Hands-On with GFX ETERNA 55 Chapter 3 "Project Setting Menu" / FUJIFILM

CinePhoto Lab
14 followers
#fujifilm #gfxeterna #filmmaking
Michael from Fujifilm North America guides you through the project setting menu of GFX ETERNA 55.
GFX ETERNA 55 : https://www.fujifilm-x.com/products/c...
Learn more about FUJIFILM X Series & GFX : https://www.fujifilm-x.com
Hello and welcome to the third chapter of Hands-On with Fujifilm GFX Eterna 55.
Today we're going to very quickly talk about the project settings menu which is very very important.
So when we enter the project settings menu the first thing that you will see up there is
something that is called image format. Image format is basically the area of the sensor
that you're going to be capturing and tied in with that you then get other options for aspect
ratios and frame rates. The different choices you have for image format are things like GF and that
is the full width of the sensor. There is premista and that is a slightly smaller image area that is
specifically oriented for the Fujinon premista line of zoom lenses and then you will see 35
millimeter and you'll also see super 35 millimeter. So those are the corresponding image areas for
those different sizes. So if you have lenses that were designed for super 35 you would put the
camera into the super 35 mode and if you have large format lenses or old legacy say converted
medium format still photography lenses that are very popular now then you could use the GF mode.
The important thing is that you need to match the lens coverage with whatever image format you choose.
Underneath that is an item called resolution. So this will change as I said depending on the
image format that you selected and here you can choose the 4k open gate for GF you can do
16 by 9 17 by 9 HD and then there's different resolutions such as 4k 5.8k and those again
will change depending on the image format. Project FPS. So this is what you're going to be editing
in or what you're going to be distributing in. So you might be recording in one frame rate
and your project FPS might be something else. For example if you're going to do slow motion
you might choose a project FPS of 24 but you might actually do a recording FPS of 48 frames
a second or 60 frames per second and that is how you get slow-mo. Other items in here that are
important to pay attention to is going to be this one F-Log HLG and this is quite important because
this is going to determine the tone curve and dictate the amount of dynamic range that you
will get in your recorded file. So you do have one option which is called film simulation.
If you choose film simulation this will keep your recording in the rec 709 color space but
it gives you the option to then choose in the film simulation menu the different Fujifilm film
simulations that we have included in the camera body. There are 20 of them built into the camera
body. These are very very pretty very beautiful and these are ways to get basically a graded
look that you pre-select ahead of time instead of using a log tone curve that you need to color
correct later. So in that F-Log choice now if I don't choose film simulation I have F-Log 2,
regular F-Log and F-Log 2C. F-Log 2 and F-Log 2C are the same tone curve they're the same dynamic
range but what's different about them is the color gamut the color space that they utilize.
So F-Log 2 uses the F gamut color space and that is equal to rec 2020. F-Log 2C however
makes use of the F gamut C color space that Fujifilm developed to give you extended range
in color capture. So it is 80 percent of the theoretical color space known as ACES. It's
almost a range of human vision. So we did that in order to give you far better color accuracy
and color reproduction when you get into post-production. And lastly you can choose HLG
which stands for hybrid log gamma and that is sort of a combination of a rec 709 look
in the shadow areas and then more of a log look as you get up into the mid-tones
and highlights. Farther down in the project setting menu you will come across the media
rec setting and this is quite important. So under rec media is your choice of your destination of
where you want your recordings to go. Slot one is the CFexpress type B card. Slot two is a SD
card. You'll also see options for backup and sequential and SSD so the solid state drive.
On the back of the camera is a USB-C port that we've talked about before. When you plug in an
SSD drive into that the camera will automatically detect it and it will start recording to that.
You will need to format initialize your SSD from the camera when you plug that into the USB-C.
Next line down is file formats. You have two choices of recording containers. One is MXF
which gives you more choices for more extended metadata and the other is the MOV file container
which is very common across many many cameras. The media rec setting line gives you your choice of
compression your codec. So here you have H.265 all intra or GOP and then you also have ProRes HQ,
ProRes 422 and ProRes LT. The last thing in that item is going to be proxy. So you can choose
whether to have proxies or not. This only works if you have ProRes enabled to begin with and your
proxy choices are H.264 or ProRes proxy. Now these will be recorded to the CFexpress type B card
in a separate folder that is called proxy. The next item down is called clip setting.
The first thing you'll come across is the camera ID and this is where you determine
which camera you're recording to. Typically on a motion picture set the cameras are given letter
names A, B, C, D etc. A camera tends to be the most commonly used camera throughout the production
or it's the primary camera that's usually for the main actor but this is where you decide the
lettering that is going to start the file naming sequence. So this letter that you choose here
will be the first character in the file name for all the files that you record on that camera.
And the second thing is real number. The real number here starts with one and it will count up
one, two, three, four. It'll be sequential as you put new memory cards into the camera throughout
the duration of your project. So that's it. That covers all the important things in the
settings. Thank you for joining me.
