Man Says He Can't Unclog Garbage Disposal Then Does It Anyway...Part 3

VideoJoeKnows
63 followers
4 Video Views·Feb 19, 2026
@VideoJoeKnows
Man says he can't unclog garbage disposal then does it anyway...Part 3 is what this DIY howto video is about. VideoJoe is on a mission. His Motha's garbage disposal is clogged & he will not rest until he has the garbage disposal cleared of the clog as well as cleaning everything up when done as well as checking for leaks when all the fittings have been tightened back up & all the stuff is put back under the sink just like he found things. That's the sign of a good average Joe!...making it look like you were never there. Watch & learn as VideoJoeShows you what VideoJoeKnows...man says he can't unclog garbage disposal then does it anyway...Part 3. Nice!
https://www.youtube.com/user/VideoJoeKnows
Hey, when you do how-to handyman projects around the house,
get yourself some sponges.
Look at this.
That's all I found.
I was gonna do the entire thing under here with the sponge.
Then I found this under the sink.
Whenever you have these and you're using these
up above cleaning your dishes and stuff,
when they get old, throw one of these
or a couple of them down below,
down in your cabinet here,
because you never know when you're gonna need this.
Okay?
Now, did I do that on purpose
to make all this water come all over the place
when I had this big tub down here?
No.
Just sometimes that's just what happens
because it was all plugged up like that.
Now, what I could have done
is I could have taken a sponge or a cup or something,
and that's probably what I should have done.
Up here, I could have drained.
I could have gotten a sponge in there
or gotten a little Dixie cup or a small cup, whatever,
and try to get most of that water out of there
before I started taking this trap out, you know?
I'm just lucky I had a big enough tub here.
Look how big that is.
And that's how much water was in there.
I was hoping it wasn't gonna overflow,
but I wouldn't have had as much water in here to clean up
had I just thought about that.
And actually, I'm kind of glad I didn't think about it
because probably you're not gonna think about it,
but now you are because you see what can happen, okay?
If this happens, fine, you know, you can clean it up.
Get yourself a sponge just like I'm doing.
Wipe it all up.
A good thing to remember is you wanna leave things
the way you found them
and make them almost cleaner than you started.
This cabinet bottom had grime on it and stuff,
and now I'm gonna clean up this whole thing,
and it's gonna look nice, fresh, and clean.
Just take your time and do things right.
Once you have everything cleaned up, yeah,
use a towel and dry this out.
Don't leave any water in here
because once you put everything back,
some of it is gonna keep the cabinet bottom from drying.
And then you could have a mark there
if you have white melamine, let's say,
or just a dry particle board down there or whatever, okay?
Dry it up there like that as best you can,
and we're gonna get ready.
And I had some water down in here too,
so I'm gonna dry this up
because I don't wanna slip
as I'm getting back down under there,
finishing tightening up the threads,
and then I've got to put the cabinet doors back on
and that sort of thing.
Step by step, you can do this.
Hey, if I can do it, and average Joe, you can do it.
Okay, now to tighten down this bottom nut here,
and I had the top one.
Hey, you know what?
Wow, I forgot to do the top one here.
And it's got, sometimes you got little nibs on there,
so you can take that with your thumbs and finger back there
and tighten it up as tight as you can
without breaking your thumb.
And if you want, with your channel locks,
you can do one little bit,
you know, like a 16th or so.
This one's pretty tight,
and I'm just gonna take that
and grab it and do just a little bit.
That's it, okay, like that.
Remember, I already had that one tight.
I'm gonna do this one.
That's the hair, like that.
And now this bad boy down here.
I'm gonna get it as tight as I can.
This one doesn't have any of those little nibs.
Okay, it's probably fine,
but I'm gonna try to get just the hair in here.
That's why I like bigger channel locks.
But you see, I got a little bit there.
I'm gonna plug this back in.
And this pipe here is for the drain,
for the dishwasher.
And I'm gonna stick this back down in there
a little bit further, like that.
Make sure you plug this stuff in to the right place.
This white plug or this white extension cord
actually goes across to a garbage trash compactor.
I thought that would keep this down a little bit.
