I Haven’t Done This In YEARS

Exploring Ancient Crossbows
3 followers
5 Video Views·Mar 3, 2026
I Haven’t Done This In YEARS
AI Generated·May contain errors
Comments are disabled for this video.
What's up everyone?
In today's video, we are gonna be unboxing an HHA site.
I'm really excited about doing this.
We're also gonna switch it up.
We're gonna do it on this bench.
Always need that light on.
Shop's kind of been a mess lately.
I've been trying to get, I've been setting up bows,
I've been messing around with things.
I actually have already messed around
with an HHA a little bit.
I've been messing around with spot hogs.
I've really just been messing around
with sites in general.
So this is a good time to do a Lancaster unboxing on it.
Oh, Tetra Max HHA.
I thought this was a completely different one.
So I'm excited to try this one out.
I thought it was gonna be a single pin.
Well, here we have a four pin.
So, let's see here.
This is the Tetra Max TMX4510,
if you're looking for the skew.
Looks like they have a bunch of different options here.
New infinite adjust plate.
Allows for independent elevation and second axis adjustment.
Which it looks like is this little plate thing right there.
Wow!
That is how to not open this.
Wow, great one.
Nice work.
There's one thing I'm good at.
It's about breaking things and opening them
and not how they're supposed to be opened.
So it looks like this is the main hardware.
We have the sight bracket.
This is not the dovetail version.
I think it can be the dovetail version.
This is the dovetail version.
So I think it looks like to me that those are the same
and you can interchange like a dovetail.
Interchange like a dovetail and the actual bracket.
But we're gonna stick with this
because this is what Lancaster sent me.
Looks like we have a bunch of instructions.
Don't need instructions.
Oh, we got a bunch of cool stickers
and we have a bunch of sight tapes.
52 computer generated tapes, three setup tapes,
three blank writable tapes, three clear Mylar tapes.
I don't know what that is.
A lot of tapes.
It also looks like we have a different ring here,
which I'll talk about later.
Then we have some just accessories.
We also have a little different indicator pointer,
which I'll talk about later too.
So to install this, we need some Allen wrenches.
We have to first loosen this bracket right here
to allow it to slip onto the main mounting bracket.
So we loosen that and that basically just shifts down
so you can then just slip it on.
I actually really like how that slips on
nice and easy with it.
It's actually really easy to swap out.
If you wanted to put a different scope or sight on,
pause, like you could put one of these on,
slip it right on, in and out.
This is something that is new
that will be available soon,
but you can slip it on to any of your HHAs
with this new bracket.
So we're just gonna lock this down.
You kind of have to pick your position.
It's kind of nice.
They have all these markings
and this is just your elevation.
So what we're gonna do is set it up
for the optimal position,
which is optimally for your entire sight tape.
So we're at like zero yards right now.
So we're gonna make sure that our sight
is on like the higher part of that
instead of the lower part.
Or actually, let's see, we're gonna do,
yeah, we'll do about like that towards the lower part
so we got maximum room on our sight tape.
Tighten these bad boys down.
Two Allen wrenches.
It stays pretty snug.
And then you also have,
it's like two brackets that come together.
You can also loosen these right here.
Who is this?
Look at Colby.
Look at his profile photo.
Hello.
We're doing an unboxing.
We're talking about the new HHA mount.
How do you feel about that?
No, how do you feel about the new mount
that people can mount UV3s on the HHA?
It is sick.
All right, cut it, cut it.
Okay, there we are.
We have it bolted on.
One thing that I will like to do
is I like to swap out this little glass piece.
This is basically a magnifier to see your tape mark,
but it kind of can get distorted
if you kind of tip it like this.
I don't know if, can you get on that good?
If you kind of tip it, you can see that
it kind of gets distorted.
So anyways, that can be easily solved
by this included little indicator.
You can swap it out.
And maybe, you know, you might like
this little glass magnifier thing,
like if it's your deal, that's totally fine.
But all you do, loosen this Allen wrench,
loosen the sight tape.
I don't even know what this is called.
It's like a barrel.
But all you do is loosen that, and that comes right off.
