13 Levels of Pumpkin Carving: From Easy to Complex | WIRED

Carving Art Channel
11 followers
5 Video Views·Feb 26, 2026
Comments are disabled for this video.
My name is James Hall. I'm a pumpkin carver. I've won Halloween Wars twice and a number of online
contests. Today I've been challenged to explain pumpkin carving in 13 levels of increasing
complexity. Pumpkin carving is kind of a realm where a lot of skill is required. There's a lot
of crafts that you have to learn the further you get into it. And you're on the clock because as
soon as you cut into that pumpkin it's starting to rot. So you learn to let go of the things that
worked hard at. What we're going to be creating here today are just the designs and eyebrows.
No design is really better or worse than another. This is my interpretation of the challenge.
Level one, basic jack-o'-lantern. It's just the two triangle eyes, simple mouth, maybe a nose if
you're feeling really really fancy. I'm choosing this pumpkin because it's just got that classic
shape. When you see illustrations of jack-o'-lanterns on little posters or Halloween cards,
they all look like this. First I'm gonna go ahead and cut the top off so I can get to all the guts
inside. Do not cut straight down. You want to go in at an angle to cut that lid because if you go
straight up and down you'll put the pumpkin lid on there and it'll just drop all the way through.
This is just like the little basic plastic pumpkin scoop you get with the pumpkin carving kits. If
you don't have one of these a spoon will work. Then you just start off by drawing what you want
to carve into the pumpkin. Any kind of washable felt tip marker will work. If you don't like it
take a white paper towel and start over again. Then you will go ahead and cut the facial details
out and you're going to be cutting all the way through the pumpkin wall. I prefer fillet knives
because if you use a knife that's a bit too hefty when you're cutting it'll grip and then when you
pull it out all of a sudden it'll pop free which is a good way to accidentally cut pieces off the
pumpkin and your finger. Easy mistakes to make placement of the facial features take a step back
otherwise you end up carving an eye and realizing that your second eye is an inch lower and twice
as big which isn't necessarily a bad thing. Pumpkins are supposed to be monstrous and ugly
anyway you can do the classic artist thing and lie and say you did something on purpose because
you're a genius. This is the classic jack-o'-lantern cut the top off make sure you go at an angle scoop
it out really good then you just cut the two eyes the nose and the mouth and that's it. Level two
embellished jack-o'-lantern. The important thing to remember when you're adding embellished details
paying attention to what a face actually does not just plain triangle for an eye but adding maybe
some creases in the corner to show one eye is squinting varying the size to show one eye is
more open. So what I'll do first is go ahead and raise the corner of the mouth up follow the line
that you already established you can even come back carve in the corners that way you get that
crease that you get at the corner of your mouth when you smile really big. Next I want to give
this eye a little bit of a crease here to make it look like it's squinting slightly from the
smile actually bringing the eye outward a little give it a little bit of a curve.
Next to make this eye look like it's actually shut a little bit more than this one
this eye has to be expanded. Another thing you can do is modify the nose just a tiny bit because
as with everything else when your face does something big like smile your nose will change
just a tiny bit just a bit of a sneer. Don't forget if you're carving a pumpkin there's more
than one side if you mess that up turn it around start again turn that side to the wall when you
light it. A really good way to play with any jack-o'-lantern is just add more teeth I find
that's a good answer for pretty much any monster design. And there you have very slightly embellished
jack-o'-lantern the same thing as the first just with a tiny bit more character. For level three
what we're doing is actually trying to make a representation of an image on the pumpkin. Level
three realistic pumpkin. Instead of just carving a triangle and saying that's an eye you're going
to be carving the shapes that light makes when it bounces off an object. It's kind of like the
difference between having a piece of paper and drawing a smiley face on it and then having a
piece of paper and printing out a photograph on it. Start by drawing the image on the pumpkin
and even for people that have been doing this a long time that is always a good step. This design
is going to be kind of a classic European dragon. They're good for Halloween because they're the
angry version of a dragon. One of the other things you have to draw with a marker first is highlights.
