Lionel's #6-8702 Southern Crescent 4-6-4 steamer and its five-car passenger train were produced in 1977 and 1978. This stunning set has been part of my collection since I received it as a Christmas gift in 1978.
About a decade ago, the train developed a mysterious short circuit, and due to sudden changes in my layout and housing, the locomotive remained in a box in pieces from then until now.
After a few days' efforts and some replacement parts, the Southern Crescent is once again the queen of my passenger fleet.
**As an Amazon Associate and a member of the eBay Partner Network, I may receive commissions on qualifying sales generated from the links on this channel.***
Video: How To Add Flicker-Free LEDs To MPC Passenger Cars (And Replace Pickup Rollers): https://youtu.be/tuZ9DmGlydQ
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
My Lionel MPC Southern Crescent, repaired, restored, and ready to roll on this episode
of Toy Train Tips and Tricks. Hello again, this is Mike with Toy Train Tips and Tricks,
and this is my Lionel MPC Southern Crescent Limited passenger set from 1977 and 1978.
Since taking over Lionel train production in 1970, MPC had offered a number of steam-powered
passenger sets. These sets, such as the Milwaukee Special, the Broadway Limited,
and the Capital Limited had been offered as starter sets, including track and transform.
These sets featured newly-tooled 027 heavyweight passenger cars, the so-called Baby Madison cars,
and were powered by versions of Lionel's tried-and-true 442 steam locomotive.
When Lionel released the Amtrak Lakeshore Limited set in 1976, it replaced the steam-powered
passenger sets with an Alco FA and reissued streamlined passenger cars. It made little
sense for Lionel to offer another 027 passenger starter set alongside the diesel, so the question
became what to do with the new heavyweight car tooling. In 1977, Lionel had their answer.
While the Lakeshore returned in the 027 starter set slot, MPC tried a new approach with the
heavyweight cars. Instead of a starter set, they decided instead to target a more advanced
hobbyist and collectors, with a new train led by a larger steamer. Based on the post-war number
2046-464 Hudson, the locomotive and five passenger cars would all be available for
separate purchase without track or transformer. But what railroad would this new set represent?
MPC chose Southern's Crescent Limited as the basis for this new passenger set.
In addition to the train's stunning color scheme, there were several other good reasons to select
this train in 1977. Among the railroads that declined to join Amtrak in 1971 was the Southern
Railway, and Southern's Crescent Limited was one of the few deluxe trains still running
independently on American railroads in 1977. While the Southern train appealed to an underrepresented
geographic area in the Lionel line, you know, the southeastern U.S., the Crescent also had
connections in Washington, D.C. and New York, so there was still some appeal in the East Coast
major markets as well. Also, the former Southern steam locomotive number 4501 had been a frequent
star of mainline excursion trains throughout the 1970s, and so there was an existing familiarity
with Southern steam locomotives among the public. The locomotive featured a die-cast boiler,
smoke, magnetraction, which was somewhat of a rarity in MPC production, and MPC's
electronic mighty sound of steam. All cars featured interior illumination and operating
couplers. My set arrived as a Christmas gift in 1978, and it was run often, long, and hard
over the years, even suffering a handful of falls off the train table. Other derailments claimed
coupler knuckles, and time and frequent use led to the demise of each and every light bulb on the train
from the locomotive headlight to every single bulb in every passenger car, and even wore out
some of the pickup rollers. About a decade ago, the locomotive developed a sudden and mysterious
short circuit. I disassembled the engine looking for the reason, but then life intervened. First
was a new need to redesign my existing layout to better serve my kids, and that was followed by
several housing relocations, and that meant that the pieces of the disassembled engine sat
in a plastic box, patiently waiting repair for many years. Until now. With a little unexpected
time on my hands due to rainy weather, I finally opened up the box to inspect and repair the
locomotive. While I had everything apart, I went ahead and replaced the motor brushes,
and cleaned the motor commutator, and gave everything a proper lubrication.
