Second-hand Lionel Train sets are a great way to break into the hobby. They are inexpensive and abundant, and in a few easy steps they can be up and running in no time!
**As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
So, you want to get started in Lionel trains...
But the prices of some of today's new starter sets make you kind of nervous.
Is there a less expensive way to give Lionel trains a try?
And what do I need to know in order to get started?
Well, the answer to the first question is YES!
There are lots of older starter sets, such as this one...
Available on the secondary market for well under $100 for everything that you need to get started.
As far as the second part of what do I need to know to get started...
Well, here on this episode of Toy Train Tips and Tricks, we're going to take this set from box to layout.
Hello again! This is Mike with another episode of Toy Train Tips and Tricks.
And this is a Lionel Midnight Flyer set.
This is not a top-of-the-line set by any stretch of the imagination.
But it has everything that you need to get started with your first Lionel train set.
Now, this particular set was made in 1981.
The Midnight Flyer set was a very common set made for several years in the early 80s.
This particular one is a special set that was only sold through Toys R Us stores in 1981.
So, here's a sticker showing that this is the special Toys R Us edition of the set.
There's another sticker on this side.
And there used to be a sticker right here covering up this box car.
Because instead of this box car in the set, there's a special limited edition Toys R Us car that was only available for one year.
Only available in this set, and only available at Toys R Us.
So, even with the added collector value of this set because of the additional car...
Still, for everything box included and shipping, was less than $50 on eBay.
And so, there are lots of beginner sets like this in that price range that can be your first Lionel train.
So, you see that it doesn't take a fortune to get started in Lionel trains if you are willing to start with a basic set and see if it's something that you're going to enjoy.
So, let's open up the box and see what we have.
So, we take the lid off.
And there we have an original cardboard insert so that you can see...
I think that's actually where they kept the box car, not the locomotive.
And here we have the original instructions.
This is also very nice to have.
If you don't have it, don't worry. We're going to go through all of the information that's on here.
But if you do have it, again, it's a good reference to show you what was supposed to be in the set.
And any special instructions regarding your particular set.
Also in this set, well, obviously the original owner had a larger layout because they had a Ricoh station.
That was a really cool station accessory. It was really big.
We have an application to the Lionel Railroaders Club.
Authorized Lionel service stations in 1981. All the places you could go to get your train repaired.
And the original warranty card. I don't think it's still covered by warranty.
And so here we have our locomotive, the tender, the caboose.
Our special Toys R Us boxcar number 9388 from 1981.
Here we have our gondola. We have a couple of gondola canisters.
This one original to the set. This one is actually a post-war version.
These are not hard to replace. And we have our power supply.
So this is pretty much what you need to get started except for track.
Now the transformer or power pack as it's sometimes called,
is the thing that I see swapped out most often with these aftermarket sets.
Things that you find on eBay often do not have the original transformer, the original power pack.
And that can be an issue under some circumstances.
Most three-rail low-gauge trains from 1900 to the early 2000s could run on either AC or DC power,
and they generally would have an AC power supply.
Now in the late 70s and early 80s, Lionel, and Marx did it too in the 1970s at the very end,
but Lionel in particular, in order to reduce costs of some of the starter sets,
made a few sets that were DC powered only.
And this is important because if you take a DC powered only locomotive
and try to power it with AC power, you're going to fry the motor.
Conversely, even though a traditional Lionel AC powered locomotive can also operate on DC power,
most of the DC power packs that came with these DC sets are way too small to operate this older style of motor.
And you can actually burn out the transformer.
Now there are a couple of ways to check whether your power supply is DC to track or AC to track.
So first, if you look at the power supply somewhere on it, it will tell you,
of course your input, that's your household current, your output,
look for the variable voltage, 0 to 18 VDC, 0 to 18 volts DC,
that's your variable voltage that goes to the track, is DC.
Now it also makes AC, but that, as it says, is for the accessories.
AC, track, DC. Same thing here.
We have DC, DC, and AC in the middle, marked accessories.
DC to the track, DC to the track, AC to accessories, lights and things like that.
