Way back in January 2021 and 175 Episodes ago, I first talked about how I was using my then-new Creality Ender 3 printer to make various parts, models, and structures for my Lionel O gauge train layout. Well, four years have now passed, which is an eternity when you’re talking about technology, and I’ve just replaced my old Ender 3 with a new printer. So, what’s new with 3D printers and their accessories, and if you have not tried this tech for your model railroad, is 2025 the year you should give it a try?
**As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
3D printing in toy trains in 2025 on this episode of Toy Train Tips and Tricks.
Hello again, this is Mike with another episode of Toy Train Tips and Tricks.
Way back in January 2021, and 175 episodes ago, I first talked about how I was using my
then-new Creality Ender-3 printer to make various parts, models, and structures for my layout.
Well, four years have passed, which is an eternity if you're talking about technology,
and I've just replaced my old Ender-3 with a new printer.
So what's new with 3D printers and their accessories? And if you have not tried this
tech for your railroad, is 2025 the year you should give it a try?
Back in 2021, I was just getting started with this whole YouTube thingy, and I was in a different
home working on a different layout, and I decided to take a plunge into the world of 3D printing.
After reading numerous reviews and watching countless YouTube videos,
I selected the Creality Ender-3 printer because of its under $200 price point,
its comparative ease of use, and because it was open source, which meant that if I decided to
try out fancy new accessories and upgrades, they would largely be interchangeable with the Creality
machine. The machine came in a kit that required quite a bit of careful assembly,
needing to ensure that the parts were assembled squarely and securely,
rollers and belts were installed tightly, but not too tightly, the extruder, the bowden tube,
and the hotend were properly installed, and all of the wires were attached in all the right places.
A process that took me about two hours or so. Then came the process of dialing in the machine
settings, leveling the print bed, and making sure the bed was the correct distance from the print
nozzle by checking the spacing with a piece of paper, and so on. With the help of a few handy
troubleshooting YouTube videos, I made my first successful print on day two. But then, many videos
recommended that the first prints to make on the Ender-3 were parts for the Ender-3, parts to
correct some of the design flaws that Creality had overlooked in creating its budget machine.
By the time I finished printing the first round of fan housing covers, LED display housings,
strain relief chains, and lots and lots of wiring clips,
I was ready to finally step out into making parts for my railroad.
Fast forward to 2025. After four years of replacing worn out parts and making various upgrades,
I decided that I had taken the Ender-3 as far as it could go. I was still looking for a budget
machine that was faster than the Ender-3, and that had new and more user-friendly features.
Again, I read and watched various reviews and head-to-head machine comparisons,
and finally, I decided to go with this. The Ender-3 V3 SE.
Well, what? Isn't it like upgrading from a 2020 Nissan Sentra to a 2025 Nissan Sentra?
I mean, what's the difference? Well, in this case, there are worlds of differences between
these machines. First, before I go further, be aware that Creality makes a lot of different
machines that are called Ender-3s, including the original Ender-3, which is still surprisingly in
production, and all of them have very different features and price points. So, the features I'm
talking about only apply to the Ender-3 V3 SE model. The first difference is obvious when you
open the box. Instead of an assortment of metal beams and electronic parts, there are now just
two sub-assemblies and ten screws. Once you remove the box contents, simply screw the two
and use the last two screws to attach the strain relief bar to the nice, neat ribbon cable. No need
to print additional cable chains or clips on this one. Everything is pre-installed. The rollers,
the belts, the drive screws, the extruder, the hot end assembly. It's all done for you. All that's
left is to select the proper input current for the power supply, which is 115 volts here in the good
old USA. Plug it in and you're ready to go. This took me about 15 minutes. It might have gone even
faster if I wasn't filming the process. Once the printer is on, select your language on the LCD
screen. Then, the first time the machine boots up, it will run through a self-leveling operation.
No more turning the adjustment knobs and checking the height with a piece of paper.
This machine checks the bed height at 16 different locations and adjusts everything automatically.
