Used CRC Intake cleaner, and here is what happed...Didn't expect that..

Autos hacks
81 followers
Feb 21, 2026
Hello it's Salim Ink. In today's video we will be using intake valve and turbo cleaner from CRC
for cleaning intake valves on this 2018 Nissan Kicks. So previously I cleaned intake valves
with sandblaster but some of you it will be hard because you will need a sandblaster gun,
walnut shell and a compressor. But using cleaner like this will be way easier,
you're just gonna have to spray it from intake and it will do the job for you.
The good thing about these cleaners they are turbo safe so if you have a turbo
and you spray it directly from the turbo it's not gonna damage it and it will clean the intake
valves for you. One thing you should know the cleaner will be better than using sandblaster
because when you are using sandblaster the engine is not running and you have to work on the valves
that close it. But when you are using cleaner the engine has to be running and the valves are
opening and closing and the cleaner will get in contact from the valve edge where it's sitting.
So any debris over there will be dissolved and the valve will be closing properly. Then the
engine will restore its power because when you have a debris between the valve and where it's
sitting the engine will lose its pressure then you will feel the engine not having enough power.
But when you have a contact between the cleaner and the debris it will dissolve that carbon and
then the valve will be sitting properly. So that's a good thing between using cleaner and sandblaster.
So before using any cleaner or intake valves I like to look at it how it's looking before using
cleaner. So for that I have Inscope camera with me and I try to go through throttle body and then
the intake so I can reach the intake valves. But the shape of the intake is a bit complicated I
can't run the camera through to the intake valves. So I'm gonna have to remove the intake and show
you how it looks and then I'm gonna put it back and then use the intake valve cleaner. Removing
intake manifold will be different from car to car. So for this car we have three nuts and two bolts
and one bolt is here. All right the intakes remove it here is the first valve we still can
see bare metal because I cleaned it with sandblaster gun and it was like brand new.
But over time with that oil vapor it accumulated some carbon and burns over there. Here is the
second valve and it's in opening position. Here is the third one just like the first one we still
can see bare metal. Overall it's very light carbons on the valves and here's the last one
very light carbon buildup on the intake valves. So I think it will be easy job for this cleaner
but we're gonna put it in a test and I'll show you exactly how it looks after using cleaner.
All right now we're gonna put everything back and use the cleaner. For using CRC intake valve and
turbo cleaner I'll be following the instructions exactly just like it mentions on the back of the
can. We're gonna start up the engine till it warms up to idling temperature then we're gonna spray
the cleaner from throttle body. But for me I'm not gonna spray it from throttle body I'm gonna be
using this vacuum line and spray it here and the reason for that when I'm spraying from throttle
body the first valve will take so much cleaner and the last valve not getting that much. So I'm gonna
be spraying from this vacuum line and it will be distributing evenly. So after the engine reach
idling temperature we're gonna hold the rpm on 2000 and spray the cleaner. We're gonna be spraying
the whole can and then increase the rpm till 3500 few times and after that we're gonna shut the
engine and let it cool for one hour and after that we're gonna hit the highway to clean all that
carbon. All right now we know what we need let's start up the engine. The hole is a bit bigger than
the straw so I'm gonna take a piece of cloth and put it like this and I can spray it freely.
All right I just used the whole can now we're gonna wait for one hour and then hit the road.
All right it's the next day after using CRC intake valve cleaner and leaving it for one hour
and then hitting the road. Now we're gonna remove the intake so we can see
how well it cleaned the intake valve. All right here is the first valve you might be surprised
because you will say this is before but no it's after using the cleaner. I think the reason for
that maybe I had some resting oil or carbon in the intake and that cleaner washed all that debris
and send it to the intake valves and stayed over there. And here is how it looks before using
cleaner we can see bare metal and it's already dry and clean but after using the cleaner it got
worse. All right here is the second valve there's a difference before using cleaner and after using
cleaner overall when we look at it like this it looks wet and looks like it has more carbon but
if you look at the valve where it's sitting if we compare it with before picture we can see here it
looks jagged and not clean but after using the cleaner it looks more clean and crisp. We also
can see more bare metal which means the valve closing properly now so that's one good thing
with using cleaner and you won't get that benefit with using sandblaster gun. All right here is the
third valve just like the first one we can see it's still wet and oily even though I drive it on
a highway and also in the city and I took the picture the next day but still looks wet and
oily. And here is how it was looking before using the cleaner. Here is the last valve we don't see
big changes except where the valve is sitting it looks more clean and bare metal. It doesn't have
to be completely clean but where the valve is sitting this is the important part. Even the
valve is not looking clean if we compare it with before pictures but the car responding way better
than before. All right I just cleaned where the gasket is sitting now we're gonna put the intake
back and we are done. It cleans some of that but I was expecting way better result because
the carbon buildup was very light and it wasn't heavy so that's the result you should expect if
you have a light carbon on the valves but if it's heavy like this it's not gonna do anything. The
good thing about using CRC intake valve and turbo cleaner you can spray the cleaner while the engine
is running you don't have to remove the intake I did that just for the video so I can show you
better picture how the valve looking before using the cleaner but you don't have to do that. That
was my honest review and testing on CRC intake valve and turbo cleaner. Share your experience
if you have used CRC intake valve cleaner and took a photo before and after using the cleaner. Let me
know if you had better result. All the products and the tools will be in the video description
box below. Hope you guys found the video useful and learned something new. If it was like and
subscribe if you haven't already and I will see you in the next one. Bye for now.
