In my endeavors to create a new set of undergarments for the turn of the century/early Edwardian period, I have so far made a corset and combinations. I will link those videos below. However, the journey was not complete. While researching the Edwardian silhouette, I came across this wonderful blog post by Atelier Nostalgia: https://ateliernostalgia.wordpress.co... This blog post was a GOD SEND and it features such wonderful comparisons between the different undergarments and their effect.
This was the last push I needed to make a bust improver. My bust size is quite small so I thought it was the help I needed for that perfect silhouette. This was a very quick and easy project, I drafted my own pattern based on an extant bust improver from the LACMA museum (https://collections.lacma.org/node/21....
Hi everyone and welcome to a new video. In my endeavor to create new Edwardian undergarments
I came across bust improvers. These have been around for decades and were used to improve the
silhouette, particularly for turn of the century into that pigeon look. Mine is based on an example
from the LACMA museum. I also found this wonderful blog post by Atelier Nostalgia,
which I'll link down below, that explores the silhouette. My materials for this were lace,
some plain cotton and polyester filling. Of course these aren't accurate but they would
serve my purpose well. To start off I draped the rough shape on my dress form. The shape
consists of a pad like structure with two oval shapes that are filled. I will leave a link down
below to my pattern. Please keep in mind that this works for me but might need a judgment if
you choose to use it. I cut the large central piece on the fold and then cut two of the circles.
I added a half an inch seam allowance to the oval shapes only as a large pad shape
would be bound and did need a seam allowance. The next step was to turn under the raw edges
of the circles. I pinned them in place and then hand basted them. Using an iron and lots of steam
you can reduce the bulkiness of the circle hemming and make it lay nicer. I didn't have
quite the right type of lace for this so instead I sewed two different laces together into one
continuous piece. Then I sewed a row of gathering stitches just by setting the stitch length on my
machine to its longest setting. This is then gathered to fit the oval shape. To gather you
need to pull on the bobbin thread and then spread out the gathers nicely. I usually make sure one
end of the stitches is secure by knotting or wrapping them around a pin and then start gathering.
This ensures you won't accidentally pull out the threads which has happened to me. I then pinned it
onto the oval shape. I used my machine to carefully sew the lace onto the oval shapes and then removed
my basting stitches. I moved on to working on the pad. I forgot to mention but I also cut out the
pad shape from one layer of cotton. A denser cotton than my original one because I thought the original
one was too lightweight and it needed a little bit more structure. So I basted these two together
around the edges to make them into one layer of fabric. I started by binding all the edges with
bias tape for a clean finish. I wasn't worried about top stitching on this so I used my iron to
fold my bias tape in half and help shape into curves. Then I simply fitted around the raw edges,
pinned in place and sewed down by machine. This took a little while due to the corners.
I then repeated the same process for the lace on the oval shapes and used that lace for the top
edge of the pad. I arranged the gathers, pinned it into place and then sewed it down by machine.
I pinned the oval shapes into place on the pad and sewed them down by machine.
I left a one to two inch gap at the bottom edge so I could get the stuffing in. I used polyester
toy stuffing for this. I rolled small chunks between my hands to make them a little denser
and then stuffed them into the oval shapes. I pressed down occasionally to better distribute
the filling until I was happy with the size. I then used the whip stitch by hand to close the
gap at the bottom. And that was that! It was a really nifty quick project and I think it looks
great. Stay tuned to see what will go over it. Thank you for watching!