There’s just something about a steam engine. The combination of fire and water to create power and movement in a machine that seems almost alive as it breathes and hisses. Many of our contemporary O gauge model train layouts are populated by models of steam engines - more than 70 years after their their use on actual railroads became rare. But regardless of whether our model is Thomas The Tank Engine or Big Boy - it’s still just a model - impersonating the fire-breathing prototypes with electric motors and fake smoke and chugging sounds.
That’s why I was so excited when the folks at Stirling Kit offered me the chance to build, operate, and review a REAL steam engine. That’s right - a real fire breathing, water heating, steam spewing, piston churning steam engine!
Now, while this is not a steam locomotive - it’s a stationary model that will operate on my workbench, not my layout - it still shares all of the major features and functions of the real thing - from tank engine - to Big Boy. And, it's FUN!
**As an Amazon Associate and a member of other affiliate networks, We may receive commissions on qualifying sales generated from the links on this channel.***
Toy Train Tips And Tricks is a channel devoted to the operation, repair, history, and collecting of classic 3-rail O and O27 gauge trains made by Lionel, Marx, K-Line, Menards, and other manufacturers.
Stationary steam engines. They're not just for Brits anymore.
On this episode of Toy Train Tips and Tricks.
Wouldn't it be cool to be able to build and operate your own steam engine?
I mean, not like this electric motor that looks
like a steam locomotive. What if you could build a real live
fire lighting, water guzzling, steam producing, spinning
spitting steam engine of your own? Well that's what
we're going to try to do with the help of this kit by Sterling Kit.
Now Sterling Kit makes a whole line of different models. This is
the rather basic model. This one is called the Rocking Whale
and incidentally that would be what a lot of people would describe
my dance style as. But in any case, this is a real
live light the fire, heat the water, create the steam
and watch the motion happen steam engine. Now this
is a hobby that seems to be quite popular over in the UK.
Hasn't quite caught on here in the US of A, but maybe
things like this will help solve that. So follow along while I
build this and see what the pros and cons of this
Sterling Kit model are. In the name of
full disclosure, this kit was provided by Sterling Kit for the purposes of
this review. However, they have no editorial control over the
content of the video whatsoever. Whether I like it, don't like it
or somewhere in between, that has no bearing whatsoever on the content
of this video. So let's see what we've got. So here is
the kit and let's open it up and take a look at what we've got. Now I did
cheat. I looked ahead in the manual because never having
bought one of these before, I wanted to make sure that I had all the supplies ready to go.
And while there are tools included, there
are some supplies you will need, including lubricating oil
which Sterling Kit recommends 0W-30
motor oil. This ought to last a very long time. We also need
some thread mock medium strength. That's the blue stuff. No problem.
And then there's the steam cylinder oil. Now
again, I mentioned this is a pretty common hobby in the UK
so I would imagine that there are hobby shops all over that have
steam cylinder oil there, but not so much in the USA.
So as I checked Amazon, most of the suppliers
were from the UK and it was going to take quite a while to ship
across the pond, but I did find one shop in California that had it
in stock and ordered from them. And I'm going to include
the link to AccuCraft Trains in the video
description as that's where this came from. With that, let's open
up the rest of this and see what we've got. We've got a base plate.
We have lots of brass parts.
Okay, that's cool. That looks like
fun. Alright. We have several
bags of parts that are numbered. I'm assuming that they will correspond to
different steps in the instructions. I want to keep that.
That looks like a smokestack. There is the
outer covering for the oil burdens. What else is in here?
Oh, yes, a pressure gauge. That's very, very important.
Okay, some more small parts here. They have a flywheel.
Okay, these smaller parts I'm going to leave here in the foam until I need them.
Oh, yes, and there looks like the safety valve. Again,
very important so that if the pressure builds up too much, it releases
through the pressure release valve. Lots and lots of little hardware. Again,
numbered bags and tools.
The tools we are going to need and some spare parts.
Okay, and I bet there's some more parts in
here. If I pull this foam out.
This is our burner tray for our fuel and
I think that's the boiler. Yes, the boiler itself.
