power to the solenoid comes directly from the
transformer, not from the track. So I could actually have a train stopped here, no power
going to the track whatsoever, and I can still throw my turnouts. So again, I hope this helps.
And that's the two different ways that I wired up. You may do it somewhat differently, but
that gives you the basic idea of what I'm doing. So I hope this helped, and I'll show you more
progress as I get more done from time to time. But this is the basic of my control panel, how I'm
making it work, and hopefully there's some ideas in there for you. Obviously yours will be completely
different because your layout will be different than mine, but like I said, some of the principles
apply from one to another. So until then, if you like the video, well, please like it, subscribe,
share, tell your friends, tell your neighbors, and be sure to come back next time. And until then,
let's keep the trains running.
