Next Level Pumpkin Carving

Carving Art Channel
11 followers
Feb 27, 2026 #ScuLPture
Comments are disabled for this video.
Have you ever tried turning a pumpkin into a masterpiece?
Or are you stuck on the same old triangular eyes?
We're gonna deep dive into 15 incredible pumpkin designs.
Starting with some nice easy ones,
progressing to some really challenging designs using intricate techniques.
What level are you at?
For the first one, we're gonna style it up a little by tipping the pumpkin onto its side
so we can use the stem as a nose.
To draw the design, we'll tip it back onto its base
and I'm drawing on some slightly menacing looking eyes
in between these natural crease lines.
Then I'm drawing on a wide open mouth with some slightly goofy looking teeth.
Draw in some eyeballs as well and some pupils.
And to make things really simple, instead of carving this pumpkin,
we're actually going to paint on our design.
I'm starting with white and painting in the edge of the eyes here.
What's nice is if you make a mistake,
it's so easy just to wipe off then touch it in again.
And once you've done the eyes, we can work on the teeth.
I went with these large square teeth,
but of course you can paint on whatever design you like.
Maybe some fangs or a big smile like this.
With the teeth all filled in, you can go ahead and paint in the eyes.
And with the white paint now dry, I'm using black to fill in the entire mouth.
If the paint has dried a little thin,
you can give things a second coat to make the colors really pop.
And I also painted in the pupils.
Leave it to dry.
Then I'm mixing together a little bit of yellow and white
to dirty up the teeth a little bit.
I painted the pupils a little bit bigger
and you can use a marker pen to go over the rest of the black.
It looks great and it's so easy to do.
Next, we're going to make a spinning pumpkin disco ball.
For this, we need to carefully cut off the top,
then clean out all the insides.
Once you've done that, use a screwdriver to pierce a series of holes
around the entire pumpkin.
If you prefer, you could use a hand drill.
Then use some thick cord to poke through one of the holes,
tie a knot in the other end,
pull it through and do the same on the other side.
And to make it stronger, you can add a second string,
tie them together with another string
and hang it up from a strong hook in the ceiling.
You could hang it from a tree branch.
Make sure the knots are nice and secure
and light it up with a flashlight.
Give it a little spin and dim the lights.
For the next one, we're going to make the bat logo.
Start by drawing on the outside surround,
then the bat logo inside.
It's held on with tabs at each end.
Once you're happy with the design, you can cut it out.
Do be careful not to go over the lines.
It should look like this.
Add a little flashlight and dim the lights.
It's nice and easy to make
and it looks great beaming down from an upstairs window.
For the next one, I'm drawing a large wide open mouth
with a row of sharp pointy teeth across the top and the bottom.
For this one, I'm going to be doing a combination of painting and carving
and this pack of pumpkin tools is ideal.
There's a link in the description if you want to buy some.
I started by using this saw
to cut all the way around where the mouth opening is going to be,
then carefully remove the whole piece.
Look at that.
The insides are so stringy.
That's a really cool look
and instead of scooping it all out, I'm going to leave it.
Next, I'm going to use this tool
to carefully remove the skin from in front of the teeth.
It's got a nice sharp edge to the tool
so it cuts through easily
but you do need to be careful
because you don't want to make a mistake
and cut outside of the line.
You can use it to shape the teeth a little bit
and I also used some of the other tools
to get right up in between the teeth
to clean them up a bit and to really define them.
Once you've finished across the top,
do the same across the bottom
and once you're happy with that,
it's time to draw on the eyes.
For this one, we're going to go with the classic triangle eyes.
I used a marker to draw them on
but I'm going to be painting them on.
Next, we're going to paint the teeth white.
Give them a good covering top and bottom
then paint in the eyes.
I painted the outlines and the eyeballs
and once it had dried,
I painted a little bit of red in the corners
and a spot of white in the center of each to finish it off.