Pick a source if you have a face and the light is supposed to be coming from the right side
you're going to be carving out like a spot here and a spot here. Even if it's something imaginary
light still bounces off pretty much the same way. Then cut the top off. Since this pumpkin is bigger
it's going to be a lot thicker. This is a drywall saw you can get it at any hardware store. This
thing goes through pumpkin incredibly well so it'll take the top off very easily. Once again
just get everything out of there. You're going to have to be a little bit more persistent with it.
You want to try to get the pumpkin wall nice and smoothed out and even. Next thing we're going to
do is start carving some of the highlights out of this pumpkin. If you've drawn on here with the
marker there's a good chance that while you're working on it it'll automatically erase a lot
of the marker lines. Pumpkin juice is really good at taking ink off. What I'm doing now is going in
and putting in a little bit of an outline. You want to make sure that you don't carve an outline
and an unbroken line all the way around the piece because then there's nothing but this tiny bit
here supporting all this pumpkin hanging out there. You really have to make sure that you build in
little support systems in here. The tip of the horn doesn't necessarily have to be showing. It's
implied. You know it's there. Same thing with the tongue. That's the whole reason that tongue is
there in the first place. Otherwise the pumpkin is almost certainly going to break on you. Now this
is at an early stage. It's almost an abstraction of drag. The more detail you add to it the more
pronounced it's going to get. So the next steps you're going to start to see this thing take
shape a lot more. Level four. Adding a background. This level is much more complex because by adding
a background you're telling more of a story and it takes a lot more thought and possibly a few more
tricks like perspective. You want to make sure that when you draw your background you account
for the connection spots. You want to make sure those lines connect into that so you still maintain
that kind of support. Then you just go ahead and cut out whatever it is you've decided on.
At this point you really want to be using like a fine saw if you're trying to get this kind of
detail. The main thing is take your time. Remember the more you cut away the more flimsy the pumpkin
becomes. This thing is round so it's an organic shape. It'll display organic shapes more easily.
For the dragon I'm going to put him in a cave, a hallway, or a room. That involves carving straight
lines. Problem is if you try to carve a straight line across the pumpkin from certain angles it
will always look like it's bent. With an organic background you got a little more room to play
with. You can view it from over here or over here and it still looks essentially the same.
Now you can see with level four by adding a background it really makes the detail pop on
this because you've got a contrast of the dark shape here with the bright background.
And some of the later levels we can go in and add a little bit of detail and a little bit of
definition because right now this is still a very simplified version of this scene. For the next
level let's increase the detail. Level five, layered carving. You want to get the most out of whatever
image that you've chosen and to do that you really need to work with more than just black and white.
The outer rind of a pumpkin is opaque. That's what blocks the light. If you shave off just that dark
layer of skin the pumpkin meat underneath is actually translucent. You put a light behind it
it'll still show through. You'll have a nice range of shades you can go through. The deeper you carve
the brighter it gets. I'm going to start off by working on the dragon itself. I want to make sure
that I get all the highlights right where I want them to be and any place where there's going to be
a really dark section you can just leave the rind on that surface. Whereas with a regular sculpture
where you carve in that's where the shadow is going to be, it's reverse. You're essentially
carving in negative. You now have to find the right tool and just shave off different layers
of the pumpkin. These are wands that I've made myself and it's just a bristle from a street
sweeper that came off. Oddly enough these things are made of really really good high carbon steel
so they actually sharpen up and last better than the store-bought ones and then just a stick. I
think this used to be part of a Christmas tree. Obviously this one will cut out a round shape
whereas this one will give you a nice sharp line. You can't just go to the art store and buy a
little pack of loop tools. You probably are going to have to sharpen them up first because you need
something with a good edge to go through a pumpkin. It's very fibrous and it'll like to rip
apart and fray. Now I finished with this level so I've added a little bit more detail to the face,
added scales, highlighted the teeth and gave the background a little bit more definition. But I'm
sure we can get a bit more detail in this so let's move on to the next level. Level six, back carving.
