NEW Axial SCX10 III Toyota SR5 But Somethings Different

RC- Car
12 followers
Comments are disabled for this video.
I'm pretty excited about this new release.
It's an Axial SCX10 III ready to run.
However, they made some changes that I think you guys are going to be really interested in starting off with the licensed Toyota SR5 body.
They made some tweaks to the axles.
They have a transmission in here that's going to help you navigate the trails better.
The tires feel really good on this truck.
No body clips and the radio system has an interesting green on and off button.
I'll tell you more about that in just a little bit, but let's get this out of the box first.
There's the truck out of the box, really excited about the color.
We're going to go over in just a minute.
But first up, you get the SLT3 radio.
There's that green button again.
You get AA batteries for the radio system, a quick start guide, a little baggie of parts, which includes the shorty battery strap, basic tools, and some extra decals.
Now, let's take a closer look at this rig.
Look at that, RC Drivers, a licensed Toyota SR5 custom truck.
This thing looks awesome.
It's available in two colors, the tan and red, like you saw on the box.
This thing just looks sick.
Now, it's a Lexan body.
They gave us clear windows.
The tint that you're seeing is through the decals, so you could go cut that away if you want to.
I love the ExoCage on this.
ExoCage RC, Joe's probably going to love this truck.
It definitely adds to the rigidity of the body.
There's actually inner structures as well.
Then you get the bed area with all this caging in the back.
And the rear bed panels are separate pieces.
So, if you want to go pull these off, you'll be able to do that.
Got the license plate hanging off the back of the bar.
Tubular rear bumper tucked up nice and tight against the bed sides.
And let me spin it back around to the front because you got a nicely detailed molded front grill.
And the headlights are separate, too, with separate lenses on it, not Lexan.
They're actually molded lenses with LED lights in it from the factory done up right.
They've got marker lights and headlights.
Looks really good lit up.
Did a nice job on that.
And then the taillights, too.
These have LEDs in them and it's just cut nicely into the bed sides.
Looks really good.
I think they did an awesome job with the body.
No body clips.
You see they've got these little plates on the hood and screws.
That's because it has an inner structure that actually has a rock light mounts inside, too.
So, let me get this off.
No body clips again.
They've got this little tab in the back.
You push it in.
You pull the body up.
And this is actually where it gets kind of tricky.
It's a really tight fit.
I've got to push it back, lift up the front, and then slide it out.
You notice there's your wires for the LED lights.
And again, really solid structure.
Good looking body.
Does have a bit of weight to it, though, that you're looking for that lightweight rig.
This body isn't going to help you out, but definitely looks awesome.
Now we're going to get into the SCX-10-3 chassis.
It's got the classic SCX-10-3 stamped steel frame rails and some of the cross bracing looks familiar.
But look at this front bumper, guys.
Got a lot of bracing to it.
The front servo mount area has an extra opening so you can go throw a winch servo in there.
And they even have some of the wire guides with this fixture in the center.
And then moving back, you can see there is your front body mount, which there's a bar on the body that slides right into that.
And then the other part of the body mounting system is integrated into the fuel cell.
Let me just push on this button back here so you can see how it operates.
And then you've got this really stubby rear bumper.
So those bumpers look like they have some really good clearance, especially up in the front.
Then you notice on each side you've got a plate for the electronics and the battery pack and these trail gear sliders.
These look pretty awesome just the way they integrate into the floor pans here.
Nice smooth bottom to it.
Nice transition on the skid as well.
So this thing is built to crawl, I think.
One thing that surprised me was they didn't give us the shock towers from the Coyote and those worked really well.
That truck is pretty awesome.
It's back to the standard stand up style of shock tower.
And we'll get to the suspension in a minute.
Just want to show you guys the battery tray here.
So this is set up right from the factory for a standard long style battery pack.
You could run two 3S in here and it's got this elastomer strap.
And you kind of need two hands to go and get this off.
But as I showed you before, they give you a shorty strap.
So if you want to go probably with a more balanced setup, you can run a shorty pack in here.
You just got to remove the bottom plate with the screws up top.
Slide this rear mount forward and then that battery will tuck right in.
Onto the suspension now.
The coilover shocks that we've seen before, oil filled.
They got the latest Panhard bar mount, which is adjustable.
There's the linkage down to the axle.
And check out that axle, pretty cool looking, right?
We'll get to that in a second as well.
Like that, they have the larger links on here that are tapered.
Those are nice and strong.