It doesn't really.
This has already got a memory to it.
That's the drain line for the dishwasher.
And it comes over and it gets attached up to the top.
I wasn't gonna show you this,
but it seems as though you're right here.
See, there's your air gap.
So your dishwasher drain goes from the dishwasher.
It comes out and it sneaks around and it ziggles up
and it goes up to that air gap.
And then another pipe goes from there.
Let's see, where is it?
It's up there somewhere.
Where the heck is it?
Ah, look at that.
You know what?
Oh, here it is.
See this one here?
This goes up to that air trap too.
You got the white one going up.
That's the drain to the dishwasher.
It goes up to the top because then it grabs air.
That's called an air gap.
So your dishwasher doesn't go clunk, clunk, clunk.
And then this line here goes over.
And because there's a garbage disposal,
it attaches to the garbage disposal.
Then it drains out of here
and then comes down here to the trap
and on outside the wall.
So when your dishwasher goes on,
lots of times you might hear water in the garbage disposal.
That's why.
Okay, enough of that.
Back down here.
I've got that trap tight pretty much.
Now what I'm gonna do is, is there another step?
Yes, this is what I do.
I'm gonna run water down here.
Let's get this.
Let's get that down there.
I'm just gonna run water in that for a little bit.
What that's doing is it's filling up this trap, okay?
This is gonna be filled up with water
from this point to this point as it goes down.
And what I'm doing now is I'm checking to make sure
nothing is dripping off of here or this one.
Chances are this one's up too high anyways
because see that's higher than the pipe that goes out.
So I probably won't have any water there
unless that were to ever back up.
You know what I mean?
But you still wanna get all this stuff tight
because you don't want it dripping
as the water's flowing through it and all that.
I'm gonna let that run.
I'm gonna see if anything drips here.
I'm gonna leave it for a couple minutes.
While I'm doing that, I'm gonna put these doors back on.
You saw these doors.
Some doors you can take where the hinge is here
and there's a button on the backside.
You can press it and then it pops off.
Well these, of course these don't have that.
There's one screw in the middle of each hinge
and that's what pulls this out.
You gotta make sure you do the right screw
because there's other screws.
There's a screw back here to adjust your cabinet door
back and forth this way.
And you've got one here that will also adjust, okay?
So you have two adjusting screws for your cabinet doors
and this is the only one that tightens up.
So see, I've got two cabinet doors here
and here's my four little screws, see?
So I'm gonna put that back on
and yes, you can readjust your cabinet doors.
You got cabinet doors that go together in the middle.
See, here we don't.
Here there's a style in between each cabinet door.
See this?
That's called a style.
So these are individual
but sometimes if you don't have that style
and these two doors are side by side here,
one's up a little bit higher than the other one.
It's at an angle, one's rubbing.
You can generally, you can adjust the hinges right here.
Now, you know.
If you're still watching this,
I only pointed to the top hinges
but see, you've got the bottom hinge too.
So you can adjust the bottom ones too.
So if one cabinet door needs to get pushed over
to the right at the top
and let's say it's not going over all the way,
maybe you need to take the bottom
and slide it, adjust the cabinet door
so it's going over to the left at the bottom,
over to the right at the top.
If they're not lined up,
you can loosen up the mounting screw
and you can raise, generally you can raise these up
or down that way too.
So there's all kinds of things you can do
with these cabinet doors.
Now, there's no excuse for your cabinet doors
in your kitchen or your bathrooms
or your storage areas to not be looking
and working properly.
I'm still running, checking for leaks.
And after I put the cabinet doors on,
I closed the doors like that.
And I could have remembered exactly where they were before
but see how the height is pretty much the same now.
After I put this one in,
I remembered this one,
the hinges were shoved right down on top of the screws.
So I made this one the same
and then I closed the doors.
This one was way down too low.
So I undid the mounting screws,
you know, the ones that I just put in
and I lifted the cabinet door up
and sure enough, it went up about a quarter inch
and then I tightened it back down.
I made sure that this one was pushed down as far as it was.
This cabinet door had to be pushed up as far
and then it lined up.
