Downstream processing in the pharmaceutical industry (Part I): recovery and purification

Down Stream
6 followers
3 Video Views·Apr 28, 2026
Biopharmaceutical downstream processing refers to the recovery and purification of a molecule of interest from host cells (for instance, engineered E. coli). It is typically defined as the set of unit operations that follow the completion of cell growth in a bioreactor and subsequent harvesting.
In this new playlist, I'm going to focus on different aspects of bioprocessing.
So, so far, I've mainly focused on what we see on the left, so that's the upstream process,
where we look at screening of microorganisms and at the actual bioreactor itself.
But then, following the harder thing, when you actually think you've got the project up and running,
there's often a very complicated downstream process where we need to separate, purify,
we need to fill it, package it, and then we might also have to do some sort of control.
But that's what I'll try and focus on in this video, and as you can see, because this is often a very compact process,
one video is just not going to do it. So keep an eye out for more videos in this playlist.
So I briefly mentioned before the main difference between the upstream side and the downstream side of the process.
I mentioned the screening process, the separation of the media, incubation of the bioreactor itself,
that's all controlled upstream. Now, for the downstream side of things,
we can look at the extraction or the recovery process, purification, packaging, and finally, production control.
And in this video, I'm going to focus more on the first couple of steps, which include the recovery and separation of the data.
And a key discrimination is between how your analyte is produced.
So if you're looking at, for instance, a protein, this can be both, like, if you have a microorganism that's engineered to produce it,
it can be extracellular, so it can be produced outside of the actual microorganism.
So what you have to do then is to remove the cells to further process the medium.
Now, where it becomes more complex, and this is actually very common as well,
is that the microorganisms produce intracellularly what you want to have.
And in that case, you need to have an additional step where you need to disrupt the cells,
so basically you need to destroy the cells in order to collect the product from there.
And you can imagine that you do end up with cytoplasm and a lot of debris, so that makes purification definitely more complicated.
Now, let's then look at the basics of the recovery process, which is really the first step.
So imagine what you actually have is millions and millions of cells into a pool of depleted media, a lot of waste products,
and you need to separate only what you need, the protein of interest, from a really complicated matrix.
Now, so depending, as I said, whether you have this intracellular or extracellular production,
you would probably always need to separate the cells from the liquid.
And to make it more complex, in the case of intracellular production,
you need to separate the molecules from the actual host.
So what you then get in the recovery process, you often have a couple of steps,
which might include centrifugation, filtration, which is all to separate the cells from the liquid,
but then you can also have cell disruptors, so like a process where we need to separate the molecules from the hosts.
And there are different ways of doing this, and in the next slide you will see a couple of examples,
which are different between mechanical and non-mechanical processes,
which include, for instance, oxygenification, high pressure, but there's also groups like, for instance, chemical cells.
And here you can see a little bit about these cell disruption methods,
because as you can see, there's lots of different methods in doing this,
and first you need to kind of decide what's the best approach to go.
And this is separated in the left between mechanical and physical,
and the non-mechanical steps, where you look at either using chemicals or enzymatic processes.
And the way to look at this is a mechanical-physical, I think you can imagine that this is a very non-selective way of doing it,
but it is very fast to do, and it's very suitable on a high scale.
So this is probably still the most common approach.
On the other hand, if we look at the chemical processes,
obviously you add chemicals to it, so that can include some toxicity or maybe some contamination,
it might interfere with your biocompatibility, and it's a little bit harder to do on a large scale.
For the enzymes, you have like a slightly softer approach, in the sense that it's more selective, less toxic,
but it does come with additional costs, which you don't get in non-mechanical methods.
And again, both these methods are less suitable for large scale.
So you will see in reality, the mechanical and physical processes are far more common than the other way.
Now, the recovery is then first making sure that you actually have the product that you want to look for,
but then obviously we need to purify it further, because there will be many contaminants in the mixture of your product.
And imagine if you rupture the cells using cell disruptors, you would have cell debris,
you would have, for instance, DNA, cytoplasm, proteins, and then even the buffers that you use,
and you want to use multiple buffers, and they can come with lots of additional material.
So, common steps to do this, and there is no one specific route,
but I'm just going to give you like a couple of ways how you can do it, and which are the most common units.
Now, centrifugation and filtration is often a first step to remove the cells,
and this really depends on the size that you're looking for.
So, if you have like a relatively large mesh size, so a normal kind of pre-filtration,
then that's often to get rid of the cells and the cell debris first too.
Then when you move to smaller pore sizes, then you can look for, for instance, separating out some proteins or something else,
and then you can even go to a different type of auto-filtration, where you can separate even out other chemicals.
If you do this, you would often do it in multiple steps, where in each step you're removing a different artifact.
Another very common approach, which is often used to purify, is chromatography.
Now, in chromatography, you can use very specific interactions to make sure whatever you have,
for instance, you can use a resin or beads within your column to interact with specific compounds.
And here you see an example based on size.
So, you can see this bead, and if you really zoomed into that bead, you can see that it's got very tiny pores on it.
And then looking at how compounds interact with it, some, because they're smaller, can really go through the pores,
and they will take a very long time to elute, whereas the bigger compounds actually can't enter the pores,
so they will be easily eluted.
So, that's definitely a big difference in retention time in different sizes, and that's where size exclusion comes into play.
Now, there are other properties that you can rely on, and bearing in mind that you would probably have to use a catechism
because each of them rely on different properties, and because you have such a complicated mixture,
you probably will need to apply multiple methods.