And this is actually a feature
that I didn't know about HHAs, but I really like it,
is this can come off,
and you can have different sight tapes.
Like I could have a sight tape on here,
I could have a sight tape on here
for different arrows or different bows,
and I can swap them in and out.
I didn't know that, and I was messing around with that,
and I was like, oh, that's actually kind of dope.
So anyways, take this out.
Then what you do is you take this,
loosen that more, take this glass piece out,
and then you put in this little indicator.
It's just like a little pin,
but the little pin is a little bit more exact and tactful
to the actual yardage.
So now let's put the setup tape back on.
And what's also nice about this
is let's say you're like off a yard,
like your entire sight tape is off one full yard.
You can just loosen this and kind of just dial it right in
to whatever yardage you want it at.
And there's a nice little O-ring,
little rubber O-ring in there.
So when you put it on, it's kind of a snug fit,
and it has a good flow to it.
So changing your yardage on a setup level is really nice.
And all you do is tighten this back down.
I think you just kind of want that snug.
You don't want to go crazy on it.
And there we go, it's back into place.
So our four pins are adjusted right here.
You just have four individual Allens.
And when you break them loose,
when you loosen this, it becomes just break-free.
There's no micro-click adjustment.
So you loosen it,
and then you just kind of tighten it back down.
Not the end of the world,
and it is pretty smooth up and down.
And there is a little line adjustment you can see
right there that you can kind of mark where you're at.
You just got to be really careful
because if you break it loose
and then it like falls down,
like four clicks on you accidentally,
you just got to keep track of where you are.
One thing that I do like on the HHAs
is there's the front little lock right here
for the left and right adjustment.
So you can micro-adjust with the click
left and right adjustment all you want,
but it has this cool, like big left and right adjustment.
Loosen this,
and then you just kind of bump it left and right.
Let me loosen this one more.
There's little dimples on this backside,
and you just find them.
There's little dimples right here,
so you can macro-adjust left and right if need be
just by pushing it.
You loosen it and just push it.
And on one of their other versions,
this or the one I have on my bow,
it's just a lever.
You just loosen it and then boom, boom, boom.
So this is nice that you can just bump it left and right,
tighten it down,
and then you still have your micro-click adjustment.
Okay, we're gonna mount this guy on this bow.
For now, I'm having to excel in.
This was a bow I set up towards the later part
of the hunting season, hunting it with it a little bit.
And this is the V3X with the cut-through sight bridge lock.
So this HHA sight does not do that,
but it still bolts onto the side.
So it just bolts simply right on the side right here,
and it still works, it still fits.
So they do supply you with mounting screws.
So there it is mounted on the bow.
Looks pretty nice, actually.
Bracket looks good.
Looks like you got a little harmonic dampener in there.
This is the same type of dampener system for Matthew,
so it probably does pretty well at dampening some sound.
Now what we're gonna do is we're gonna put it
in the bow press, get our second and third axis lined up.
We were putting it in a much larger
axle-to-axle bow before this.
So I am going to get the bow level with the earth
just by shifting it back and forth
on these pegs a little bit.
Okay, so look right here, this string is level,
essentially the second axis is level.
And the HHA second axis is way off.
So how we're gonna do that is we're gonna,
I think, adjust these two bolts right there.
Yeah, so now we can adjust the second axis just like that.
I'm gonna snug it, it is good to just have them
fairly snug so you can just kinda scooch it a little bit
and it kinda stays in that spot.
Okay, that is good.
My other level on the string is still good.
Boom, we good, or as the young folks will say, we gucci.
That's tight, second axis good, second axis good.
I was just talking about this the other day.
First axis is making sure that the sight bar
is level with the earth.
The second, or level with the string.
The second axis is making sure the scope
is level with the string.
And then third axis is making sure that the scope
is parallel with the sight, like this way.
This is third, this is second.
And then first axis is actually the sight bar,
which on this one, there isn't a way to adjust that,
I think, but on a landslide, on a landslide,
your first axis is this right here, that one and that one.
And this bar sways back and forth, and that's first.
But we don't have to worry about that.
