Genius Dollar Tree Easter DIYs 🌸Transform These Into High End Easter Decor!

Holiday Decorations
97 followers
#dollartree #diydollartree #Easter2026
Dollar Tree just put out their wooden Easter pieces! Today, I'm sharing Genius ways you can transform these into High End Easter Decor. I hope you enjoy!
Look what just arrived at Dollar Tree,
their thick wood Easter decor.
In today's video, I am sharing some genius ways
to transform these into high-end decor.
I hope you enjoy.
For this project, we are using the bunny and the chick,
and we're gonna make a matching pair
using a really cool technique.
Because I will be painting all sides of these,
I do need to remove those labels,
and I find that it's really easy
to heat it up with my hairdryer
and use that spatula to kind of lift the label up.
I'm gonna paint the chick first,
and I am painting the top part of it
with a yellow acrylic paint.
The color is called Daybreak.
And then I'm going to allow that to dry
so that I can paint the bottom half
with a green paint called Celery.
But of course, you use the two colors of paint that you like.
You'll want to set that to the side and let it dry.
Then we're gonna grab that bunny.
Using that same two colors of paint,
we're just gonna paint some stripes.
They don't have to be perfect.
You don't have to measure them.
Just put the stripes wherever you want them to be.
But you do want to make sure that you dry the paint
in between before you add your second color.
Now, the yellow is a little light,
so I do have to add two coats of that.
And then you're going to want to allow
both of these to completely dry.
I'm gonna paint the outside edges using a white paint,
making sure that I get into all the little nooks
and crannies, and it doesn't matter
if you get a little bit of white paint on the front.
That's okay.
Make sure you get all of the outside edges.
Do the same thing for the bunny.
Then flip that over and add a coat,
or maybe two coats, of white paint on the backside.
This is gonna give it a really beautiful finished look.
And then you'll allow that to dry.
Before flipping these back over to the front,
to the painted side, now you'll want to go ahead
and get your white paint ready,
because we're gonna be adding some school glue.
You just want to add a nice, generous amount.
Maybe not as much as I put on that chick.
So I'm gonna end up having to take some of that off
and put it on the bunny.
But you want to spread that school glue
all over the top of the painted parts.
And then I like to go back and make sure
I use nice, long strokes with the glue,
just kind of going in one direction.
And while that glue is still wet,
after you have them all completely covered,
you'll want to take some white paint.
I'm using white chalk paint,
because it's gonna give it a little bit more
of an added texture.
And I'm gonna go in long strokes,
adding a generous amount of that paint
right on top of that wet glue.
And you'll do the same thing for the bunny,
just going in one continuous stroke.
And while the paint is still wet,
get out a heating tool.
I'm just gonna use my hairdryer.
I'm gonna have it on the highest setting.
I'm gonna go over it slowly,
and it's gonna form the most beautiful,
crackle-finished paint.
And you're gonna see those pops of yellow
and green coming out.
And you'll want to do this for both of them.
You don't want to hold it in one area
very, very long with the hairdryer,
because you don't want to melt the paint.
But you're just gonna kind of go over it
and heat it up, and just watch this completely transform.
If you have any excess glue or paint around the edges,
just take a baby wipe or a dry paper towel
and kind of clean those areas up.
And then I set mine to the side and let it completely dry,
let that glue dry for about 30 to 45 minutes
before taking some sandpaper,
just to make sure I remove any excess glue
that's dried around the edges.
And then I am going to distress mine
just a little bit around the outline of each piece.
And if you do have some glue that kind of clumped up,
you can just lightly go over that with your sandpaper.
Using some twine, some burlap with gold trim ribbon,
and some brown and white plaid,
all of which came from Dollar Tree,
I'm gonna make a very simple little bow
just by folding it over and right in the middle.
I'm gonna pinch that together,
and then wrap it with the twine,
double knot it on the back, and cut my excess twine off.
Then I could cut the tails at a little angle
with the plaid being a little bit shorter than the burlap.
Then I'm going to take some greenery
off of a bundle from Dollar Tree,
and some yellow flowers,
and tuck that in right in the center
between the egg and the chick.
And then I can add my bow right on top
in the center of the flowers.
And then I'm going to hot glue a little daisy
to kind of complete the look right in the middle of the bow.
I created the same kind of bow for the bunny,
but I put the brown on the outside rather than the plaid.
And I'm gonna glue some more of those yellow flowers
and greenery, and add the bow
and another daisy right in the center.
We're gonna give this Dollar Tree carrot a makeover.
It does have some rough edges around it,
so I am gonna go around that with some sandpaper.
For the bottom, I'm gonna paint this with two coats
of a beautiful spiced pumpkin paint.
I love this color.
It has a hint of brown in it,
and when it dries, it's just absolutely gorgeous.
I am also going to paint all of the outside edging
at the bottom of the carrot, as well as the back,
because we want this to be completely finished on all sides.
Once it dries, we are going to then start
on the top of the carrot, and I'm gonna paint that
with some wave of glaze chalk paint in the color moss,
again, painting the front, all of the sides, and the back.
Once you have allowed that to completely dry,
this next step is optional.
I am gonna take some antique wax and a wet baby wipe
to go around the edging of this entire carrot
to kind of bring it out.
It just gives it a little bit more character.
It does dinge it up a little bit,
so if you don't like that,
you can just always skip this part,
but I just think it really brings the outline out,
and it's absolutely gorgeous.
Then I have this wooden tag.
I have no idea where I got it from.
I just have a few of them on hand.
If you don't have wooden tags,
you could always use a piece of cardboard
or a piece of craft paper and cut this shape out.