This is the important piece.
Looks like a sight glass will be there.
Alright, so there we go. And at the end of
step one, we have a crankshaft.
So far, so good. Okay, and this is the first step where
I needed a tool that wasn't included. You do need a set of calipers because
it is very important to get the length of
the whole piston assembly here, piston and crosshead, exactly
the right length at 40 and a
half, 40.5 millimeters. Step two
is complete and now we have a piston. Step three
complete. We have the piston, we have the cylinder.
Alright, we are making progress. Step seven, eight,
and nine went very smoothly. That's just assembling and attaching
the exhaust and intake manifolds. And now
this part of the assembly is pretty much done.
And speaking of ridiculously small hardware, the
four Phillips screws that attach the main plate
these have got to be the smallest Phillips screws ever. I was able
to get one in and the others
have vanished after several attempts.
So I'm probably just going to end up gluing it the rest of the way
in place. I have no idea where these screws went. Even using my
magnifier and tweezers to try to get them in, they would go pop and fly off
and I have no idea where they've gone. But the main
part of the steam engine, the main mechanism here is
finished except for mounting the flywheel, which
I'm going to need that small nut for. Hey, there's one of those
screws right over here. Okay, good news, bad news time. As I'm
moving on to the boiler, I think I'm just getting tired as a lot of
these screws, as I'm trying to reach into tight places, things are flying
all over the room. And so I'm going to walk away. The good news
is while searching for another screw that went flying off, I did find
my missing piece for the flywheel. There it is
right there. So I will be able to attach the flywheel
and that will finish that off. But hopefully I have
enough in the spare parts bin to finish
assembling the boiler from screws that I'm having to reach
down into deep places and then they're flying off of the
tweezers and bouncing around and going all over the place. So I think I'm
just tired. I'm going to stop here and walk away and
come back refreshed for the next session. And now
we are all the way through step 13. We have a
boiler and now it's a matter of hooking up the piping to there
to there and attaching it to the base. I feel like celebrating.
Step 14.4, these two hinges, eight screws
and this flap. That's an hour and a half of work. Oh my goodness.
So now the assembly is completed.
I must say this has been a greater struggle than I was expecting
it to be. Looking at the directions, I was expecting two,
maybe three evenings. It has been nine. But
in defense of the kit, most of that delay is related
to me being an old man with really bad eyes
and really bad hands as far as arthritis and tendonitis.
So sometimes it took me up to an hour to get a single screw in
which is ridiculous. Now I did have my
teenage son was able to help me on a couple of the steps
which helped things along even better. So we are
assembled and now we are getting ready to do
our boiler test and get everything ready to fire
it up and go. So we're going to see what the directions have to say as far as
making sure everything is good and tight and ready to
go and we'll follow along. Alright, so it says the first
step is for each run I need to add about four
milliliters of the steam oil to the oil
cup here. So I'm going to take the lid off here
and I have these little pipettes. Grab a towel.
Okay, so that is about two.
It won't hold that much. There it goes down into the cup.
And two more. Alright.
I'm going to put our lid back on here. Then all of our
moving parts get treated with our regular
machine oil which again they recommended the
0W30 motor oil and rather than handle it that way
I got these needle point bottles from Hobby Lobby
and actually I've already done it but
all of the moving parts in here
get a good coat of oil which like I said I've already done so I'm not going to do it
again and you can see how everything here is turning
freely. So that part is finished.
Okay, so the next step is to add water to the boiler so I'm going to turn
it this way so I can check the level in the site mass.
Then we unscrew our pressure relief valve
here and I'm going to use some distilled
water. Filtered water would probably still work but distilled water
here our tap water in Ohio is
quite full of all kinds of limestone
and other things that would gum up so we're going to fill it up.
This will also help me see if I've got any leaks. Okay, note to self
get a funnel. Something small enough
to do this. This takes a lot more water than you think it does and filling it with these
pipettes is taking forever. Now when this thing is in operation
water goes just about everywhere so I'm putting it
on this tray to contain the mess here on the workbench and now it
says to add 20 to 30 milliliters
of our alcohol fuel to the burner.