Next, we're going to make this really cool pumpkin message board.
Once you've hollowed out and cleaned up your pumpkin,
we're ready to start.
It's going to be a message board
similar to this light box
and we'll be using these letters for our pumpkin.
Hold one of the letters up against the pumpkin
and mark the top and bottom of it with a pen.
Do this around the pumpkin
to make the message board as long as you like.
Then I'm doing a second row underneath.
When you finished, join up the dots like this.
Then carefully remove the skin from the pumpkin.
Do go carefully and stay within the lines.
Once you've done across the top and the bottom,
if you hold one of the letters up against it,
you can see because of the curve of the pumpkin,
we can't get it to stick in the groove.
So use a knife to cut the recess a bit deeper
and try to flatten it out as much as possible.
When you finished, try installing a letter again.
It now holds it firmly in place.
If there's any black pen left on the pumpkin,
you can use some soapy water and gently scrub it off.
You can now take the letters from your light box
and clip them in place to write whatever message you like.
You can light it up with a candle and the whole thing glows.
It's the perfect pumpkin Halloween message board.
For this one, we're going to do some really cool eyes
and a mouth with lots of teeth and a small nose.
The first thing we're doing is cutting off the pumpkin flesh
in front of the eyeballs.
Then I'm using this small pumpkin carving saw
to cut out the flesh around them.
I also cut out the nose and the mouth too,
up to the teeth line.
Next, you can use one of the carving tools
to remove the skin in front of the teeth.
Then you can use the small saw to cut out individual teeth.
This really helps to give them definition
and it makes the mouth look really cool.
Work your way across the top and the bottom ones too.
Next, I'm using this tool to shape the eyeball a little.
I'm making it into a sphere
and I also opened up the hole a little bit more
and do the same on the other side.
Then finally, use a small drill
to make a hole straight through the middle.
Then you can use it a little bit like a saw
to open up the hole a little bit bigger.
Check that out.
Doesn't it look cool?
And it's not too difficult.
Next, I'm going to show you how to make
this really cool spewing pumpkin.
Carefully remove the top
and cut off any stringy parts.
Put them into a bowl
because we'll be using these later.
Then use a big spoon
to scoop out any of the stringy innards
and the pumpkin seeds
and put these in the same bowl.
This is going to be our pumpkin spew.
It's nice and stringy and wet.
Use your spoon to scrape away at the inside of the pumpkin
to reduce the wall thickness a little.
Scratch all the way around the insides with a spoon
and scoop it out into a different bowl.
This part of the pumpkin tastes delicious
and we can use it for cooking.
For this design,
we're going to start with some upturned eyebrows
followed by some squinting eyes
and a wide open mouth ready for the vomit.
Instead of cutting out eyebrows and eyes,
we're going to just remove the skin
from in front of the flesh
then cut out the hole for the mouth.
That's our pumpkin carved.
If you haven't got any paint,
you can mix some red and blue food colouring together
to make a dark colour
and we're going to brush this
into the fleshy part of the pumpkin
for the eyebrows and the eyes to darken them up.
Now it's time to add the spew.
Spoon it into the mouth
and across the table
so it looks like he's projectile vomiting his insides.
Pretty gross, huh?
You can also use it to make a pumpkin nacho snack bar.
You can make your own or buy some guacamole
and spoon it across a plate
and into the mouth.
Place on a jar of salsa dip
and fill around with tortilla chips.
You can even place a sour cream and chive dip inside the head.
Use some cocktail sticks if you need to.
How cool is that?
Scooping up the vomit.
Oh, gross, but great fun.
But if you don't want to use the pumpkin for a food display,
you could set it up in the bathroom
so he's vomiting down into the toilet.
This will give your guests a real surprise
when they go to the bathroom.
For the next one,
I'm going to show you how to make some really cool fangs.
I cut out some large pear-shaped eyes
and a wide open mouth.
