WANT MORE INSPO? 📚 GET THE BOOK: https://bit.ly/3QItBhH ☝️The Ultimate Coffee Table Book! Retreat Homes & Interiors
Alright we have A LOT going on in our home renovation at the moment. There's much to discuss TBH but first let's just say we need more storage and we need it FAST. So Jonno is on the tools to build a double carport for an immediate storage solution while also adding a long-term garage to the property. Let's go...
Do you have a product you want us to review? 👉 SEND TO: Attn: Jonno Rodd Hunting for George Parcel Collect 10103 33142 350 Orrong Road Caulfield North 3161 Victoria, Australia
So what are you guys up to? You building me a carport or what?
Yeah, we're building a little carport.
Okay.
Yeah.
How long is that going to take?
I don't know. We've already spent half a day just moving a tree.
So, we'll see what happens.
But by clearing those trees, you've created a little light in the laundry.
Oh, the laundry is way better now.
Yeah.
Alright, well I'll come and check on you guys in a bit.
Alright, we've got to get this set out done and then start getting some posts in the ground.
Good luck!
Why are you barking at everything?
Come on, Jesus.
You worked it out yet?
Yeah.
Time to get this set out done so we can get some holes in the ground.
Don't make them too big. We have to do too many bags of concrete.
How big is that big of timber?
That's 320. So that's your hole size.
You want a decent footing.
So yeah, dig on the inside of your circle.
Two shovels.
They're 450 stirrups.
So you've got to go 500.
And then this one was centre.
In front of the house. In front of the garage.
No, I wanted it back.
Because I don't want to have to get rid of all those trees.
I'll take out that little gum, but I can do that later.
Hey Dusty, dig over there.
Dig on the crosses.
First time doing a project like this, so we're working it out as we go.
But what we realised is that a very slight slope makes for a big difference
when trying to do a set out and trying to get all of our posts level.
So, on the Kubota, scraping back, digging a little channel so we can get our string line up
and make sure that we get all of our stirrups in the ground at the right height.
Let's keep going.
Enough?
I reckon.
It's got to be.
Well, you don't want to dig down here anymore.
So in light of planning for this, we're just going to keep digging.
We're going to need to scrape back a bit more dirt
so we can get our set out around all four sides.
Let's keep going.
5900 total.
Outside to outside.
Minus 180 is 5720.
That's centre to centre.
Just go centre of 5900 as well.
That's the centre of the garage.
Yeah, exactly.
2950.
That'll be alright.
Yeah, yeah.
Three metres, instead of six metres.
Yeah, yeah.
We need the middle post.
Yeah, the middle post is more for the walls.
Why are you planning that?
Because I've already got it, yeah.
That's just James Hardy fine texture cladding.
Just looks like render.
And I've already got paint for it as well.
I'm going to paint it before I put the roof on it.
So I don't have to mask anything up.
You know, there was a reason for a middle post.
So you use that to batten it?
Batten on the outside.
And then you've got your roof gate and then you've got a capping.
Capping, yeah.
Have you ordered cappings?
Yeah, yeah.
What colour?
A woodland grey.
Are you doing that ---- out of that as well?
At the moment, yeah.
And then I'll redo the roof.
Yeah, I hadn't worked out the final lengths and stuff
so I just ordered everything at 6.1.
So I can cut the sheets if I need to.
So a little bit more of a site cut needed than we originally thought.
Probably dropped it down 300 mil.
Plenty of tree roots.
Dusty's been helping with that too.
Most important part, starting at the bottom, making sure everything is square.
So we're measuring to make sure that we get that third corner in exactly the right spot.
So it's not only the same width at the front and the back,
but it's also square with 90 degree corners.
Very important to get it as close to perfect as you can from the start.
Otherwise, you just end up with more problems and more things out of square
the further you get into the build.
That's how we need to start.
Start square, finish square.
Now we can measure off this one.
Well now we can dig this one and that one.
Yep.
We can mark our 5.9 for the outside.
We're going centre of the post now.
Think about that height now.
Sweet.
Part one, complete.
Let's do the first one.
See how many bags it takes, I reckon.
How's this one doing?
He's doing good.
We just did tummy time.
Oh, old squinty eyes.
He's getting better on his tummy.
It's bright, mate.
Ooh.
Our post holes are 300 round and about 600 deep.
So we're using about four bags of concrete per stirrup.
Should be plenty for the size of this structure.
Definitely more concrete that's in the current house,
which is zero.
Better.
There we are, perfect now.
Not bad for one day's work.
A bit of a sight cut.
Got all of our stirrups in the ground.
And now we've got a little Bunnings delivery coming.
All of our timber so we can get our post in
and then start working on our structure.
How good is it when you get a delivery
and the things that you need are on the bottom of the pack?
Oh well, time to move a bit of timber
and get to those posts that we need.
And you can see sitting under all of these heavy bits of timber.
Well, if we can get these posts up today,
that's one job done.
That's it.
That's all we're doing today.
We'll get the posts up.
We'll probably work out our levels
with a little skillion roof.
That's about all we need to get done.
Then we'll get the big heavy timber up tomorrow
and then maybe sheet the outside.
Still waiting on a bit of colour bond and stuff to turn up.
So we can't get the roof on until that turns up.
Get into it.
Just getting the post standing up.
A couple of through bolts through the bottom
and some timber bracing to hold them level
before we get onto the roof.
But in the meantime,
we've got a couple of trees to knock down.
All right, let's pull this tree down.
I'll put a bit of tension on it.
Give it a little nick.
Don't have to cut it too low either.
Leave that.