So I'm probably going to end up getting a syringe for that for right now. To make the measurement good
I'm using the pipettes. This is going to take a while. It's going to take about 10
of these and I've got my alcohol
fuel. Make sure it's the good stuff. You don't want
to use like 50% isopropyl. You want to use actual alcohol
fuel. This denatured alcohol for this. The cleaner
the burn the longer your engine is going to last. This is loaded
I am ready to fire it up. I'm going to turn the light off because
alcohol burns so clean that you're not going to see it on camera unless I
turn off some of these lights. Let's see what we got. Okay
I can see a little blue flame and
is there any heat there? I can't tell. Let me try that again.
I saw a little blue flame there. Okay
I can see the flame. It's spreading. It's spreading.
Okay. That's going to be good.
Let's slide the tray in place. Good.
Close. Now make sure our
throttle here is closed and let's
watch the pressure valve. When it gets up to about
2 bars there then we should have enough pressure to
begin operation. Alright the pressure gauge reads just over
2 bars so it's the moment of truth.
Let's open up the valve and see what happens.
I've got water. Let's crank it back down
and build the pressure back up. At least I know it works but it looks like I need to
tighten up that seal a little bit. But it did run for a minute
though, didn't it? Alright we still have plenty of water in the boiler
I don't know how much alcohol we still have left to burn. It's still hot.
Let's try again.
There we go. As it says
the more it runs the more it will break in
and get smoother. But I'm pretty happy with that so far.
That's not bad at all. And they say during the
break-in period you don't want to turn it up too high. And of course the higher
you turn it up the quicker it's going to bleed down the boiler. And we don't have
that much pressure left in the boiler right now so I'm going to turn it back down
and let it go again. Cool.
So as the engine was cooling down for my last attempt I was able to
take a closer look and I did find a couple more leaks.
Most significantly there was a huge leak right here. I was amazed that
the boiler was even able to maintain pressure with such a
huge gap here. So that's tightened down. Some others are tightened down.
So we should hold pressure much better this time and
better operation. So let's light this thing.
Okay I feel the heat. I do not see anything.
Yeah I don't even see a blue flame or anything
but I can feel the heat coming off. So I must assume
we are lit. So let's slide the tray in
and close it up. This is turned off so
we should start building up boiler pressure. Now while we are waiting
for the pressure to build up let's go through exactly what's happening
here in the steam engine. Obviously we've got the water in the boiler
the fuel burns, heats up the water in the boiler kind of like a
teapot. Once the pressure is enough we release it here
the steam then passes through here. Now it goes through the
smokestack. Oh yeah it's already warm. It goes through the smokestack.
Now this is kind of a poor man's super heater in that we're taking
the steam and even if only just for a brief second
we're adding more heat to it to make it that much
more efficient. This is the principle that would be used in modern
steam engines with a super heater but it would be more than a simple one pipe pass
through the exhaust. It's more complicated than that.
But anyway so now we have our heated steam. It goes over here
we've got our oil tank. So the pressurized steam comes here, mixes
in with the oil and then comes
in here to our cylinder. This way
the inside of the cylinder where our piston and
reverser are stay lubricated. We can't reach them from the outside
so this is how they are lubricated from the inside.
So that inside part of the chamber stays lubricated
and then of course the exhaust comes out and this is going to be a mixture of
steam and some oil. Then our mechanisms
here, here is our main piston which is going to with the steam pressure
in here is going to be pushed up and down, which through the gears
down here is going to rotate our crankshaft.
And this is our reversing mechanism
I think, now I'm not super up on my
steam technology, but I think this is a version of what would be called a
Walshert's valve gear. And it does two things. By changing
the position of this up here
inside the cylinder, you can not only change the direction
of the crankshaft, but you can
on a larger locomotive, a larger engine, you can
increase and decrease the amount of
steam that comes through on each stroke so that
when you're running at high speed you would want to shorten the stroke
keeping more of the pressure in the boiler. When you need more
power, you open it up so you get more steam per
stroke to give you more power. Now obviously on a
mechanism as small as this, it's not going to make that much difference
either way, but that is the principle that is involved.