I also found a surprise. For a short time in the 1970s, my father and I decided that
steel wool was an effective tool for track cleaning. Bad idea. This was my only magnetraction
locomotive, so it had the honor of picking up all of the little bits of steel wool that had
fallen between the rails. The wheel axles were coated in a cloud of metal shavings.
The most time-consuming part of this servicing was using long, thin pliers and cotton swabs to
remove the metal shavings from all the places where they didn't belong. Lesson learned. No
steel wool. Through trial and error, I determined that the short circuit is somewhere in the reverse
unit. I've cleaned the unit multiple times, but so far, I've been unsuccessful in locating the
exact culprit. So, in the meantime, I bypassed the reverse unit and wired the engine for forward-only
operation. After all, it's a passenger train, and I don't envision doing a whole lot of switching
with it. I replaced the headlight with a donor bulb from another locomotive that I had previously
converted to LEDs. I thought it would be easier in this case to keep the standard lamp rather than to
create a new mount for the headlight. The boiler front had suffered damage from a number of
accidents over the years, and so I replaced this, as well as the green marker jewels, with new parts
from the train tender. By the way, now that it's been 40 to 80 years in many cases since these
trains were produced, replacement parts for post-war and NPC trains are becoming increasingly
difficult to find. That might be one reason why Lionel pulled its NPC parts diagrams off of its
webpage last year. Perhaps too many people were contacting them for parts that are simply no
longer available. The paint had also suffered from years of use and abuse, especially on the
back side of the cab. This touch-up pen from Hobby Lobby is a pretty close match and makes these
blemishes a bit more difficult to see. The rear truck on the tender was damaged some 35 years ago
or so from a fall from the train table, and I had glued the truck back together numerous times over
the years, but I finally decided just to replace the entire truck with a spare from a scrap caboose.
You can tell this is not original, as the tender now has an operating coupler
instead of the original dummy coupler. Several of the cars had busted coupler knuckles and worn
pickup rollers, which I replaced using the same methods I had demonstrated in a previous video.
There is a link to that video in the description and at the end of this video. I already replaced
the lighting in some of the cars with LED tape lights and an anti-flicker circuit that I described
also in a previous video, and again there is a link to that video and description in the end of
this video. Lacking enough capacitors to do the remaining cars, I instead replaced the bulbs in
these cars with these soft white LEDs from Amazon. While I like the anti-flicker attributes of the
other replacements, I find that the light from the LED tapes is really a bit too harsh. I will
probably replace the lighting in these cars with these soft white bulbs at some point,
although these are slightly more expensive than the tape light system.
So, here's the finished and nearly complete train. A matching number 19-001 dining car was produced
in 1987 for this set, but I have yet to find one available for a price that I am willing to pay.
On my train, you will also notice two head-in cars. One is a generic Railway Express Agency
car from Menards, and the second is a Crescent Limited REA made by A-Line in the 1990s. My
Southern Crescent Limited is again ready to take its place as the flagship passenger train on my
layout. For MPC, the Southern Crescent was an obvious sales success. As it returned in the
1978 along with the classic Blue Comet, now featuring six-wheel trucks on the passenger
cars. The Blue Comet returned in 1979 to be followed in 1980 by the Chessie Steam Special,
this time led by MPC's first reissue of the classic Lionel 284 Berkshire locomotive,
and a new electronic whistle. The series of Bamey Madison sets wrapped up in 1981
with the stunning Red Chicago & Alton Limited set. These post-war inspired colorful sets are
just as desirable with operators and collectors today as they were five decades ago, and I expect
that my set will still be running five decades from now. Until then, the colors of the lights,
the smell of the smoke, and the sound of the mighty electronic sound of steam will once again
grease my railroad and stir up memories of layouts long ago. As always, I hope you enjoyed
this video as much as I enjoyed making it, and if so, please let your friends and neighbors,
and especially YouTube, know by liking it, sharing, subscribing, or commenting. And don't
forget to check the video description for links to products and videos that I mentioned in this
episode. So keep those strings running, and we'll catch you next time on Toy Train Tips & Tricks!