Downstream processing: separation of particles via filtration, centrifugation, and flocculation

Down Stream
6 followers
5 Video Views·Mar 1, 2026
The purpose of the downstream processing in the pharmaceutical industry is to isolate, purify and concentrate the molecule of interest from a complicated bulk matrix. Moreover, it can also involve packaging, distribution, and quality control strategies to optimise the process and scale up.
In this video we will discuss three different methods (filtration, centrifugation, flocculation and flotation) that are used for separation of particles. The video will mainly focus on the initial steps in the process, including initial recovery and clarification.
Welcome to the next video in the playlist Downstream Processing in Pharmaceutical Chemistry.
The video of today will focus on the separation of the particles.
So once that, that would be like the initial step where you start to harvest the material and where the clarification happens.
And I will mainly focus on three different techniques that you can use.
Now, if we look at the primary recovery step,
the first thing we want to do is we want to separate the whole cell from the culture block.
So that means we need to remove the cell debris, we need to remove protein precipitates and other things in order to obtain your product.
And after that, you get the more fine clarification and final purification.
So we'll really focus on the initial steps here that you have to go through.
And the methods that I will be looking at include filtration, centrifugation, flocculation and flotation.
Now, first, have a look at the filtration step.
As you know, this is a mechanical operation.
So one of the key things you have to bear in mind is that you have to consider the cell viability,
because that can be hampered by whatever technique you chose to do.
Now, filtration, and the same applies to these other techniques, usually doesn't come on its own.
It's usually not just one step.
It can be used in combination of centrifugation or other methods.
And here, at first, I will focus on depth filtration, which is commonly used.
And I'll explain to you why that's the case, why that's like the first initial step to start with.
So this is a porous filtration method where your particles are retained throughout the depth of the medium.
So we're not just talking about the surface.
And contrary to, for instance, membrane filters, these filters, they don't have a defined pore size and structure.
Now, why this is really good?
Because you keep it throughout the depth of the medium, so you can have very high throughput,
and you can also cope with a high load of particles.
So that makes it really beneficial to filter out the preliminary things that you want to look at.
And then, obviously, key parameters you will be looking at include the area that you've got, the flow at which you do it,
but also the viscosity of the medium.
So this also depends on the particle load.
Now, as mentioned before, with depth filtration, you can handle very large process volumes and very high cell density.
And particularly in the last couple of years, you will see that the cell density just keeps on increasing and increasing,
because, obviously, that will make it more cost-effective.
So this really handles fast separation.
It's relatively low cost, and it's also a scalable technology, which is very important if you look at large scale.
Now, here you can have a quick look of what, in general, such a train of operations would look like.
So you'll see there's multiple options here.
And here, this really comes across, as I said, where we're not just looking at one particular filtration
or one method to remove the particles.
It's usually a cascade of different things.
So many options, and you can see that this depth filtration, often with multi-layers,
so you can filter out different things, combined with centrifugation is a good option.
Now, sterility also has to be considered.
And then, at the end, you see cross-flow, which is something that we'll come back to later.
So many different options, and I just wanted to show this because it really illustrates
why one single method is not good enough to just separate out the whole system.
But, obviously, filtration doesn't just come on its own.
There's lots of other techniques that we can have a look at.
And here you can also see this cross-flow filtration, which you usually see at the end.
So, as mentioned, depth filtration or centrifugation often starts at the beginning of the process.
Because you can handle these large volumes.
But there's obviously other filtration methods that you can use.
So, I mentioned the differences here is that, unlike in membrane filtration,
you look at the depth of the material.
But, obviously, we can also look at the surface and apply membrane filtration.
Another option to consider, and I mentioned before cell viability is really key,
are, for instance, spill filters, which can actually handle shear sensitive cells.
So, that's another good alternative to consider for certain mammalian systems.
Now, the one thing which you saw at the end was a cross-flow filtration,
but nowadays we're calling it conjunctional flow filtration,
which, if you look at the picture, you can see that the feedstain goes like this,
and then it flows this way.
So, unlike where you have dead-end filtration, where all the flow goes through,
and then you start to get blocking at the pores.
So, really, when you cross-flow it, you minimize the fouling of the membrane,
which is very beneficial.
Now, there are obviously some key challenges that come with this,
and you will see this cross-flow you usually see towards the end of these filtration steps
rather than at the beginning, which relate to,
and I think this applies for a lot of these other methods of shear sensitivity,
but also the lifetime challenge of these membranes.
So, how long before your filter starts clogging?
So, how long before you need to change it?
Now, this image is really just to give you a brief idea of where filtration spans across,
because, obviously, the pore size or the structure that you're looking at
will determine what you can remove from a solution.
So, you can see, for instance, particulate filtration, which is relatively the biggest.