Versus a AC, which if we look here, we've got our input here and look at our output, 0 to 18 volts AC,
or for the accessory, 12 volts AC.
The other way to know is look for the direction control.
On a DC power supply, the forward and reverse are controlled by a switch.
Because on DC motors, the direction is controlled by the polarity of the output,
which side is positive, which side is negative, which can be changed by sliding this switch.
Same thing here on the Lionel.
We have a sliding switch to control the direction.
On an AC output, the direction, instead of being a sliding switch, this is a simple push button.
All it does is actually interrupt the track power,
which allows the special direction controller, the E-unit in the locomotive,
to cycle to change the direction.
And that's how AC locomotives change direction.
So it is very important to match your transformer with your locomotive.
So how do you know what powers your locomotive?
Is it AC or DC?
Well, any locomotive that's going to operate on AC power has got to have some sort of built-in reverse unit,
because this does not change the direction of an AC powered engine.
So you're going to look for a switch such as this one.
This is what we call our traditional E-unit.
It can be on top of the locomotive or on the bottom.
On older engines, say before the 1990s, it will look like this.
On more modern Lionels, you'll have a regular slide switch like this.
And that controls the direction mechanism.
The reverse mechanism either turns it on or off.
On a DC powered locomotive such as this one, there is no such switch.
Either above or below, there is no switch.
So the direction is controlled by the polarity of the power going to this DC motor.
Now don't be confused.
Just because it has a DC motor does not mean it's a DC powered locomotive.
For example, this has a DC motor, but it has a built-in rectifier so that it can run on AC power.
It can run on DC as well, but it runs best with AC.
That's what it's designed for.
So that's probably the most complicated part of getting a set that you don't know for sure what you have.
Making sure that your locomotive and your power supply match.
In fact, I didn't even know this was in the box.
This is originally in the box, specifically telling you that this locomotive will not run on AC powered track.
Now before I go any further with the trains themselves,
I want to check out this power pack because these are electric trains after all,
and so these electricity supply needs to be good.
This thing was made during the Reagan administration,
so you never know what's happened between then and now.
So let's see if it's actually putting out the power that it's supposed to put out.
So we notice here it's going to be up to up to 18 volts DC.
So I've got my voltmeter here.
Now this doesn't have to be even as fancy as this one.
You can get a cheap voltmeter.
We just want to know how much power is coming out.
And it's not unusual that these are off by a volt or two either way.
We just want it to be in the ballpark of 18 volts.
So let's see what happens.
I'm going to turn the power on.
18 volts. Hey, look at that.
And the power goes off when we turn it off.
Turn it on.
18 volts.
Okay, so now we know that our transformer is putting out the power it's supposed to,
working the way it's supposed to.
Let's make sure the locomotive is doing the same,
because there's no point in putting the rest of the layout together
if we don't have a functioning locomotive.
I'm going to take my alligator clips.
I've got one attached to the center.
I'm going to take this one and attach it to the frame.
Or I could also touch one of the outside rails,
but this makes it easier when I'm stationary like this.
I'm going to turn the power on.
And it works.
And let's try the other direction.
And there we go.
So we know that it works.
By the way, let's turn on here.
Does the headlight work?
Yes, the headlight works too.
All right, so we have a functioning locomotive.
We have a functioning transformer.
Now let's take a look at the rest of the set.
I'm going to check out the wheels and the couplers
and make sure that everything is attached here.
Check the wheels, make sure everything spins freely.
Sometimes in shipping, this can get knocked out of the journal
and it'll not want to function properly.
Now again, this is an inexpensive set.
These are actually plastic wheels,
which is a hallmark of the really, really cheap sets.
Although it is unusual to have in the basic set
to have couplers at each end of the caboose,
although only one is functioning.
Many cabooses are lighted.
This one has a special glow in the dark effect
Let me see if I can get it to show up here on camera.
Turn the lights off.
Just a little bit.
It's hard to see there on the camera,
but the windows do have a glow in the dark effect.
Maybe if I let it charge under the lights a little longer,
it would be more visible.
Now, if you find you have one of these operating couplers
that doesn't want to stay closed,
especially with the train moving,
the quick and easy fix for that is these hair tie rubber bands.