Try to remove it all in one piece
because we'll be using this later.
You can see they're nice big holes
and it already looks quite cool.
Now, with this offcut from the mouth,
we need to use a sharp knife
and carefully cut out some fangs.
Make sure they're nice and pointy at the bottom
and you need to cut out a whole series of them.
Once you've done that,
to fit them,
we're going to push a cocktail stick into the end
and snap the end off to make it a bit shorter.
It should look like this.
Then we can start arranging them in the mouth.
Large ones at the edge
and smaller ones in the middle.
And once you've finished,
you should have an amazing-looking pumpkin
with vicious-looking fangs.
How cool is that?
This is definitely one of my favorite design styles.
Next, we're going to do something similar
but with this baby munchkin pumpkin.
It's so small,
it fits in the palm of your hand.
Start off by drawing on your design with a pen
and again,
you need to make the mouth quite wide.
I'm going to give this one some triangular eyes
and because it's so small,
I'm going to use this craft knife for carving.
It is very sharp,
so you need to be extra careful.
Then I used a teaspoon to scoop out all of the innards.
There's actually a surprising amount inside
and because it's also small,
it is quite a tricky one to do.
Once you've removed them all,
you can give it a bit of a cleanup.
Then you can use your knife
to remove the skin in front of the eyes
and cut out the nose.
To make the fangs,
we're going to use cocktail sticks.
Use some cutters to cut off the point
then grip them with some long-nosed pliers
and plant them into the mouth of the pumpkin like this.
It is quite tricky,
so take your time
and work your way across the whole mouth.
Next, for the eyes,
I'm using some liquid paper correction fluid
to fill in the triangles.
Don't worry if you go outside of the line a little
because you can use one of the sticks to tidy it up
and once it's dry,
you can use a marker pen to draw in some dots
and there it is,
our vicious little munchkin pumpkin.
It's a fun alternative to carving a big pumpkin.
You can get some cool effects
by lighting it up with a flashlight from behind
or make a fun display with some toys
like this poor little Lego man.
Next, here's another of my favorites,
a pumpkin eating a mini pumpkin.
Start by hollowing out the large pumpkin
and once you're done,
you can draw on the design.
We'll need to use the mini pumpkin
to gauge the size of the mouth.
Use a marker pen to draw on a teardrop shape
around the small one.
This line is actually going to be the edge of the teeth
and the opening size into the mouth.
So take your knife and carefully cut out the shape.
Don't worry if you don't stick to the line exactly,
then you can take your mini pumpkin
and test it for size.
That fits perfectly.
Next, we need to use our pen again
to draw around the teeth for the mouth
and I'm drawing some lines in for the teeth.
Use a small knife to cut just through the skin
on the outside line
and cut a small gap between the teeth
across the top row
and the bottom.
Then cut the pumpkin skin off each tooth.
Next, I'm drawing on these square menacing looking eyes.
Cut them out and a nose
and I'm using a black marker pen
to draw in some pupils.
That's the large pumpkin complete
and time to do the little one.
I'm drawing on a sad shocked look
then cut out the design
and empty out the contents through the mouth.
Clean it up and there's our mini munchkin
ready to be eaten.
Wedge it in between the teeth
and that's our Halloween pumpkin finished.
Pretty cool, huh?
The poor little munchkin looks terrified
and if you like,
you can add some other mini pumpkins alongside.
If you're enjoying this video,
you might want to subscribe
to make sure you don't miss any of my future content.
I've got loads more cool stuff coming soon
and a massive thank you to everyone
who's already subscribed.
Next, we're going to make this really cool
Spider-Man pumpkin.
Start with a hollowed out pumpkin
and draw on the design.
First of all, the eyes
and then a web.
Join up all the lines
then draw the outline of his face around it.
Use a pen that you can easily wipe off
so you can make corrections easily
and get the design right.
When you're happy with it,
make the lines nice and thick
and as even as possible.