There aren't even any bed springs to wear out and replace because this machine rests on rails
instead of the wobbly belt system of the original. So then you're ready to print. But what to print?
I'd like to pause a moment and ask that if you're enjoying the video so far, please like the video,
subscribe to the channel, and leave a comment about your 3D printing experiences.
Also, please consider financially supporting the work of the channel with a membership.
Members have exclusive access to additional video content,
photos, shoutouts, and more. And a big thank you to those who have already joined.
Your support helps me help you keep the trains running. Now, back to the video.
First, you need a model. Over the past four years, the availability of pre-designed models has
exploded. There are literally dozens of web pages from which you can download free or sometimes
highly detailed models for price. There are even at least two different search engines that will
help you find the model you're looking for. My personal favorites are Yeggi and Thangs.
Let's say I need a replacement missile for my Lionel Minuteman car. So I go to Yeggi and I
select free in the options because I'm cheap. And I type Lionel Missile in the search box.
There I find three options. Actually, they're all the same model posted to three different
free download sites. I select the one on Thingiverse and check to make sure that it's
the model that I want. Then I download it to my hard drive. Oh, and be aware that these sites
usually offer more than just models for the common FDM or fused deposition modeling type 3D printers.
There are also models that work better or sometimes exclusively with resin type printers.
These printers can produce very highly detailed models, but they're a bit more expensive and
there's the need to handle chemicals. Since they're so different, I'm not dealing with them
in this video. Just be aware that some of the models you might see may require significant
modification in order to print on a standard 3D printer. So I found my model, but I'm not ready
to print yet. First, I need to run the model through a slicer program. A slicer takes the
model and creates a set of instructions for the printer to use to make my model. Where to place
the print head on the base, how hot to make the plastic, how hot to make the print bed, and so on.
There are many good slicers out there and most are free. Creality has a free slicer with download
instructions on the included flash drive and there's nothing wrong with using it. Ultimaker
Cura is used by most 3D hobbyists as it's free and open source with a large community of users
designing and sharing new features and updates. I've been using Cura for years and I prefer its
interface and the ability to fine-tune the printing options. And the latest update for
Cura includes a profile for the Ender-3 V3 SE. So I can simply select it and the slicer knows the
basic parameters and baseline print settings for my machine. So I open Cura, then open the file
for my missile from the hard drive. I check the settings such as temperature and speed.
Uh-oh these red areas need support or the plastic will just fall to the print bed ruining the model.
This is one of those things you need to think about with FDM printers but not so much with
resin printers. I need to generate support for these overhang areas so I select generate support.
Also since the model is tall and thin there's a risk that it might fall over during printing
so I'm going to add a raft to help it stick to the print bed better.
That's under the print bed adhesion settings. When I'm satisfied with the settings I hit slice
and then I can save the file to an SD card to transfer it to the printer or if I wish I can
connect my computer to the printer directly using a USB type-c cable and then print the model
directly from the Cura slicer. All I have to do now is load the filament into the machine which
in this case is PLA the cheapest and most common printer filament and then press print. The machine
does the rest for me. A few hours later voila a new missile for my launchers. I just need to do
a little filing on the rough edges and it's ready for launch. And that's the best difference between
this machine and my old Ender 3. The V3 SE can print models three to five times faster than the
old machine with equal or even better quality. On the old machine this missile would have been an
overnight print rather than just a few hours. What else could I make? Remember that Menards covered
hopper with the missing discharge tube? I designed a basic replacement using a simple modeling program
called Tinkercad. There are dozens of great free and low cost modeling and CAD design programs
available so it's a matter of choosing what's most intuitive for you. Tinkercad is not a true CAD
program but it's literally so easy to use a child can use it. In fact it's used by many elementary
school students across America and adult hobbyists as well. It works by adding or subtracting basic
geometric shapes to create a model. And I find that it works quite well for most of my train
related designs. In this case all I need is a long cylinder with two slightly larger caps on the end.
I used calipers to measure the original model and created the necessary design.