For the third axis, it's actually a kinda cool system,
I've never seen it before.
It's on the actual sight bar, you loosen this top one,
and then all you do is you loosen that set screw then,
and then this is your third.
The whole sight moves, it's just, it's not the scope,
it's the whole sight.
Which is kinda cool, there's a little spring in there,
and you can actually micro-adjust it on the side,
there's a little tiny screw on the side.
So we're gonna rotate our whole bow press down
to get our third axis sighted in.
That little hamstie level is very versatile.
Okay, string's level with the riser, tip it down.
Now our third axis is off, just by a smidgen.
Yeah, this is what I actually really like
about the third axis, is you stick an Allen wrench
in the side, and you just can micro-adjust
by spinning the Allen, you can just get the bubble
right in the view, in the perfect spot.
And that's it, and then you just tighten it down.
Really easy, probably the easiest third axis
on any sight I've ever worked on is this HHA setup.
Tighten set screw, and down big hoss.
Double check, third axis, good.
There we go, we've leveled the sight.
And like I was saying, we could've put it
on my little third axis jig, but I didn't wanna
take it off, put it on there, and put it back on the bow.
So we just did it this way, and we were good to go.
So now I think what I'm gonna do,
we're gonna go outside, we're gonna get sighted
in 20, 30, 40, 50, move the pins around,
see how hard that is, and just see how
the overall shooting experience is.
And side note, these Grim Reaper little broadheads
are actually a big fan of.
That's what I shot my elk with.
That's all I shot with this year.
But they fly really good, and they're really sharp.
Big dogs.
One day, I was really mad because I couldn't find
any tips, and I went out and I just bought
like a couple dozen, so I always have them now.
Just gonna shoot a couple.
Nice.
Okay, let's go outside, and we'll get our 20, 30,
let's see, 20, 30, 40, 50 pins,
and then we will get our sight tape set up on this
so we can shoot 50 yards and on.
I ran this chair over, I ran this chair over
with my truck the other day, it was broken.
Start there.
I think I actually like this four pin.
I've shot a couple pin sights in a lifetime.
But off the bat, I really like this one for some reason.
But we shall see as I shoot it.
Nice.
It's just a smidgen.
Okay, there we are, 20 yards is sighted in.
That works so well if you guys are like in a basement
or shop setting something up.
Getting sighted in at like eight yards,
and then you go to 20, and you're like right on.
So, there's our 20.
Let's back up to 30.
30.
I'm guessing this pin gap is actually gonna be close.
This factory pin gap.
What do you think?
That pin gap.
That's factory.
It'll at least be on the target, right?
Should be.
Hopefully.
Yeah, smidgen low.
So, now what we're gonna have to do
is we're gonna take our Allen wrench,
wherever that is, take our Allen wrench.
Okay, that actually wasn't too bad.
You just gotta be really careful.
You don't wanna break it like all the way loose.
You just wanna keep it snug.
Perfect.
This is gonna be easy.
I thought that was a shed for a second.
I don't even know what that is.
So, right off the bat,
I know I'm gonna have to bump it down a little bit,
so I'm just gonna do that first.
That's not bad.
And simplicity in my books,
I'm dropping everything.
Simplicity in my books wins every time.
So, the fact that this doesn't have extra parts
and extra gear and extra thread
actually isn't terrible.
So, a little left.
So, we're gonna do our left adjustment.
So, to get this sight set up,
you definitely wanna set up Allen wrenches on you
when you're shooting on the range
because it operates fully on Allen wrenches.
There's no locking levers or anything.
So, definitely want a pair of Allens.
Nice.
That's a tight group down there for sighting in.
I don't think I ever left the white.
If I did, it's just by a little bit.
Advantages and disadvantages of multi-pin, single pins.
Single pin, I've talked about it before,
but you can get the exact distance.
And if you get a double pin in the single pin,
you at least have a backup.
If the artich changes on you,
the animal moves a little bit.
Multiple pin, it's nice because you can shoot 20 to 50
on a whim without changing anything,
but you have to gap shoot.
So, you can't be, per se, 100% precise.