We're adding complexity to this by carving on the inside. A tricky technique because you're carving
without being able to see exactly what you're doing. So you're essentially working blind. I'm
going to be using this technique on the dragon to highlight the top of the neck because it's
going to be covered in scale detail and once that's in there it's a lot easier to go in and
do large scale highlights from the back than it is to try to go in and carve out each individual
little scale that I think needs to be brighter. The details I'm trying to highlight are the areas
where the light would be strongest. Eye sockets and cheekbones and jaw lines. Those are things
that we look at and it helps us read a face just a little bit faster. For this level you want to
leave the light on especially if you don't have any areas that are cut out and it's just solids
with a bit of the rind shaved off. You really want to have that light on because then your best
guess is going to be based on the shadow that you see through the surface. You're working on
a surface that's curved around your hand. It's a concave surface. With a chisel or a gouge those
tools will go forward and then dig out and if the piece is bending away from it that works really
well. If it's bending into it it's a lot harder to get that to curve so loop tools are a better way
to go. And now that we're done you can see kind of the highlights along the scales any place where
the light is supposed to hit it and a little bit along the mouth to define it a bit along the horn
and the cheekbones. If you're doing a detailed piece the easiest way to go ahead and hack off
a lot and give you really strong highlights in broad areas is just to go through the back and
carve it out after you've fleshed out the details. If you've done it right you should end up with a
pumpkin that you're pretty happy with. If not you end up with something that you can throw in your
neighbor's yard. Next we're going to move into a new pumpkin to show you some more complex levels
of pumpkin carving. Level seven, three-dimensional carving. 3D carving is carving the pumpkin like
you're sculpting a piece of stone or carving a piece of wood. You really have to know the object
in three dimensions. If you're carving a face you need to know about how far the nose comes out from
the face how deep the eyes sink in. Shadow is going to form just due to the way that light falls on
this actual object now. It can be very much equal to or for some people easier to do but this is
going to draw on skills that most people have never used when carving a pumpkin. First you want
to make sure you get the rind off so you have a nice blank canvas to work with. I'm choosing to
carve a monster into this pumpkin pretty much because of the shape of this pumpkin because this
has this nice knob here that very easily becomes a head. Places where it's flat are where the pumpkin
is at its thinnest. Flat parts lends itself well to lit carving. The curvier it is the more it lends
itself to sculpting. The next step is sketch out a basic design not with a marker but with the end
of a loop tool. Since you're going to be carving all these details back further any lines that you
make here are going to disappear anyway. I'm carving and taking meat out here to create a
shadow underneath something whereas with carving I'm carving that meat out to create a highlight.
As you're carving into the pumpkin you want to feel every once in a while how soft the pumpkin is.
Once you really start to get through the pumpkin wall it'll give a little bit more and you'll be
able to feel the fibers of the pumpkin and you know that you don't want to carve any deeper into
that area. This is a foam rasp you can find that in any hardware store. This will take off small
layers at a time. The curve under the cheekbone that goes down into the jaw line this is an
excellent tool to get that nice subtle curve because sometimes you put a loop tool in there
and drag it and it's going to take off a bit more than you want. Now this little tool is good for
getting very fine detail and as the sculpture goes on you're going to progress from larger
tools down to smaller ones. You want ones that pop some of the extra little pieces out and remember
with the embellished jack-o'-lantern I turned the corner up to give it more of a sneer and you could
tell that's what's going on here. The same ideas of observation and memorizing exactly what the
corners of the mouth do. That being said this is a totally different process. You have to use loop
tools to kind of carve out where the eyes are and then recess them and sculpt them out exactly how
you want them to look. Going into the next level we're going to be using the whole form of this
pumpkin to kind of describe this scene as opposed to the previous pumpkins where we've just been
using a single side. Level eight, sculpting a background. Adding a background is going to be
very different than the background we added in the previous levels. You're cutting into the pumpkin
as much as you can to push that background back but not so deep that you're cutting all the way
through the pumpkin. The tools that we're going to be using are going to be the same as the previous
step. Now what I'm doing with this is kind of letting the pumpkin dictate what exactly should
be carved. By that I mean I'm just kind of paying attention to the natural shape of it. Because of
this bulge here and the way it sticks out it automatically makes me think of a shoulder. You
have to take the whole thing into account pretty much at all times. The very least until you get
everything basically roughed out you really can't focus in on one small spot. What I'm doing right
now is trying to separate the head from the background of the pumpkin and by doing that
also help define the shoulder a little bit. That foam rasp is going to become very important because
one of the easiest ways to uniformly push back that pumpkin wall so the subject stands forward
is to take that rasp and just keep shaving down and shaving down and do it a little bit at a time.