Now we're ready for carving.
So use a sharp knife to cut in between the lines
and remove the skin of the pumpkin.
This part takes a long time
and you need to be careful
not to cut through the lines.
Basically, we want to remove all of the pumpkin
and keep the black lines in place.
If you smudge some of the ink
and get it on the flesh of the pumpkin,
don't worry about it.
We'll sort this out later.
Keep working your way around
until it looks like this.
Then use your knife again
to cut out and remove the eyes.
And once you've finished,
we can wash off all of the ink with some water.
Dry it off
and if there's still ink on the pumpkin flesh,
you can remove it by slicing it off with a knife.
And there we have our finished Spider-Man pumpkin.
Place a flashlight inside
and dim the lights.
How cool is that?
It looks fantastic.
The spider web lines are nice and neat
and the whole face just glows.
Next, we're going to make this amazing Minion pumpkin.
For this one,
we need to start with a pumpkin
that sort of resembles the shape of a Minion.
Then use a sharp knife
to cut a hole in the back of the pumpkin like this.
Scrape out all of the insides with a spoon
and when it's cleaned out,
it should look like this.
Next, draw on your Minion design.
I started with a single eyepiece
and the goggle straps.
I gave him a smile,
then drew on the dungarees
and finally some strands of hair.
I decided to make the eye goggle a little bit larger
and this is going to be an eyelid
with the pupil peering underneath.
We're going to start by cutting out the hair
and the idea is we're going to leave the black lines in place
and remove the pumpkin skin around them.
If you're doing this pumpkin design,
you do need to be careful.
Take your time,
it is quite intricate in places.
Work your way around both sides of the head,
then when you're done,
cut out the line for the goggles
and remove the pumpkin skin up to there.
If you wipe off any ink at all
while you're working on it,
you can just draw it back on.
Carry on working your way all around the pumpkin,
removing all the pumpkin flesh.
Don't forget to leave the skin on for the smile
and do be careful not to cut yourself.
I drew the eye detail back in,
then cut it out
and removed the skin for the eyelid.
Then I cut out the shoulder straps for the dungarees,
drew the pocket on a bit better
and cut out the outline
and finally, I drew on the G logo on the pocket,
carefully cut it out like this
and added a couple of buttons on the dungarees straps.
Next, I took some yellow plasticine,
rolled it out
and shaped it into a couple of arms.
I used a cocktail stick
to help attach a couple of gloves,
then pinned it to the body
with a couple more cocktail sticks.
For shoes, I got these fluffy black pom-poms
and sat him on those.
And there's our minion pumpkin complete.
He looks really cool even before we light him up
and he's great fun to make.
Dim the lights
and there's our glowing minion pumpkin.
Pretty cool, huh?
If you've got any minion fans in the house,
they'll surely love him
and you could make a whole line of them.
For this one, I'm going to use a vegetable peeler
to peel off a whole series of strips
around the side of the pumpkin like this
and I'm going to carve a face
into this fleshy part of the pumpkin.
I used this scraper to draw on a rough layout
then I started using our tools
to remove pumpkin flesh
and bring the design to life.
Initially, we need to remove quite a lot of the flesh
so I'm starting with the bigger carving tools.
I'm carving out definition for the eyes
and the nose.
It's actually an easier process than you might think
and it's really fun to do.
The mouth takes a little bit of thinking about
but I started carving away
and I had to peel off a little bit more of the pumpkin skin.
I removed a bit more material
then started carving in individual teeth.
These fine tools make it really easy to do
and it's really starting to look quite good.
I put a little definition in around the cheeks
and now I'm going to work more on the eyes.
I removed a load more pumpkin flesh
then started carving them in with more detail.
One side and the other.
Next, I started working around the edge of the face a bit more
to give it some more definition
then I added some finer details
some wrinkles and lines
and it's looking great.
Next, I'm using a little black acrylic paint
to paint in some pupils in the eyes
and there's our finished pumpkin.