Some heavy duty rod ends.
Metal pivot balls on the inside.
So you got plenty of articulation with this setup.
And we got to get into the driveline goodies.
I'll start right over here in the center.
So this has the LC transmission with the DIG in it.
Centered metal gears on the inside, ball bearings.
And for those of you that don't know what a DIG is, this is the DIG setup here.
This is a DIG servo and it locks out the gears on the inside.
It's got a mechanism inside that will lock out the rear end and allow you to drag it.
So basically, if you want to pivot and maneuver on the trail,
you lock the DIG, you turn your wheels, and you pivot to where we want.
It's got the wild board drive shafts down to the axles.
And these are AR45 axles.
However, they have a new housing.
They've got trail gear housings on them.
And this looks really cool, guys.
The pumpkin setup, nice and smooth.
Heavy duty truss bracing on top.
Look at the front of the pumpkin.
It's got a skid down here that allow you to glide over rocks a bit easier.
High pinion.
And they've got metal gears on the inside, of course.
Locking spool.
And then sintered portal gears.
Which were really well greased from the factory.
I was surprised how much grease they packed into them.
Ball bearings throughout the driveline.
So, definitely liking the drive setup on this.
And let's check out all four corners.
They've got licensed Intrico Super Swamper tires in the soft compound like the Coyote had.
And I really liked how those tires hooked up.
So we'll have to see how that goes.
And then they have the Trail Gear Creeper wheels.
These are beadlock style wheel.
I like that they gave us beadlocks on this.
And we'll get into the electronics now.
So, it's got the 683 Spectrum Servo.
Metal gears with a metal servo horn.
35 turn Slickrock brush motor.
Your Spectrum Speed Controller 2-3S with the IC3 plug.
And there is your DIG servo.
The receiver box is water resistant.
And it has the 515 Spectrum receiver in there because it needs all of the ports.
It controls the servo for the steering, the DIG, and the LED lights plus the speed controller.
Now, on to the radio that I was teasing about before.
And it's got this green button.
And that means that this is set up for DIG.
This is going to be for the Axial rigs that have DIG units in them.
That's how you'll be able to identify it.
You just have to push down on the B button or A button here.
And it will lock out that DIG.
All right, guys.
Time to throw the body back on this truck.
And I think I'm going to head to RC Madness.
Well, RC Drivers, winter in full swing.
Everything outside is covered in snow.
All my favorite spots.
There's just no way to run on it.
So, I'm up here at RC Madness in Enfield, Connecticut for their awesome indoor rock crawler course.
If you're anywhere near Enfield, you've got to come check out this spot.
Absolutely awesome place to come to.
And let's just get rolling.
Just got to choose my lines as I go along.
I kind of just worked a few spots so far.
So, I think I know the route I want to take.
We've just got to come right up over the top here.
Got some good suspension movement.
Traction pretty decent so far.
And it looks like I'll have to hit the DIG a little bit right here.
Oh, probably a little too early, but saved it.
Lots of steering travel with this AR-485 portal setup.
Got the universals up front to give you that extra angle action.
There we go.
Worked it smooth through there.
Again, these tires are brand new.
I'm going to let them break in a little bit before critiquing them.
But I think they're going to work out well.
The compound feels really good.
Oh, slider coming into effect right there.
Worked out pretty well.
A little tire bead rollover.
Oh, that could have been messy.
All right, let's come back through here.
A little DIG action just to bring the front end over a little bit.
It locked up just a little bit.
It just hung a little bit on that corner.
Then the DIG let go.
Front end bound up a little bit.
It's trying to wall.
I thought we were going to be dancing on that smooth rock there.
I'm seeing a little bit of roll here.
I wonder if that body weight is really affecting the truck.
But love the suspension working on this.
I thought I wanted those towers from the Coyote,
but maybe these towers work fine with this setup.
Nice.
Going up through the bridges is a must.
Let's kick it over here through.
Oh, this could be a sketchy spot.
There's a pretty deep hole in that rock.
SR5 just muscling through.
I've got a 3200 3S pack in here.
Oh, and it rolled it and turtled it.
I think that high weight kind of hurts a little bit.
Once it starts to go over, it goes over.
I think this just needs a little help right here.
It needs a little extra rock.
I think right there.
All right, let's see.
Is that going to do the trick?
It did it. Look at that.
A little cheat, right?
Up through the incline.
Got some steps in there.
There's always something new with this course.
Now I can hit the DIG, walk that front over.