Dig it out later.
It's probably going to try and go that way.
I know.
Because it's all heavy on there.
What did you find?
Free money.
Old school.
That must have been deep in the ground.
We've been scraping for like two days.
Bonus.
Clean it up.
See how old it is.
It's pretty old, mate.
Is it two cents?
Yeah.
Yeah, it's two cents.
What do you do?
Whack it in Coca-Cola.
I want to do that.
Let's see it.
Oh, we'll do it at lunchtime.
I think you need the full flavoured Coke,
not Coke Zero though.
Yeah, probably.
Back on the carport build.
Good.
Quick bit of tree lopping.
It's good that we did that now.
Bit of clearing.
Yep, going to make it easier later.
Oh, going to knock that one off.
It's going to fall on the roof.
We're just going to do a basic skillion roof on this carport build.
So we're just eyeballing our height
and then sort of checking that our clearance at the front
and the back of the garage is enough
for all the stuff that we sort of want to put in there.
I want to be able to put a car in there,
put a tractor, a mower, that sort of thing.
So we're just kind of working out what will look good by eye
and then we'll cut all our timber to suit.
We'll nail off this end first
and then we can, I can come over and push that one in.
If we just flex the post though.
Which one, which one was it you needed to get out of the pump?
The far one.
Probably this one.
If we nail this one off first,
we could even nail the centre.
Famous last word.
She'll fit, mate.
Cover it in, cover it in glue.
You want the bow.
You want to put glue that side.
That's good.
It's nice, clean detail.
It's all square up there now.
It's good.
Looks good on the inside.
I think that was an easier way of doing it
than notching and stuff
because we'll through bolt it in a bit.
Lunchtime, mate.
Time to get stuck in.
Time for a break.
What are you setting up?
Sitting in the Uber.
Setting up a seat.
I don't know.
Sitting.
Sitting in the dirt.
Have you even not sat in an Uber?
No.
Primo.
Bloody excellent.
It's got to get a good bottom fold
and then go as tight as you can
without tearing it.
It's always the challenge.
It's got to drip down.
Oh, it always drips.
But once you pick them up,
you can't put them down.
It's like a wobble.
It's like a pie when you're driving.
Trying to eat a pie one-handed
while driving.
What a day.
It's like perfect temp.
Have another wrap, mate.
Have another wrap.
Who's here?
Oh, good stuff.
We're about to check
if our calculations actually work.
So stay tuned.
Yeah, I know.
But I'm just looking for the angle.
There.
What do you reckon?
How are you looking?
I've got a little bit of a gap at the bottom
but that'll just pull in.
There's like half a blade in it.
All right, we're going to pull it down
and we'll use it as a template.
We've been pretty lucky with the weather, mate.
Look at that big cloud out there to see.
We've got all our rafters in.
Time to finish out the nogs.
Then we'll get some battens on the roof.
And hopefully the roof sheets turn up soon.
Count.
Kind of in the way now.
I keep tripping on it.
Look at that blue sky.
I wonder if it's still square.
Don't mess up the last one.
Beauty.
Job done.
We did decide the best practice
was to put some bracing on this thing.
It was flexing a bit.
That's because there's no
battens on the walls yet
or any sheeting on it.
But best option is always to strap it.
Gives it a bit of tension.
So that's what we're doing now.
A bit of metal strapping.
Tension it up.
Get around all three sides.
And she's not going anywhere.
Site manager Dusty
still cleaning up all of our timber offcuts.
Good work, Dusty.
We're battening out the walls
in preparation for the sheeting.
Just temporarily nailing them now.
But we will bugle screw them all down
for extra strength too.
Getting close now.
We could do the verticals otherwise.
We'll see how the first one goes on.
We do have quite a decent...
We've got a decent spacing.
We can do it from the back.
Huh?
We can do it from the back.
That's right.
Yeah.
If we do it from the back
just with glue later
and then just nail it.
That'll be quicker.
We'll see how they go on.
We'll see, don't we?
We'll see if there's any flex
between those battens
because there's quite a bit of spacing.
I'd say there would be.
Yeah.
Which site manager?
This one.
Not Dusty.
He's like the enforcer.
So when are we going to have this finished then?
We will have cladding on today.
I might paint tomorrow if I can.
Ooh, painting.
And then I'm waiting for a delivery from Bunnings
for roof sheets on Friday.
So we'll get the roof on on Monday.
The roof's looking pretty good.
Pretty strong.
Strong now.
We had to add a couple extra posts.
What do you reckon, Oatman?
Yeah, what do you reckon, Oatman?
Got a new suit on.
It's a sweet suit.
Dinosaurs!
Yeah!
All right.
Grab a sheet, mate.
Dusty, grab a sheet.
It's all coming together quickly now.
It's going to start looking like an actual garage very soon.
Bit of glue, some nails, those sheets will be on,
and then we'll get painting.
All right, we had to take yesterday off
because it got way too windy to move sheets.
But one wall to go, couple of sheets on the front,
then we can batten out the roof,
and then it's time for roofing.
Let's see how we go.
Thought about what I'm going to do on here.
Might have to put a strip across.
Oh, yeah.
So it looks the same.
Might as well wrap it.
We'll wrap around, go into here,
because it's going to get a bit of weather.
We can move over to the other side,
get that last sheet in, wrap the corners,
strip across the front.
I'll get some more of those angle trims.
We can roof sheet it tomorrow.
Then it's done.
Dig holes in the house.
Might leave it there for the moment.
We've got the battens on for the roof.
So a bit of paint to go, get the roof on,
and then we should be done.
See you in the next one.