So, here we look at something which is around micron size.
So, this could be, for instance, yeast cells and some bacteria,
or if you think things you can see with the eye, for instance, like sand.
So, that's towards the larger side of the spectrum.
Now, going towards microfiltration, we slowly start to get in the region
where you might be able to filter off viruses,
even though they're probably a little bit smaller than that.
And then the ultrafiltration, which is even smaller.
So, here we start to look more at the nanometer range,
so this would definitely be in the range of viruses, albumins,
or certain proteins that you can reduce.
And then, even smaller, we can look at nanofiltration,
which is for the removal of certain sugars, for instance.
And then, finally, also reverse osmosis, if you can look at ions.
So, when looking at this filtration, you can span a whole range,
and depending on what you want to filter and which step,
you need to look at adapting the size of whatever filter you're using.
Now, having looked at filtration,
another thing that's recently been more and more used is centrifugation.
So, here, rather than relying on gravity,
you're using centrifugal force used for separation of mixtures.
So, if you have a look here, you can see that the heavier objects,
they move away from the axis, whereas the smaller ones,
the lighter ones, they move towards the middle.
So, basically, it's a good way to separate based on the weight.
And you can separate, for instance, bacteria from proteins.
But, bearing in mind, when you do this,
and I would say that centrifugation is becoming more and more popular,
because it's more cost-effective,
because, obviously, you use additional force to separate things out.
But it is more costly than nanofiltration.
When you use a centrifugal force, you do increase the temperature.
So, again, for cells that are shear sensitive,
also maybe the temperature,
they wouldn't like to have the temperature increase when you have these forces.
And then the final thing is, and this also relates to the filtration,
there needs to be some kind of difference between what you want to separate out.
So, if you have two things that are relatively similar in size and similar in weight,
then centrifugation might not be the best option.
So, there needs to be a very specific difference.
None of these two actually work.
We'll come back to another method.
It's called flocculation and flotation.
And this is used for the separation of small particles.
Now, with small, I mean when there's not a big difference,
so you can't, for instance, use centrifugation,
or a filtration that you're not exactly in the range that you need to filter out.
So, what you then need to do, you need to add something to it
in order to get a critical mass in order to separate that.
And so, in flocculation, you do this.
We're dealing with a liquid here, and it comes out as flocs, or as flakes.
And then you form this mass by the presence,
or you basically add something else.
So, this could be inorganic salts or organic polyelectrolytes.
Now, this has got to do with the liquid.
If we talk about flotation, you can imagine something that floats to the surface.
So, here you would sparge with a gas.
So, you have cells that would absorb, for instance, to these bubbles,
and then they would raise to the surface as a floam,
and they would start to float.
So, very similar to the first method,
but obviously the big difference is here that one is like a liquid,
and by the other one you inject a gas.
You form foam.
So, with the last method,
you do have to take care that you have stability within the foam.
So, you need compounds like nitrous fatty acids or amines
to promote the stability of the foam.
And like the previous technique, this doesn't come on its own either.
So, here you will see a certain example.
So, for instance, this is quite often used in wastewater treatment.
So, you have some water, you add some coagulant,
and then you will see this flocculation process.
You start to see these flakes that are starting to form.
Now, obviously, you need something after that to remove these flakes.
So, you probably still need a filtration step,
and in this case, you show membrane flotation in order to filter out the floc.
So, it's always a combination of different things.
Now, in summary, what should you have learned from this?
Mainly, I've discussed three methods for separation of particles
that happen very early in the downstream processing steps,
so in the recovery step and some of the verification.
So, it will enable you to take out some of your product,
but it wouldn't be fully purified yet.
And I've shown to you that you're not just using one method.
Often, these are used in combination.
When would you want to use these methods?
Now, filtration, especially depth filtration,
is very common as a first step for the clarification.
It's relatively easy to use.
It's very scalable, and as I've shown to you,
it can be used so you can tailor it to remove a range of particles.
Now, centrifugation has a higher equipment cost,
but you will see over the last couple of years,
it has been an increase in popularity
because it's very fast because you use centrifugal forces,
so it can be more cost-effective.
And relatively speaking, you can also use small equipment for it,
so it can be very beneficial when you look at things like the footprint of a plant.
Now, when both these techniques don't work
because you don't have a critical mass as such,
so you can't easily separate based on the size,
then you would need to use techniques such as population and flotation.
So, you would then add something to it,
and I've shown to you it can be a coagulant,
but you can also sparge with something,
and you form particles, and these particles can then be removed afterwards.
So, hopefully this video has given you a very brief insight
into how these techniques actually work.
And later on in this playlist,
you will see where we go more in-depth into purification,
and you will also see more case studies
to understand how this downstream processing really works in pharmaceutical industry.
Thanks for watching.