It can be a bit tedious but it's better to do that than to accidentally punch all the way through the
pumpkin. You don't even have to go all the way through but you could hit a layer of pumpkin that
is almost uncarveable. It will be very very fibrous and very loose and as soon as you try to
pull the tool across it it'll just fray and break apart. That gives you an idea of what you're trying
to do when you make a background. Adds a little bit more to our guy here including a nice little
tattoo because he's a monster but he loves his mom. And as you can see with a three-dimensional
background it allows you to appreciate the pumpkin from more than one angle. With a classic pumpkin
you are pretty much restricted to viewing it from one point of view. Next we're going to increase
the complexity by taking pieces of the pumpkin and adding it to the outside of the pumpkin. Level nine
adding additional pieces. It can be very tricky to do this. Instead of just a foreshortened hand you
actually have a hand coming out from the pumpkin. First thing I'm going to do is cut off some pieces
of pumpkin from the back. All that back that you're not using that's raw materials. You can
use super glue which works surprisingly well especially for small pieces or for larger pieces
you're going to want to use dowel rods to give the extra piece a bit of support and sink it in. It
becomes very breakable so it's not only something to sink into the pumpkin to keep it in place.
A dowel rod is also there to reinforce the piece that you're attaching. At this point I've got the
two small horns shaped. It's a lot easier to shave something down when it's in one whole piece. I've
waited to separate them until the end. Pumpkin is always going to be extremely slippery and using
sharp tools often ones like a rasp that you're often drawing towards you. The tinier the piece
the more of a pain it's going to be to work with. And now I've got to carve into where I'm going to
rest the horns. This is for a couple of reasons. One because you want to sink the pumpkin in there
so it really looks like it is part of the piece. And two if you have a little part where it rests
in it secures better. And these things don't have to be absolutely perfect. Remember he is a monster.
And for the gluing process size up the horns against the head again really make sure that it
fits well. And now you've got a monster with horns. It's something that it's not truly a huge change
but it definitely adds something just a little bit more. I wonder what else we could put on there.
Level 10. 3D carving with light. In this pumpkin I'm going to be adding some light to the eyes.
It's going to be different than adding light to the pumpkins we did in earlier levels because
we no longer have the rind to block that light from coming out. Remember you shaved off the opaque
part of it so the whole pumpkin may light up. The area that I want lit on this is his eye. That seems
like a really cool effect. To do that I need to get to the back of the eye. Easiest way to do that
is that hole that I just cut for the horns. I'm just going to use the saw
widen it out a little bit and you can see now I can reach my hand in there.
You're going to get some gunk all over your arm but you know that happens it's pumpkin carving.