So as long as you keep the steam oil
in and running each time, keep these parts lubricated
and check after every run for loose screws, loose
bolts, things that with expansion and contraction might come loose,
this thing should run forever. Now the one messy part, the
exhaust here with the steam and water going everywhere, I may choose
to modify that, add another pipe, maybe push the exhaust
and that oil and water gunk back here somewhere to collect it
but for right now just keep a towel on it and it'll be fine.
There also is a way you can expand, this is the flywheel
with only a single cylinder on only a
single piston, it would be possible to get
stuck at the top or bottom of the stroke. The
flywheel here gives the momentum to continue it until you
receive power again. Now there is room on the other side, conceivably
to add a pulley, maybe to do some mechanical work, maybe
attach a small DC generator to it, I don't know, maybe you could charge your
cell phone with it, but that possibility is there.
You've got the other end of the crankshaft here and plenty of holes to mount
something with. So other than that, we are just waiting for the pressure
to build and we are going to give it another run. Alright, we're at 2.5
approaching 3 bar, which in the world
of imperial measurements would be off the top of my head
40-45-ish PSI, so we should be in good shape.
I don't hear any of the tell-tale hissing and bubbling
that I heard before when I had leaking here, so let's go ahead
and open her up. Oh, come on.
There we go, a little more pressure. There we go!
Now like I said, one thing that I would like to modify on this is this exhaust blowing all
this gunk back this way, but
yeah, that's the joy of skiing, right?
Let's slow it down a little bit. There we go.
And at this point, pressure is building faster than I'm
using it up here at this slow speed, so
it would go like this pretty much until
it runs out of fuel, which should be 20 or
25 minutes or so for a run like that. So you can see how the
mechanism is, as it's breaking in, it's getting smoother and smoother
and quieter and quieter, and we can really crank this down
and it's still running and we are back over two bars.
Let's see how slow I can get it.
That's about as slow as I can go at this pressure because I've almost
got the pressure gauge turned off.
And we've built back up, we are almost to three bars again.
So let's have some fun. Let's crank it up and see what happens.
So what's my final impression of the Sterling Kit Rocking
Whale Steam Engine Kit? Well, on the positive sides
it looks sharp, whether it's running or not.
The brass, the copper, it just looks
really cool. It is very well machined. All of the screws
fit exactly the way they are supposed to. The clearances are
surprisingly tight for such a small
steam engine. Third of all, it works very well and
very easy. You make sure everything is lubricated, fill up the water,
light the fire, let it build up pressure and it goes.
So all of the things that you want to be positives are
definitely positives on this kit. There are a few
negatives that I came across and mainly it's because of me.
As an older fellow with trifocal eyes, with
arthritis and tendinitis in the hands, many of the really, really
small parts were not only really difficult to see
but handling them limited my progress. I don't anticipate
most folks will have that problem. As a matter of fact, the last
two nights, my teenage son helped with the construction and it went
much faster because he could see the parts, he could touch the parts and he could move his
fingers when needed to be done. So if you are in relatively good
health and eyesight, yeah, two to three evenings and you shouldn't have
too much trouble. As far as the bags of parts, they are
more or less in a chronological order but they do not
necessarily correspond to the step numbers. So overall
I would definitely recommend this kit for somebody who is interested
in getting into stationary steam engines. Again, this
is the basic model. So what would you use it for?
Well, other than the fact that when it's running it looks really, really cool or like I said
even when it's sitting on a shelf, I don't want to pick it up because it's still warm from the last time
I ran it. I could certainly see this as a teaching tool.
Thinking of science classes, thinking of thermodynamics, thinking of mechanics.
Lots of lessons that you can use with the steam
engine. Certainly in a history class, if we're talking about the industrial revolution
how things like this, these little machines, change
the world just like AI is changing things today. So overall
absolutely the Sterling Kit Rocking Whale is
definitely worth the assembly. So I'm going to have some fun and
run it a few more times here and then I'll get back to the layout and get the trains
running. So we'll catch you next time with more Toy Train Tips and Tricks.