When it is not possile to make waterslide decals for your project, vinyl sheets cut by a Cricut or similar machine are a viable option. Here's how I made a custom Lionel F3 without using decals!
**As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Custom decorating when decals are not an option on this episode of Toy Train Tips and Tricks.
Hello again, this is Mike with another episode of Toy Train Tips and Tricks.
Many regular viewers are already aware of my shell swapping method for
increasing the size of my locomotive roster without decreasing the balance in my bank account,
at least not significantly. And thus, I came across a battered Lionel Postwar F3 shell that
was originally decorated for Santa Fe, but a previous owner had added racing flames,
a flying tiger style shark's mouth, and other modifications. So rest assured,
I did not destroy a precious collectible. So I wanted to customize the shell, but what scheme
to choose? I had already done a Penn Central unit, similar to one I recalled seeing at
Sharonville Yard as a child. For this, I used decals from K4 Decals. This time, I wanted to
recreate another childhood memory. After the formation of Chessie's system, many Western
Maryland diesels began to freely roam away from home and onto C&O and B&O rails, and my favorites
were of course their stable of F7s. And while I did like Western Maryland's red, white, and black
circus colors on EMD hood units, to me this scheme just didn't look right on the F7s. Kind of like a
road construction worker in a blue polyester leisure suit. No, these F7s were hard working
units, and the understated black with yellow made the perfect working man statement. Nothing fancy
here, just get the job done. Of course, it also helps that the black with yellow lettering is
much easier to paint, but decorating is another matter. I was able to find O scale decals for the
black lettering of Western Maryland's circus colors, but not the yellow speed lettering of
the black scheme. So what about making my own decals with my inkjet printer? Commercially
produced decals are screen printed so the inks are thick enough so as to be opaque even against
a dark background. But inkjet or laser inks are not thick, and the dark background bleeds through
the ink so that the lettering is barely visible, if visible at all. Instead of clear decal paper,
what about white decal paper? Well the problem here is matching the background color to the
paint color, especially when the background is black. The black color of my inkjet is really
more of a charcoal gray, so that doesn't work either. So that leads us to vinyl. Vinyl? Yes,
with the assistance of a Cricut or other cutting machine, lettering and logos can be cut out in
vinyl and applied to a model. I've done this before with white lettering for my fantasy railroad,
so why not yellow for a real prototype? I'd like to pause a moment and ask that if you're enjoying
the video so far, please like the video and subscribe to the channel so YouTube knows that
you like this kind of content. Feel free to comment if you have your own alternate methods
of decoration. Oh, and if you want to know about weekly new product releases of O'Gage trains,
books, and more, follow the link at the end of this video to the new What's New in O'Gage channel,
subscribe, and hit the notification bell so that you never miss an update. Now back to the video.
The next problem is matching the font for the lettering. Western Maryland speed lettering does
not match any font in my computer system, but extra railroad fonts are available online.
RailFonts.com offers more than 50 railroad font options for download. There is a small fee, but
the cost is generally less than a professional decal sheet, and you can use them forever after
purchase. Another option is at RailSimStuff.com. Here is a smaller collection of fonts, but they
also include railroad logos, and they're free. Yes, free of charge, but donations are welcome.
And it is here where I found a perfect Western Maryland font, including the Western Maryland
winged logo, radio equipped lettering, plus a few select B&O and C&O fonts and logos as well.
On a Windows machine, simply download the zip file containing the font, then extract the zip,
and find the file in TTF format. Click to save the font onto your system. I also recommend printing
out the PDF file that shows the font layout and the key combinations to create certain logos and
effects. Now that the font is on your computer, go to the design program for Cricut or whichever
cutting machine you're using. Start a new project and open a text box. On the Cricut machine, there
is an option to use special Cricut fonts or system fonts, those that are already on your computer.
Select system fonts and scroll down to find your new railroad font. Then design your text, numbers,
and logos as you would with any graphic software. I used several reference photos to determine not
only what lettering was needed, but what size and where the lettering should go by observing the
location of the lettering compared to various landmarks on the locomotive. Then measuring the
identical area on the model. You may have to adjust the letter spacing or height to get it just right.