These little lamps take three AAA batteries
then you just press the center to turn them on
drop them inside and dim the lights
and look at that loads of really cool detail.
Check out the teeth
and the way the light shimmers and flickers is really cool.
For this one, I'm going to make a big split in the side of the pumpkin
to expose a skull underneath
and each side of the split
that'll be the original pumpkin design
so we'll draw that on the sides here
and it's going to look something like this.
These pumpkin carving tools really are handy
and once that's done, we're ready to start on the design.
The first thing I'm doing is scoring a line through the skin
all the way down where this split's going to be
then I'm going to completely remove all the skin from this section
this tool makes it pretty easy
but you do have to be careful because it's pretty sharp on the end
then I smoothed it out a little with this tool
and now we're going to cut out the pumpkin part
I'm starting by cutting out the eye
and the nose
and then the mouth
clean it up a little
then do the same on the other side
here's the other half of the nose
and try to get the mouth nice and even
and when you're done it should look like this
have a little clear up
and now it's time to start carving the skull
I'm using one of these tools to roughly start drawing on the design
then I cut out the eyes
and the nose
we do need to be careful because we don't want to cut through
to where we've already cut out a hole
then once we've done that
we can start carving more away
to start forming the skull shape
I'm curving the forehead a little
then working my way around the eyes
and angling the nose a bit
then I'm trying to sculpt in some cheekbones
and work in some teeth
and draw lines
I really want it to look like it's kind of bursting through the pumpkin
and I'm carving quite deep into the pumpkin flesh
to give it some depth
and a real sort of 3D feel about it
but you do have to be careful not to go all the way through
I just kept working on little bits at a time
and once you're done
the last thing is to place the lid back on
make sure those lines still match up
and remove that bit of pumpkin skin as well
then sit it back on
perfect
and there we go
our pumpkin split open
revealing the skull underneath
it definitely looks creepy
and I love the way it split the original pumpkin open
put a lamp inside and
whoa it looks crazy
for the next one we need to take a marker pen
and draw a line about a third of the way down
all the way around
then draw on the face
I'm giving it some slanting eyes
and a wide mouth with teeth
next we need to turn the pumpkin around
and cut a hole in the back beneath the line
remove the piece
and empty out all the insides
when it's nicely cleaned out
use a knife to start cutting out the details
cut holes for the eyes
and then the mouth
then we need to take a knife
and cut just through the skin
all the way around the black line
don't worry if you don't follow the line exactly
but try to make sure you join up the line
when you get back to the start
now start removing all of the pumpkin skin
from above the line
I'm using a knife blade
but you might be able to do it with a vegetable peeler
cut a bit more of the pumpkin away to make a ledge
now we're gonna start carving in a brain
I started with a knife to carve a line up the middle
you can just scratch away at the pumpkin
then start adding some detail
I also found you can do a really good job
with a ballpoint pen
it pushes into the pumpkin
and makes an impression
work your way around making a pattern
I've just gone for a whole series of squiggly lines
but try to make them neat
once you've gone round all the way back to the beginning
you can use your knife to cut away the skin
from in front of the teeth
same as we've done before
you can also do the eyes
then use some black acrylic paint to colour them in
next we need to take another pumpkin
roughly the same size
and chop the top off to make a lid for on top of the head
clean out the inside so it looks like this
and you can place it on top
or at an angle like this
doesn't that look spooky?
you can patch up the hole at the back
using the piece you cut out
and hold it in place with some cocktail sticks
place a flashlight inside
and dim the lights to make it glow
then lift off the lid to see the whole thing
and if you like you can take some green halloween slime
and make it spewing out of his mouth
complete with some spiders
if you'd like to see how to make this slime
along with a load of other ideas for the best halloween party
you can click on the link here
there's some really cool ideas to shock and surprise your guests
have fun, stay safe and
happy halloween everyone