Then I downloaded the finished project as an STL file for Cura to slice. On my printer this model
was finished in about 15 minutes. How about my Lionel RS3 with the broken handrails? For this
I used a mix of both processes. I found a design for Jeep 38 handrails on Thingiverse. I printed a
test version and found that the overall dimensions were spot on for my needs. I loaded the design
into Tinkercad and then I made the handrails thicker to better match the existing Lionel handrails.
I added a flat plate along the bottom for mounting the handrails to the model. It took about 15
minutes for each set to print. I just needed to add some black paint and then glue them in place.
My model is as good as new. Here's another example. This Mark's Work Caboose came in an
assortment of stuff I just purchased, but the cab is missing. Searching through Yegi,
I found a neat HO scale model for a work caboose with a bay window. Quite unique,
but it's an HO scale. How could I make this work? I loaded the HO model into Tinkercad,
then checking the measurements of the Mark's flat car, I adjusted the width of the model.
I measured the height of a Mark's Cupula style caboose and adjusted the height accordingly.
Then I measured the original glue marks on the Mark's model to determine the length of the cab.
I made a few tweaks to make this smokestack more Mark's like, and I checked the fit of the roof,
then it was ready to download and print. And here it is. A little sanding on some rough edges was
necessary, but otherwise, just a coat of paint and glue it in place, and now I have a unique
Mark's Work Caboose. And that's just a sampling of what I've printed in the first three days of
assembling and running my new Ender 3 V3 SE. Oh, and links to the models I printed can be found in
the description on this video. The art of 3D printing has advanced amazingly since 2020.
Today's entry-level machines like mine now include features that were only available
in expensive industrial grade machines just five years ago, if they were available at all,
even at that time. The learning curve for entry into the 3D printing world has all but vanished.
Machine maintenance has decreased exponentially, with automatic bed leveling, automatic z-axis
adjustment, and other improvements. Printer speeds are now amazing. The slow back-and-forth
motion of older machines has been replaced by the zip-zip of newer, faster printheads.
And while they're faster, they're also more precise as the stability of the machines has
improved too. Even the noise level has been significantly reduced, with the loudest part
of these new printers being the cooling fan, rather than the whine of the stepper motors like before.
And the price? Well, the original Ender 3 is still priced where it was in December 2020,
at around $180 retail. So how much more is this new, improved version? As of the publishing of
this video, the Ender 3 V3 SE is listed at $229, but I've seen them occasionally on sale for under
$200, for a more reliable, easier to use, faster, and higher quality machine.
As for 3D printing accessories, the selection of printable filaments has also expanded with
new materials for different applications, to flexible filaments, and even some embedded
with wood, stone, or metal for various custom looks. Even the selection of basic PLA filament
has expanded with the addition of various Plus, Pro, and Matte finishes, all for about the same
price as five years ago. By the way, don't skimp on the filament. It may be tempting to save four
or five dollars on a spool, but cheaper filaments often have issues with clogging, tangling, breaking,
or inconsistent finishes, creating more waste, and ultimately more expensive printing.
So if you've ever considered making custom rolling stock, structures, or vehicles for your model
railroad, or you have the need to fabricate new parts to keep older models running, there's never
been a better time to take the plunge into 3D printing. There are more pre-designed models
available than ever, mostly free of charge. Design software continues to become more user-friendly,
and today's printers have advanced so far as to be practically hassle-free.
On a final note, you've probably noticed that I have an enclosure for my printer.
This is a completely optional feature, but one I find useful. It nearly eliminates what little noise
this new machine generates, it keeps the dust and debris from other workshop projects
away from the printer, and it helps maintain a consistent temperature and humidity in the print
area, especially during those cold winter months in the unfinished basement. I think I paid around
$50 for my enclosure, and it has done a great job for me. As for me, I need to get busy designing
and printing new couplers for some of the Junker Marx cars I just bought. This just might turn
into a future video. So keep the trains running, and we'll catch you next time with more toy train
tips and tricks.