I am gonna go over this with some of that antique wax
and then blend it in and wait for that to completely dry.
Using a fine tip Sharpie marker,
I'm going to write bunny bait,
and I'm just gonna make little dots
at the top and bottom of each of the letters,
so it's gonna look a little bit like this.
Then I wanna make a messy bow,
so I'm gonna use some lace ribbon, burlap,
plaid, and some carrot ribbon, all from Dollar Tree.
I'm also gonna use some hula skirt
from Dollar Tree and some twine.
I'm gonna cut down three pieces of each of the ribbon
at about six inches,
and then also cut that hula skirt down,
kind of doubling it up.
You'll take your piece of twine.
I'm gonna add the hula skirt first.
Then I will start crisscrossing the ribbon in a pattern,
so I'm starting off with the carrots,
the burlap, the plaid, and then the lace,
and I'll repeat that
till I have all my pieces of ribbon on there.
Then I'll tie the twine.
Make sure that you pull it super tight
and then double knot it.
Cut that excess twine off,
and I can now glue this to the carrot.
I'm gonna glue it right between the green and the orange,
and then I will add that little wooden tag
right below the ribbon using some hot glue,
and I have the cutest little brown button
that I thought matched perfectly
to hot glue right in the center of the bow,
and if you need to, once you kind of flip it over,
because this sits up sideways,
you can trim some of that excess ribbon off
to kind of shape your bow.
Dollar Tree has a couple different shapes of these bunnies,
so we're gonna use this tall one for this project
and some scrapbook paper from Hobby Lobby.
I am gonna trace this on the back of the scrapbook paper
and then cut this down with my scissors.
I am gonna cut it a little bit larger
than what I traced out because I wanna make sure
I have enough paper to cover the bunny.
Then I can take a layer of Mod Podge
and go over the entire top part of this,
making sure I get an even coat
and all the way to the edges.
If your scrapbook paper's fairly thick,
you could go ahead and add it to the wet Mod Podge,
but I made sure to let mine go ahead and dry
because I like to iron mine on.
This really does prevent any type of wrinkles or bubbling,
and I do have a piece of parchment paper on there
just to protect my iron.
I'm gonna go over the entire piece
and allow it to cool down,
and then I'm going to use an X-Acto knife
to trim around to remove the excess paper.
This was the first time I kinda did the X-Acto knife thing
because I typically just sand it,
and I wish I had just sanded it anyway
because this was really time-consuming
and I ended up going with the sandpaper around it
to make sure everything was clean,
and I also noticed that as I was pulling pieces off,
I ripped some of the paper in the front,
but that's okay, I am gonna fix that.
Using antique wax and a dry brush,
I am gonna wipe most of the antique wax off the brush
and then just go around the outline of the bunny.
This is really gonna kinda bring it out,
but it's also gonna help blend in
some of those imperfections on the front,
and I did make it a little bit darker
in some areas than others,
and then I'll allow that to dry.
I made a sweet little lace bow
from some lace ribbon from Dollar Tree,
and once I glue that on there,
I'm gonna cut those tails at an angle,
and then taking a piece of burlap ribbon
and another piece of that lace ribbon,
I am gonna glue the lace on top of the burlap,
and then I can cut the wires off of the edge
because the lace is gonna hold
all those little pieces together.
Then I can glue this on the front of the bunny,
and then I took a little yellow flower,
this is a paper flower from Hobby Lobby,
and glue that in the center of the bow.
You could stop there,
but I did not like the way the outside edge looked.
It just felt a little off to me,
so I am going to go around the outside
and the back with some white paint,
but I'm not going for full coverage.
I do still want some of that brown to peek through
to kinda blend in with the antique wax
that I put around the edge.
This Dollar Tree wooden egg project
is one of the easiest projects to do,
but it turns out to be my absolute favorite,
and I'll show you why in just a minute.
First, I need to go ahead and add a coat of white paint
to the front of it, trying not to get it on the edges,
and I'm gonna allow that to thoroughly dry.
Then I'm gonna add a layer of Mod Podge
all over the top of that white paint,
bringing it all the way to the edge,
and allow that to completely dry.
I have created a gorgeous watercolor Easter printable.
This is available for purchase on my website,
and the link to my website is in my description box below
if you're interested.
This is absolutely precious.
It has the wooden cross, a baby lamb,
and at the bottom it says he is risen.
So I am going to go ahead and center this up
on the front of the egg.
Set a piece of parchment paper down,
and then go over this with my mini iron,
set on about 365 to adhere this paper to the egg.
I did print this out on just plain copy paper,
but I am using that parchment paper to make sure
that none of the ink bleeds off onto my iron.
You want to allow that to completely cool off,
and the next step is optional.
I did want to protect the ink,
so I'm adding a layer of Mod Podge.
I did not put the Mod Podge just directly
on top of the paper.
I put it on a plate,
and I'm using a dry, clean, soft brush
to just apply a little amount at a time,
and then you'll let that completely dry.
It will have a few wrinkles in it, but that's okay,
because once it has completely dry,
you can take your parchment paper,
go back over it with the iron.
Don't let it sit in one spot very long,
because you have that Mod Podge on that top of that paper.
It's gonna stick to the parchment paper,
but it will remove some of those larger wrinkles.
Cut your paper down, and then use a piece of sandpaper
to go around it and really smooth out those edges.
I hope you enjoyed today's projects,
and if you have a favorite,
let me know in the comments section down below,
because I always love to know which one is your favorite.
If you haven't subscribed already,
I would love for you to click that subscribe button
right below the video.
Thank you so much for spending time with me today.
Please take care, and I'll see you guys next time.