Okay, so to do some, you know,
don't just put the cabinet doors back on,
screw them, say, okay, that's fine.
That's how they were before.
Check it all out, make it look right.
This is all nicely cleaned out now.
I'm gonna clean out, you know, just the green stuff here
and throw that away.
And I'm checking for leaks and this right here,
you can take a paper towel,
shine your flashlight down there,
feel on there and see if there's any water.
And if you think there's some water,
you can dry your, use your rag by the way,
dry this up and after we put this trap back on,
the trap had water on it.
Okay, make sure there's no water visible on there
because if something drips, you might think,
oh shoot, it's dripping.
And maybe it's just a little bit of water that was on here
and it trickled down to here and then it dripped.
Because I felt some dampness right there just then
and I think that's maybe what happened.
And so I'm gonna keep running it.
I'm gonna check it out again here
before I try to tighten this up anymore.
Okay, if you do experience a leak
and you tighten this about as tight as you think you can
before you crack that, you know, you could,
you might have to take the trap back off
and put some Teflon tape on the threads.
Now this video, I'm not just gonna show you
how to put Teflon tape on.
I'm hoping, actually I don't have to do that.
I shouldn't have to, but you know,
when you start working with things
that are 10 to 15 years old,
sometimes you have to do different things.
So if this keeps dripping, I'd have to pull this off,
wrap the threads on the top part with Teflon tape
going in the same direction as the nut,
as I tighten up the nut and then put it all back on there.
I could have done that initially,
but lots of times, you know, sometimes I don't,
sometimes I do.
So if you have Teflon tape
and you wanna go through the effort
to do that on all your threads, you can.
Or put it up and tighten it all up
and then do your water test like I'm doing now
and see what happens.
Because the last thing you want is to call,
just to say, oh yeah, you know what?
It's fine.
I've got as tight as I can.
Video Joe says it should be fine.
And then later on, you come underneath the sink
and it's been dripping.
One drip every, you know, 20 seconds or something.
And now you've got this nice little indentation here
in your particle board or your melamine
where you start smelling musty smell there.
And it's not, you know,
it's all because the nut needed to have Teflon tape on it
or it wasn't tight enough.
Or maybe it had a hairline crack in it and you didn't know.
You know, it could be all kinds of stuff.
So make sure before you call it 100%,
do the water test.
Yes, it's all about tips.
See this hat right here?
Looks pretty clean, doesn't it?
When you have your hats, when they get dirty,
throw them in the dishwasher.
Make sure you put it in there nicely.
Don't put it over something else.
And you know what?
In some places, some stores, I don't know where exactly,
they have this thing that you can put your hat in,
a little plastic tray thing,
and then you can fold it over there
and kind of snap it and then throw it in.
But I just leave it like this.
And then after the regular cycle,
even after the heating cycle, you can pull it out.
I did it after the regular cleaning cycle
and now it's all clean.
I'm just gonna set it here and let it dry.
I've seen people actually put it in the washing machine too,
but then it's gonna, I don't know,
it might mark it up a little bit
or it might not last as long.
It might get out of shape or whatever,
but I wouldn't recommend throwing it in a dryer or anything.
Okay, there's a tip for you.
Now that I got that sink unplugged and fixed,
what am I gonna show you next time?
Hmm.
Maybe we'll talk about these cabinet knobs,
these cabinet handles.
Doesn't that look nice?
I've got some tips.
I'm not gonna show you how to install anything
because all of these are here.
But believe it or not,
none of these were here on these cabinets.
These cabinets are over 12 years old.
You would think there's a finger pole underneath here
to pull these cabinet doors, drawers out,
the cabinet doors, nothing.
There's no poles.
So before these were installed,
you had to put your fingers under there.
And look, this was a heavy cabinet door drawer
because of all the silverware and stuff.
I hated opening that up every time coming to see mother,
but Momi and I, we put these on and we put these on
and I'll show you,
I'll talk to you a little bit more about that.
It's not just about screwing some handles on.
There's lots of things you have to take into consideration.
And I'll talk about that next time.
Hey, well, that's all the time I have for this time.
But I'll be back with more videos.