You're doing a little bit of guessing from 20 to 25
or 45 to 50, 50, the 10-yard gap between each pin,
essentially.
So, pros and cons to everything,
but isn't that pros and cons of life?
Everything.
Okay.
Not bad.
Couple of those times was when I just had to bump it
just a little bit.
So, we're set up.
We just gotta get our 50-yard pin.
And then we gotta get our sight tape.
That'll be good.
All right, let's see where we're at.
51, 50 and change, I guess.
So, I'm gonna move my pin again.
I know it's gonna be off.
I'm essentially just eyeballing the gaps.
False.
Let's try that.
20, 30, 40, 50 is how I'm setting my pins up.
You could have done 20, 25, 30, 35.
But with the speeds I'm doing and everything,
it's really not that much of a gap between the pins.
Low and to the left still.
So, we gotta do two adjustments.
As you go farther in distance,
your left and right show more.
If there's no tuning issues,
I could have some tuning issues going on,
but for the meantime,
I'm just gonna call it a sight issue.
Close.
We were like four inches low,
now we're like an inch low.
Make it one more adjustment and we'll be there.
See how that is.
Still low.
Think I didn't move it enough at all last time.
I was just thinking,
I really haven't shot one of these,
like a pin sight in years.
Like it's gotta be four or five years.
That one might have been me
because I was looking at my arrows.
Okay, that one's in the dot.
Okay, 20, 30, 40, 50 pins set up.
So now what we're gonna do,
we're gonna set up the sight tape.
HHA actually makes it really easy.
We have our 20 pin and we have our setup tape set to zero.
And all I did was loosen that set screw
I talked about earlier,
moved it to the zero position.
And now what we're gonna do
is we're going to sight in at 60 yards
aiming with our top pin.
But we're gonna actually move our dial this time.
So how are we gonna do this?
I'm gonna guess.
Typically I miss when I do this.
Bino harness.
Is it?
It's in one of my pockets.
Is it?
Do you see it?
I think you sworn you dropped it in your bino harness.
Did I set it on the bench in there where it wouldn't say?
Great, maybe I did.
Standby.
Okay, we're back, we got a release.
I like used a reference on the ground
and where my 20 was
and then I moved my 50 there
and then I went a little bit more.
Math.
Pro tip.
So use my 20, this might go low.
Oh, buddy, look at that.
Just off.
Pro tip.
Okay, so let me double check.
That was low.
I'm right though.
I think these HHA clicks are actually
a little bit more of an adjustment per click than XL.
Okay, right in the bottom of the dot.
That was a really good shot.
So going to just bump that down a touch.
Basically we're using our top 20 pin
as if it was a 20 pin slider.
That's how we're getting our sight tape set up.
Here we go.
Okay, so let's see.
That was a touch low still, right in the bottom of the white
so I'm gonna move it.
So now you can see that my pin is landing on,
what is that, 47?
So it's landing on 47.
So now we're gonna go in
and there is going to be a sight tape labeled number 47
and we are gonna stick it on here
and we're gonna line up our current pin,
where our pin at,
where our pin is at with the 60 yard mark
and the rest of our sight tape's good.
Okay, so I'm going to move,
we have number 47 sight tape
but I'm gonna move this back to zero
and then what I'm going to do,
I'm gonna take this off.
So that was my setup wheel.
I'm going to put this new one on this wheel.
Doesn't matter where I put it.
And then when I know my sight was at the zero,
which is my 20 yard mark for my top pin,
we'll tighten that down and we are set.
So right now, our pins are 20, 30, 40
and then our sight pin,
or our sight deal,
our sight slider, gosh,
we'll use our bottom pin as a slider.
Now, using this,
we want to go to 55 and the bottom pin is now 55.
60, if we want to shoot 100,
bottom pin's now 100.
That's what it is.
And if we wanted the top pin to shoot 30,
or the bottom pin to shoot 30,
we can do that too.
But where all of the pins are set up correctly,
20, 30, 40, 50,
the indicator has to be set to 50.
Nice.
Well, hope you guys enjoyed.
We'll catch you in the next one.