You can find these at, I found these at Dollar Tree,
but Walmart, any of the big commercial box stores like that,
hundreds of them for like $1.50.
And you just take that and you're going to wrap it
around the coupler shaft a couple of times.
And that gives that spring some extra support.
You can still open the coupler,
but it will make it firmer staying closed.
And here again is our special Toys R Us box car.
These were only made in this set in 1981.
There were other Toys R Us cars in other sets for different years.
This is the one for 1981.
And here we have the Short Gondola.
These go back to the Scout sets of the late 1940s.
One operating, one non-operating coupler, plastic wheels.
And again, the canisters were devised to be the loads
or, you know, use something else for a load.
You know, you got young kids, young boys throwing some dinosaurs, some Legos.
Any of that cool stuff works well in a gondola.
Then we get to the tender, which shows some damage.
We've seen, we've had some repair go on here.
And it's important, this is the drawbar.
This side goes with the locomotive.
I guess they added some weight.
Is that what that is?
The tender just slides back together.
Put the long tab to the rear.
There we go.
And now we are back together.
Some tenders had some type of sound system,
whether it was the mechanical or electronic sound of steam.
This one has nothing, mainly because of its size.
Again, this was an inexpensive set.
All of our rolling stock, we've checked the wheels.
We've checked the couplers.
We are in good shape.
So let's talk about track.
Now, if the set you purchased came with the track, great.
Go with whatever you've got.
If it didn't, you have several options.
You can go the traditional route.
Now, the set that I've been showing you
would have come with this stuff.
This is called O27.
It is O gauge, as far as the width of the rails.
But the 27 refers to the half circle of track.
Four pieces, four curved pieces,
make a circle that is 27 inches in diameter.
And this was very common in starter sets
from the 1930s all the way through the early 2000s.
Now, the bad news is that this stuff is no longer made.
The good news is that it was made for like 80 years.
So there is tons of it out there.
Local dealers probably have some.
If you go to a train show, to a swap meet,
a lot of the dealers will have bundles of this,
boxes of this underneath their tables
that they will sell for a really good price.
They sometimes even give it away
because they're just tired of carrying it around.
The next option is what we call regular O,
or we sometimes call it O31,
because the basic curve on that,
four pieces, a semicircle,
is a curve 31 inches instead of 27.
So not only is the curve a little wider,
but you'll also notice that the rail itself is taller.
The ties are taller, the rail is taller,
so it is more durable, and each piece is longer.
Let's compare an O straight to an O27 straight.
This works just fine with the basic starter sets as well.
So if you need to get new track
and you still want that tubular look,
this is a good choice.
Now, this is no longer made by Lionel.
However, Menards, the home improvement chain,
does manufacture regular O track
and curves in a variety of curve diameters,
and these do mate up perfectly with Lionel.
So these are your tubular track options.
And then there are the modern track systems
that have their own integrated roadbed.
This is Real Tracks by MTH.
Lionel offers their own fast track system,
again, with its own built-in roadbed.
Here's a picture of the fast track,
and you see that it does use track pins,
kind of like your standard tubular track,
but it also has the integrated roadbed system.
Any of these track systems will work fine
with your basic train set.
It's a matter of what look you want,
how much you want to spend,
and what you have available.
Now, when you're using tubular track,
well, first of all, you'll want to make sure
that it is not rusty.
It doesn't have to be perfectly clean,
but just relatively shiny.
It doesn't have to have, you know,
fresh-off-the-showroom shine
like these practically new pieces do.
But, you know, especially avoid rust.
Frankly, with the cost of the tubular track,
I find it better just to replace it
if it gets too rusty.
Now, as far as assembling the track,
very simple.
We have our three track pins here.
We have our opening here.
You want to slide it together
as tightly as possible,
and sometimes it takes some wiggle.
Then, you want to make sure
there's good electrical contact,
so I take a pair of end nippers like this.
You can get these just about any hardware store.
I think these were, like, six bucks
at Harbor Freight when I got them.