The wood's pretty slick.
There we go.
Nailed it there.
Hit the DIG again, walk the front over.
See, the DIG's hung up right now.
I don't have my thumb on it.
That's a little issue here.
Actually, it was really stuck.
I had to back out of it there.
Ooh.
It was hung up, so I actually had to hit the button again,
and it worked itself free.
DIG on.
There we go.
Didn't hang up that time.
Yeah, a little random hangups with that.
All right, going through here should be easy.
I want to get this thing on a little bit of a side hill for you,
see how much angle we can get it on.
Look at that. It's already starting to go over.
I don't know if I'm going to be able to save that.
That was a durability test.
I think it's definitely going to benefit from some weight in this truck.
Some weight down low.
Obviously, brass knuckles.
Some brass hanger weights.
There.
This is where I wanted to go.
Hopefully, you guys can see that.
Walk it over. There we go.
So the DIG let go that time.
I'm pretty impressed with this part right here.
I think it's going to go over.
Got to find a better line for it.
There we go. Now I can see what I'm doing.
Nice. Made it.
Love all the bridges that they have set up here.
Just adds to the fun.
Drop it down these rocks.
Show you a little suspension working again.
So the truck, I think it works pretty well.
It's obviously got some limitations here.
Just the usual stuff.
Could use some weight.
The tires, I think, are good.
For just trail fun, they're definitely going to work.
Super Swampers work.
Back it out here. There we go.
Love the log section.
It's just so cool.
Whoever came up with that, nice job.
Pretty good forward progression here.
Lots of steering.
It's an SCX-10-3 when it comes down to it.
I think those new axles are definitely gliding over the rocks a bit better.
Got this wood inclined to contend with.
This is a tire test here.
Just had to find some grip.
A little weaving and walking.
Nice.
Suspension bridge.
And we'll drop it back down.
So what do you guys think?
That was the first run with the SR5.
Squeaky toy tires.
You could hear the air squeezing out of them.
But definitely has a cool look to it.
I think people are going to be excited about the Toyota body, SR5 body.
Watch this.
We'll hit that dig again.
Walking around. There we go.
Once again.
Love that.
See, but it's locked out again.
Look at that.
My thumb's off and the rear's still locking up.
There we go.
Finally let go.
Just had to give it a little blip.
But the rest of the truck, I'm excited about, guys.
I like those trail gear axles.
Those are a definite improvement.
I think a lot of people are going to be swapping housings to those.
Hopefully actually a little stocked up on them.
But cool release from Axial.
Really nice to see the body clips going away.
Real lights on it.
The body's a little difficult to remove.
You kind of got to finesse it to get it off and on.
Let me know what you think of it.
Love it that Axial's given us another body option on the SCX10.3 platform
that isn't a Jeep, and I'm a Jeep guy,
but I think Toyota fans are going to love this SR5,
with its custom look, the cage on it,
the dovetailed rear with the panels that you can remove,
the detail on the front grille and the lenses for all of the lights.
Even the taillights are nicely cut in.
The trail gear bumper up front, plenty of clearance for that.
Same with the rear bumper.
Body overall, nice job.
Just a little finicky to take off, and I'm okay with that
because we don't have any body clips on it.
That's a bonus there.
On to the chassis.
Like the few revisions that they've done,
especially with the trail gear axles,
the bottom of those are a bit smoother, won't catch on the rocks.
I liked the dig option.
However, I didn't like the dig option with how it performed.
It kept locking up on me.
I'm going to try a different servo.
I'm going to throw a Reese in there
just to see if some more servo power unlocks it when I'm done using it,
and we'll see how it goes from there.
Again, this is kind of a first test.
I had to go to the indoor course because it was nothing but snow outside,
and it performed well there.
I'm not going to say it performed excellent.
I think it's going to perform well outdoors
just by what I was seeing in the normal places where I usually run.
We got a good feel for it there, and it definitely has some capability.
Like other crawlers, I think it's going to need some weight,
maybe switch out your tires depending on the type of surface you're running on
because there, there's a lot of smooth rock where these were just kind of spinning.
Again, I'm just thinking to my outdoor areas where I run,
I think this is actually going to hook up pretty well.
For a first look, I'm excited about the truck.
I like what they've done here.
I think it's got plenty of potential for those that want to take it a bit further,
and it's a cool-looking Toyota SR5, guys.
You've got to love that.
Let me know what you think about it in the comments section below,
and I'll have links in the video description.