Now what I'm going to do here is reach into the loop tool and shave the back of the eye down just
a little bit. I would do want to make a nice flat spot where I can attach that light. If I push on
the pumpkin I can get a little bit of an idea of where I'm at. To make this light more precise I
need to narrow down its beam a little bit so for that I'm going to be using aluminum foil to block
a good part of it. Just cut the tiniest hole in it so you can really make that light go exactly
where you want it to and you can see how much it's refocused that beam. Put the light in this little
wire bracket that I've made and it'll just stick in place. Okay that works out pretty well. For
classic jack-o-lanterns and some of the previous pumpkins we've carved light is necessary. It's
the thing that makes that jack-o-lantern work. For this light is more of an accent piece. A fun thing
to add on top of everything else because what doesn't look cooler with glowing eyes? Level 11
using multiple pumpkins. This level increases in complexity just by using more materials. You
typically have a core pumpkin and then kind of a sacrificial pumpkin that is there for spare parts
so you can cut pieces off and add it and that's what we're going to be doing here. First I'm going
to draw out exactly what I want on the side of that pumpkin. It's an example of how each level
builds on the skills that you learned in the previous levels and now just cut it out with my
saw. Right now I'm using the rasp to just round off those edges. I don't really want to take anything
off the back. All I'm doing is taking that sharp corner off because it'll look just a little bit
better without that. It doesn't have to be absolutely perfect. This guy is a monster but
he's kind of a cartoon looking monster so it's more fun to keep him slightly silly looking. The
next step is to make sure that these fits exactly how I want them on the core pumpkin. Using big
pieces that's when you start to get into the realm of armature and having things really lock into
place and these are just barbecue skewers you can find pretty much anywhere. You go to the grocery
store and you can find these things. The skewers are going to go from the wing and stick all the
end to the base of the pumpkin. Since this wing is a bit more out than the other wing is, it's a bit
more resistance to staying put. I went ahead and attached them so they weren't even because he's
positioned so one shoulder is raised and the other one is coming down. Typically creatures like us,
we don't stand perfectly rigid and exactly the same on either side and apparently neither do
monsters. Now I'm not going to add any more pieces of pumpkin to this but I'm going to do one last
thing to add one more level of complexity and just pop up the details just a tiny bit more.
Level 12, painting the pumpkin. We've done a great deal of sculpture and work on this thing.
Paint is a great way to accent all that hard work to really make it stand out. Personally I like to
only add a little bit of shadow to get some accent in there because I like people to really see that
no that's that's pumpkin. Even though with the details carved into it you get these nice dark
spots, pumpkin is light and it is translucent so it doesn't necessarily give you these nice
defined shadows quite as defined as you might want them to be. I personally prefer using an
airbrush. I know that's a tool that a lot of people don't have. It's kind of a specialty device
but you can use just acrylic paint and a little brush and get some color in. It is a very wet
surface. Don't be surprised if you come back an hour later and you put your hand on it and the
paint just comes off on your hands because it's not really going to dry on this. Don't worry about
the noise that's just the airbrush compressor pumping itself back up. That's actually pretty
quiet for an airbrush compressor. And now this is our finished pumpkin, handsome as he is. Our
completed pumpkin really builds on everything that we've learned so far in the previous levels.
Once you've learned how to sculpt in three dimensions you really have to nail that realism
at every angle. We've added additional pieces to the outside of the pumpkin. We've used light to
create accents. We've incorporated multiple pumpkins to build this piece up and finally
we've actually used some paints to really punch up some detail and add shadow. Level 13, pushing
the limits. At this point what we're doing is basically just completely showing off. You're
taking the pumpkin and using it not as a pumpkin really anymore just as raw materials. You're often
taking it and turning it into something that no longer resembles pumpkin at all. You're using what
you learned in terms of sculpture, in terms of thickness of the pumpkin, and how sturdy it is,
and attaching it together. The design that I've got for this level is the upper torso of a pumpkin
zombie. Now I've got this steel armature that I've built covered in wire and mesh and I'm going to be
taking pieces of pumpkin and layering it on to that armature. You can't build an armature out
of just like PVC pipe and a dowel rod if you're going to be stacking a lot of pumpkin on it. You
need steel and you need heavy amounts of wood to make sure it can hold. The other problem is those
heavy pieces of pumpkin, they break, they slide off. Pumpkin is slippery, it does all sorts of stuff so
you have to figure out a way to anchor it to that frame. And I've also got servos mounted inside of
the head so we'll be putting pumpkin on top of that and hopefully it'll move once it's all done.
It's trying to do everything that none of these materials want to do. Level 13, breaking every
rule. I based it off of zombie movies that I've seen, Mongolian armor, and just way too much time
spent playing video games and watching horror flicks and happily it all actually works. These
represent my levels of pumpkin carving. Other carvers will certainly have their own interpretation
of what that means but this is what complexity means to me. The future of pumpkin carving is
taking traditional jack-o-lanterns like this, developing new techniques, and building and
trying new things. Very much like we've done here today and it'll just keep progressing
like that into the future. Thank you WIRED.