And I just go over the top,
that little flat spot,
and I just crimp them together
just enough to make sure
I'm getting good electrical contact,
and it also holds the pieces together
pretty securely.
If you're setting up a temporary layout,
you can also take a zip tie
and run it across the ties
and secure it that way.
If for some reason you need to remove
track pins from the end,
these are crimped at the factory,
so they are pretty tight.
So the easiest way that I have found
is turn the piece over,
get a small flat screwdriver,
push it into the slot,
and twist to make that opening bigger,
then come back with either needle nose
or, again, my tool here.
I need to do it a little bit more.
Sometimes...
There we go.
And then when I put it back in,
reinsert,
take my nippers again,
go around the spot,
and just re-secure it.
All right, so now I have
my track layout set up.
Now, this oval configuration
of eight curves, two straights,
this was very common.
Where should you set your layout up?
Well, the first question is,
is this going to be a temporary setup
or is it going to be more
of a permanent setup?
So if it is a temporary setup,
it is fine to set it on a temporary,
on a table, on the floor.
If you're using tubular track especially,
I do not recommend
setting it directly on carpet.
Not only can the carpet fibers
come up between the rails
and get into the gears
of the locomotive,
but as you lubricate your engine,
it could drop oil
and you don't want to have
those stains on your carpet.
If you're using a system
with the integrated roadbed,
that's not so much of a problem
because the oil will stay here
and also the carpet fibers
will not come up
except possibly
at the joints of the track.
You may want to use something
underneath it if it is on the floor,
such as the styrofoam panels.
Also, this is great
for a Christmas layout
that already kind of looks like snow.
You can set it up
on a dining room table,
on a folding table,
anything that's wide enough
and long enough
that will hold the layout
will be fine.
Now how do we get the electricity
from the power pack
to our track?
And usually with that
we use a lock-on like this.
So this is your typical
Lionel lock-on.
You slide this
under the outside rail
and then click the little springy part
on the center rail
and then you have two contacts,
one for the outside rail
one for the inside rail
that you wire up
your transformer to.
Now these can be other designs.
This one was made by K-Line.
This is made for both S-gauge
and O-gauge track.
This is an older Lionel type
that is made
for multiple types of track.
Modern lock-ons can be as simple
as a plug-and-play
with a barrel joint.
Another option
if you don't have the lock-on,
if that didn't come with your set,
is wiring directly to the track.
Just one wire
goes to the outside rail,
one goes to the inside rail.
You can solder the wires
or using the screwdriver trick,
you can open up this gap
in the bottom of the rail,
push the wire in
and crimp it closed.
That works great
for temporary layouts.
You can then solder it in place
if you wanted to
or use a spade connector,
electrical spade connector.
Do the same thing.
Widen the rail,
stick the spade connector
with the wire in there
and that will work
if you don't have the connector.
For a small oval such as this,
one connection should be sufficient.
With a slightly larger layout,
you may want to add power
at the back of the layout as well.
So simply with that,
add another lock-on to the other side.
Wire number 1 to number 1,
number 2 to number 2
and you've got power distribution
evenly across the rest of the layout.
As for wires,
well, these wires
were already attached
to the transformer
so I'm just going to use those.
But any 18 to 14 gauge wire will work.
I like to use what's known as doorbell wire
because it comes as a two-wire strand,
red and white.
It's rather economical
and it's just the right size
for use on the layout.
For screw connections like these,
the best way to attach your wire
is bend the end into a little hook shape
and then put it on clockwise
so that as you tighten down the screw,
it tightens down the wire.
On this clip type of lock-on,
I like to load these
from the inside out.
That way it is the insulation
that is touching each other.
Bend this down
and then I loop this back over
just to make sure
it's making good contact.
And now we're ready
to put the train on
and let's run!
And here we go!
As you can see,
you can get started
with Lionel trains
without a large investment
of either time or money
if you start with
one of the many
second-hand starter sets
that are available.
These older sets
are a great way
to learn the basics
of toy trains
and that may lead you
to feel more confident
about adding more trains,
new or used,
to your roster.
And once you have your
new-to-you train set together,
keep the trains running
and you can join us next time
for more toy train tips and tricks.