Now it's time to cut the design. Select a vinyl that closely matches your desired color.
I think this yellow was a shade too bright for western Maryland, but it's close enough for a
three-rail model, right? Also, don't be cheap here. The cheapo dollar store vinyl will work for many
projects, but it doesn't do well with small intricate designs. Go ahead and pay for the name
brand stuff. After all, you can get many projects out of a single roll of vinyl. I have also found
it best on small designs to increase the blade pressure. On the Cricut machine, you can select
custom tools. Then in the settings, you can redefine the blade pressure for a specific product.
I increase the pressure about 20% for my design, but your results may vary depending on your
machine and the vinyl brand. Then press go and relax for a few minutes while the machine cuts
out your designs for you. When it's finished, I use a cutter to make a smooth cut just below my design
and to leave a good edge for the next design I make on the remaining vinyl. Now comes the slow
and frustrating part of preparing the vinyl, weeding. Just like in your garden, weeding is the
process of removing what you don't want in your design and leaving behind what you do want. I use
a combination of tools for this, X-Acto knives, dental picks, and tweezers mainly. There are two
ways to weed a design. Most commonly used is the positive weeding method where excess material is
removed from the vinyl sheet. Then clear transfer tape is used to transfer the completed design
onto the model surface. I tried this method first, but I found that the intricate nature of my design
was not working well with this. After about 20 minutes of work, I only had a W and an E clear,
so I decided to try a different route. In negative weeding, the transfer tape is placed over the
freshly cut but unweeded design. The idea is to pull the transfer tape away from the vinyl,
bringing the cut design with it. This method is still slow, but it worked faster than the positive
method. Be patient, work slowly, and have a fresh X-Acto blade on hand to assist any parts of the
design that want to cling onto that vinyl sheet. You will probably still have to do some minor
weeding on the transfer tape, such as the middle of O's and A's. Sometimes an individual letter or
number will have to be placed on the model individually, as I did with the numbers on one
side of my model, and also the W on one side. Weeding the numbers was by far the most time-consuming
part of the project. If you're making custom designs for your own fantasy railroad, I suggest
selecting a simple sans serif font for the easiest weeding. As each part of the design was ready on
transfer tape, I once again checked my reference photos and then placed the text or design on the
model. If you make a mistake, carefully remove the design with an X-Acto knife and reapply.
Despite their small size, the lightning bolts for the radio equipped symbol cut sharply and weeded
very easily. I thought about including the radio equipped text, but this was simply too small to
and certainly would have been too small to weed. The long stripes also came out cleanly,
but applying them straight was quite a challenge. After everything was applied to my satisfaction,
I applied two coats of dull coat to reduce the sheen and help keep everything in place.
Then, I just needed to unmask my windows, reapply the horns, and reattach the shell to the frame.
So, what are the pros and cons of this method? On the pros, you can do light colors on a dark
background, things you can't do with your own decals. It's inexpensive. It's easily removable
if you make a mistake or want to do a change. It's very durable. It's chemical free. And it's
easily repeatable. Once the design's in your computer, you can use it over and over again
to make a fleet of models if you'd like. The cons are that small or complex designs might be
impossible. It's time consuming. And the vinyl may cover some of the model details.
And it does not completely mold to the surface like paint or decals will.
Having done this project, would I change anything if I did it again? Well, yes. Mainly that all of
the text and designs are too large, particularly the nose herald and the stripes. They're not so
bad that I feel the need to redo the project. As I said before, it's close enough for three rail
trains. But they are too large nevertheless. Part of the issue is that I measured the width
of the designs off the prototype. But the model is both wider and shorter in height than scale.
So the dimensions are off a little bit. So if I did the project over again, I would probably
reduce the size of most of the cuts by about 10%. Still, I count this project as a learning
experience for future projects. And I hope that it inspired you to try some new ideas as well.
As for me, I'm going to put my new, to me, F3 through its paces.
Keep the trains running and we'll catch you next time with more toy train tips and tricks.