If we look at the charge of separating between positively and negatively charged compounds,
often ion exchange chromatography is used, but we can also look at how hydrophobic,
so something that is hydrophobic but doesn't like water, or hydrophilic, which is when it does like water,
and compare the interactions.
So, if there's a difference in hydrophilicity between different compounds,
then you can also use that in order to separate out the chromatography.
Now, here we've looked at how you would actually do this in liquids.
So, in liquids, we pass the liquid through, we can filter it off, then we can use these columns.
But in a lot of bioprocesses, we're not dealing with things which are in liquid, but we're interested in gases.
So, look at, for instance, bio-enrichment protection.
So, I also wanted to show you an approach where you'll see not that dissimilar from chromatography,
but of separation of gases using porous materials.
And you have to imagine that if you look at gases, they are much smaller than what we've seen in previous slides.
So, here we have to look at very, very porous materials.
They have very specific cages in there.
And in terms of size, we need to think more angstrom size, which is smaller than nanometers,
so it's 1 times 10 to the minus 10 meters, very small,
which have these sizes which can specifically incorporate different gases and molecules.
And when we look at pressure-stream absorption, or PSA, which is very commonly used,
you would often use porous materials like zeolites that have very specific porosities or specific sizes
that can incorporate different molecules.
Now, imagine that the forces that can bind these molecules need to be weak enough
in order for you to be able to regenerate the system.
And this is obviously called pressure-stream absorption.
So, in this case, we look at a drop in the pressure.
But you can also use a thermal spring or other approaches.
So, imagine something which is like a little sponge.
It can take up some of these gases, but it can also release it under changing circumstances.
And you can keep on repeating that process.
Now, in order to work out under what kind of pressure you have to do,
you can look at the absorption isoferms.
And an example is, for instance, given here for two different zeolites.
Now, what you want to do is you want to make sure that your material has got sufficient selectivity.
So, in order to do this, you want to look at the isoferm,
and you want to pinpoint the pressure where you can see.
And in this case, you will see it absorbs a lot more nitrogen compared to oxygen.
So, you would be interested in removing the nitrogen.
And making sure that you work at a pressure where your selectivity is the best.
And you can compare that, and the ratio between them will give you a certain type of selectivity.
And again, this is something where, if you have more chromatography columns,
you can also have different columns using pressure-stream absorption in a row
in order to make sure that you meet the target that you want.
And often, that's predefined, so you would need to have a look
and actually see what kind of criteria there are to your approach.
So, in order to select at which pressure you need to operate,
you need to have a look at this absorption isoferm, look at the selectivity,
but also see what's feasible.
Because I think you can imagine the higher you go up in pressure,
the more kind of also dangerous in terms of health and safety becomes,
not just gas, but also in terms of oxygen.
So, these are three very common approaches, which I just mentioned.
So, the filtration, types of chromatography, also centrifugation,
and the pressure-stream absorption, which you might come across
when you look at the first steps of the downstream process.
So, we are very interested in developing sensors.
Obviously, I've got to have a slide on sensors.
And we have a whole video on sensors and bioreactors, and multiple videos even.
But I also wanted to briefly kind of pinpoint what the role of sensors are
specifically in this downstream process.
And the first thing you want to know is how do you know from your bioreactor
that you've actually made the product.
So, you can imagine if you're, for instance, producing bio-methane,
you might have some gas chromatography.
But if you work with proteins, et cetera, then you might have some UV detection.
So, usually, when it comes off your reactor, you want to have a first check
that you knew that the product was actually there.
The other important sensors which we come across in the process,
if you're working with filtration and chromatography,
blockage of your columns is a real problem.
So, pressure sensors are definitely really important to pinpoint that
to make sure that you're getting what you need.
Connectivity sensors are also often used because as soon as your buffer comes through,
you can check actually where the material is,
and you can check when it's in the column and when it's coming through.
So, you can pinpoint where it is.
And then at the end of that column, you probably won't have a UV sensor
because that can monitor proteins but also cells, and then you can split it up.
So, at the end of your column, for instance,
you could have a valve going towards the waste if there's nothing in there,
but you could also have a valve to notify when your product comes in there.
And this is more similar to the chromatography process
that you would do yourself in the lab where you would check.
If you do organic chemistry, you do TLC strips where you just quickly check,
does this part actually of the section that contains the product, yes or no,
and then you throw it away to make sure there's nothing in there.
The other sensors are far more typical.
So, you want to look at, for instance, the flow, how fast it's coming through.
The pH is obviously quite important to monitor,
and you might have also some processes that rely on pH to neutralize things
or to get rid of unwanted things, or you might have some washing steps,
so that's quite important.
And we always want to have a look at the temperature as well
to see if there's no certain processes occurring down at the front.
So, I would say, in this case, a pressure sensor is really important
when you work with filtration and chromatography
just to make sure that you don't have any buildup of pressure anywhere
and you don't get any blockage.
So, as I mentioned, this is only a really short video
because we only looked a little bit at the recovery and the purification.
So, in the next videos, I'll walk through more practical examples
so we can focus on a specific process and show you the final steps.
And the final step, then, would be concentrating to obtain the final product,
the quality control of the project,
to whether you do that afterwards using specific sensing technologies,
but also we looked at an approach which is called quality by design
and process analytical technologies
where you have some in-built quality control.
So, better than minding the pharmaceutical industry,
you don't always necessarily have the quality controls all the way around.
And then, finally, there's also the logistics to it
and we'll look at packaging and manufacturing.
So, do have a look at this playlist.
There's only one video in there, but new videos will appear very soon.
Thanks for watching.
