Metal Captain America Shield DIY Tutorial Avengers Endgame

Shielded Dynasty Network
2 followers
2 Video Views·Feb 8, 2026
Hey guys, did you see how cool, actually how stupid I look in this outfit because I have the mumps?
It's Brandon Redd here with Ramen Noodle Budgets.
If you've never watched this channel before, you're completely new.
My name is, like I said, Brandon Redd.
And this is Ramen Noodle Budgets, the channel where we try and make things as cheap as possible
from movies, blah blah blah blah blah, I don't know what I'm trying to say here.
In today's tutorial, I'm going to be doing a tutorial I did five...
I want to say five years ago, but I could be completely wrong there.
The reason I'm redoing this tutorial is I was actually going through Walmart the other day
and I noticed they actually sold Flexible Flyer Steel Saucer Sleds,
which I've never in my life actually seen in a store.
The only place I've ever gotten them is online.
So I picked one up, it was $29.99, which is a lot cheaper than a lot of other online websites
I've been selling them for, they've been like upwards of $40 to $50.
So I'm like, let me grab one, and I decided to make another shield.
Now, this shield, in my opinion, is 100 million times better than the first one I did in that video tutorial,
mainly because it has an engraved star, the clear coat is so glossy and extremely durable,
I'll talk all about that in the video.
And the strapping system is different, and we're going to talk about that at the end.
It's kind of similar to my really expensive shield tutorial.
Now before I begin, everyone freaks out in the comments whenever I give a price tag of the main piece.
They're like, you have to spend so much money on the paint, you have to spend so much money on blah blah blah blah,
whatever I use in this video.
The reason I say the price tag is $30 on this is because real shield blanks that we use for Captain America cosplay
and shields like I have in my past videos cost upwards of $150 to even like $600,
depending on how accurate you want the shield.
$30 for a base metal shield is extremely, extremely cheap,
and a really good project if you guys are starting out in doing really anything.
And yes, I am going to be talking again in this video,
because a lot of people were really upset that I stopped talking in the last video.
So if you hate that, sorry, the majority of people want me to speak.
So let's get started on this tutorial, and I hope you guys enjoy it.
So now that we cut the straps off, we have to find the exact center of the sled
so that we can start making our main pole to do a whole bunch of stuff later on.
So I'm going to start off by measuring across.
I'm not 100%. I don't remember exactly what the length of this is.
It looks like about 27 inches from the inside of the rim to the inside of the rim.
And the way I'm doing this is the outside of the leftmost handle hole here.
And you can't see, but then on the right side on the outside of it too,
you get a diagonal across kind of center point.
And I believe we're going to want to put the center hole on.
It's like going to be in between, so it'll be hard to explain,
but I'll show you guys in a sec.
So what I did is with a fine point pen that is actually able to write on metal,
I made a really small point here.
And what I did was, like I said, I went to the inner.
So this time I did the innermost of my left here and then went to there.
And I got 27 inches, so I did 13.5 in the center right there.
And the way I can test, or the way you can test if this is a direct center
is taking your measuring tape and seeing if it's 13.5 in a majority of different spots.
That's kind of a rough way to test if it is the center.
You can also kind of just tell if it is the center or not.
But that's the way I go about doing it.
I'm sure there's a whole bunch of other ways to get the exact center of the sled,
but that's how I do it.
So the next thing we're actually going to do is drill with a small drill bit.
I'm actually not sure how small this exactly is.
It doesn't really matter because it's going to be covered up with an aluminum star later.
But you do want it big enough to accommodate the nail you're going to be using to make the circles later on.
And don't make it too big so that the nail is kind of wiggling around all over the place
or else you'll have wonky circles later on.
So we're just going to quickly and slowly drill this into our sled like that.
And if you're wondering what I have this placed on, this is actually a trash can down here.
It works really great because it keeps it stand up and it's not wiggling all over the place.
All right, so now that we know where we have our hole drilled and everything, we have our center,
what I'm going to do is, taking my measuring tape, measure down to see how far I can go
close to these two handle holes.
And so it seems like it's about 12 1⁄2 way down,
but since there could be some error from the exact center,
I'm just going to call it safe and do 12 1⁄4 inches.
And what I'm going to do is, I'm going to get a piece of cardboard
and then I'm going to put a nail down, measuring from the nail,
I'm going to measure down 12 1⁄4 inches to get my radius that I'm going to then spin
to create the line that we're going to have to cut off with a jigsaw.
So let's do that really quick.
All right, so I've acquired my piece of cardboard.
It's actually just a long piece I cut off of a force effects light saber box.
And obviously we're going to use the clean side.
So as you can see, when you put a nail in the hole there,
because there's a little nail I put inside this,
we're going to have the line and we're going to be able to spin it
and create the line for the circle to cut with a jigsaw.
So I'm going to measure 12 1⁄4 inch down and then mark it
and then stick my pen through it.
So I'll show you guys that.
Okay, so the next thing we're going to do is actually cut the shield
for the shield shape out with a jigsaw.
Make sure you have a metal blade, or specifically for using metal.
Also, you really stay with it.
I don't allow people to try using wood blades on this
and it gets messed up and just broken on them.
Also, try to use safety equipment. I'm not.
That's so stupid.
So there are holes down here where we took the handles out.
That's where you're going to put the blade in and start.
So I'm going to actually have to probably move in a second,
but I can show you guys.
Alright, so I just finished cutting the rim off.
You need to be extremely careful
because these edges are ridiculously sharp.
So I'm going to actually lightly pick this up underneath it.
And yes, I did cut this on the trash can without any clamps.
Now, the reason you don't want to clamp it down
is because you're going to have to move this thing constantly
and it's going to be kind of a waste of time
to have to re-clamp it down all the time.
