3D Adapter! Easily Couple Lionel And Marx Cars Together (And Other Methods)

Toy Train Tips And Tricks
93 followers
1 Video View·Mar 3, 2026
Episode 74: Ever since Lionel began producing its knuckle coupler in 1945, operators have been vexed by the issue of coupler incompatibility between Lionel and Marx couplers.
Now, there is a solution!
This handy 3D printed device connects Lionel knuckle couplers (not Scout) with Marx knuckle and tab-and-slot couplers (and possibly with Marx plastic "fork" or "tilt" couplers!
Free download links:
https://www.tinkercad.com/things/00Jfd3noHsF-marx-lionel-coupler-adapter
https://www.thingiverse.com/thing:4805706
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Keep the trains running!
Hello again, this is Mike with Toy Train Tips and Tricks, and at first glance this train may just
look like your typical 027 mashup, except maybe for the backwards tender in the middle of the train.
But let's take a closer look at what we have here, and we might find something interesting.
So we start with a K-Line tender. We've got our Lionel MPC Scout-derived boxcar.
Then we have a Marks 8-wheel plastic boxcar, a Marks tender, back to a Lionel MPC flat car,
to a Marks 4-wheel plastic hopper car, and a Lionel MPC caboose.
And notice that we have different couplers. We have the Lionel knuckle coupler,
we have the Marks knuckle coupler, back to the Lionel knuckle, Lionel knuckle to the Marks
tab and snot, Marks knuckles again to the Lionel MPC, and then back to normal.
So here we have what's normally a coupler compatibility issue. Normally a Marks knuckle
coupler, a Marks tab and snot coupler, is incompatible with a Lionel knuckle.
But I've developed this handy little device, and I've printed these out, and I'm putting the link
on Thingiverse and Tinkercad so that you can have it too. And basically here's the concept.
Turn one upside down, and first we have, there we go, first we have this tab here
that fits inside the Lionel knuckle. We have wings on either side that helps keep
the adapter from rotating, and thus this sliding out of the coupler. And then we have our tab.
It has to be thin enough to go inside the Marks snot for the tab and snot, but also strong enough
to handle weight. That's why it's thicker here at this part. Added some structural support there.
And as you can see, it works quite well. As long as there's not a huge,
don't have a huge strain with these at the front, it's quite secure, and there's no modification
whatsoever to the rolling stock. This is just held on with gravity. Ta-da! I've removed it,
and I put it back on. It's a little harder to get back on because you line up
the big square side goes to the Lionel coupler. See if I can do that one-handed,
and then you line up the tab. Can I do this with one hand? Yeah, there we go.
And that's all there is to it. So a handy Lionel to Marks coupler conversion. This works with the
Marks plastic knuckle couplers. This works with the Marks tab and snot couplers. It should work
with the plastic tilt-type couplers that have the snot in them. If anyone tries this and let
me know the success, I don't have any of those to try. It does not work with the metal-type
fork couplers that do not have a snot in them, but you can use the plastic kind as kind of an
idler between them in your Marks. So it's not totally universal Lionel to Marks. It doesn't
work with those couplers. And obviously I haven't tried with any pre-war type couplers, but for
post-war, it should work with Lionel to any Marks coupler except for the metal tilt-type fork
couplers. So there you go. A handy-dandy Lionel to Marks coupler conversion so that you can mix
Lionel and Marks rolling stock. And you can see here that the Lionel Scoutbox car and the Marks
plastic are very comparable in size and they run very well together as long as you can overcome
the coupler issues. The first couple of test shots I did were in black. I found that those were really
hard to find when I put them on the layout. That's why the bright colors on this one and blue happens
to be what I already had in the printer. So I may choose another color, but once I set the black
ones down, I was having trouble finding where I put them on the layout. So bright colors are better
for that. So anyway, this is a free download on Thingiverse or Tinkercad. Try them out if you
have your own 3D printer, if you have a friend with a 3D printer, or, you know, search around,
have someone print them for you. But it is a quick and easy and inexpensive solution
to the age-old problem of compatibility between Lionel and Marks. So I hope you found this useful.
Like it. Share it. Comment. Please subscribe. Tell your friends. Tell your neighbors.
Keep the trains running, and we'll catch you next time on Toy Train Tips.