All you have to do is really just hold it down.
It's not going to go flying or something.
Nothing crazy is going to happen.
It just will make your arm extremely tired
because this thing will be vibrating so much.
The next thing you're going to want to do
is take an 80 to 200 grit sandpaper,
or go through 80 to 200, and sand down these edges.
And if you have any weird divots,
like when you get kind of close to being done,
the rim is going to be vibrating so much
because it's like there's nothing left really holding it on
that when you hit the final cut,
you may have a little kind of spot like this
where it kind of got weird.
So just sand all that down
and then we will go to the horrible process
of removing the paint off this thing.
Now I know a lot of people have issues
stripping the paint from their shield.
I know it's like the worst part of this build.
And I usually use that citrus strip,
which is like a natural kind of based one.
Here, I'm going to use today
because I just have this in my garage
and I don't want it to go out and get anything right now.
This is Premium Stripper by Clean Strip.
I don't think it's the same brand as Citrus Strip.
So this works, I guess, takes 15 minutes.
So we're going to try and see
if this one does any better than the other one.
And the issue people kind of think that they can do
is you can spray it on
and leave it overnight or something.
Don't do that.
Wait the allotted time
because it'll actually dry.
So if you spray it on and leave it like two hours,
the stripper on top will actually dry
and cause it to reapply itself kind of.
So it'll look really ugly
and the paint's not coming off.
It'll just be the same as it was, just worse.
So wait the allotted time
and then try and wipe it off.
Do a little test as we go.
So let's try this stuff out.
Now I don't think it was supposed
to come out of the can like that,
like really slowly, but it kind of did.
So it is very cold out here.
It's like 40 degrees.
It's like the beginning of January.
And so I sprayed a generous amount
as much as I could get out of that can.
There's still a little bit more,
but I'm going to leave this for about half an hour
and then see if I can get any paint off there.
Sorry about the kind of weird camera angle.
I promised myself I'd try and film all of this,
but once again,
this is such a messy process of removing the paint
that I really just can't.
Do it on camera because it takes so long.
I've been working at this for 24 hours.
The front is mostly done,
but the back, as you can still see,
has quite a bit of work to do.
I literally have gone and bought
two different types of paint remover.
I got the normal one I used in the clip just below this.
And then I went out and bought an aircraft one.
It's right here.
It's called Aircraft Remover.
That was $14 or $16 or something.
It's in the automotive department.
It didn't work any better than the other paint stripper.
Really, this is the hardest part of the build,
but it's going to be worth it when the whole thing is done.
I'm going to try and get the rest of the paint
off this goddamn thing,
and then we can get to the painting process.
The next thing we're going to do,
since most of the paint is removed from the front,
is we're actually going to add that spun effect.
Now you can see I did a lot of it already
just to see if I could find a better way of doing it,
but there is really one method of doing it.
I'm using that cardboard.
I got another piece of cardboard cut out.
This one's completely ruined
because I've been using it so much.
You're going to need a tack
with kind of a big end right there
as I drop it on the floor.
You're going to need something like that
so that it doesn't keep going through the cardboard
because my nail kept flying through the cardboard earlier
and I found that this works better.
You're going to stick it through your cardboard.
I'm using 100 grit.
It's this flexible sandpaper stuff.
It looks like really weird tape,
but it's sandpaper.
I guess it's new.
You're going to stick your tack through it for now.
You're going to have to move it down as you go.
You're going to stick the tack inside the hole,
and then you're just going to apply pressure
and begin to spin it.
As you do this,
you're obviously creating micro abrasions on the surface,
creating a spun texture,
like this shield was actually spun on a lathe,
kind of like how they do it in the movie.
It's like aluminum spun,
or if you've ever used the aluminum blanks,
which I'm used to using.
You're going to want to do that
for the inside and the outside.
As you kind of get lower,
you're going to take your tape off,
or your sandpaper,
and you're going to move it down.
At this point in the tutorial,
I kind of got tired of just talking over everything,
so I decided to use voiceovers for the rest.
Here's the engraved star.
Now, this is a little bit complicated to talk about,
but basically you need a Dremel,
and I have a really cheap off-brand Dremel here.
You want an engraving bit.
Here is the star template.
I have a link in the description below
because the website did change.
What you're going to do is practice on an aluminum sheet
or any type of metal first.
You just want to go slow
and try and get any of the details
and basically the main star shape out.
Now, I say just practice
because this is one of my first practice attempts,
and it's really, really bad.
You can use a ruler or a straight edge
to try and get it,
and if that's too much for you,
you can just cut out an aluminum star
like the other videos,
but I thought I wanted to be different
and try something new.
After that, you want to measure out
how far your star goes down in your radius.
Mine was about 9 inches or 9 centimeters.
Then, using the same idea we did earlier,
you're going to want to make the circle with your compass,
and then using some thin detail tape,
you're going to want to tape that out
and make sure the edges are super crisp
so you don't have to push down all of the tape there.
Then, you're going to want to,
if you did an engraved star,
mark off the star.
If you did an aluminum star,
you also want to mark that down
because you have to glue it on later
and all of those details in my other video.
I basically taped it off,
the rest of the shield with some paper towels.
Wipe down any of the areas you're going to be painting
as you want to get rid of any fingerprints
because it will show
because we're going to be using the Dupli-Color Metal Cast
and it is an anodized finish,
so you will see underneath the paint.
That's why you want to have that cool engraved texture
with the spun effect
because it's going to look underneath the paint.
Do some really, really light coats.
This should be how light your first coat looks.
I actually messed up quite a bit in this video
and I will show up all the mess ups and what I did wrong.
This is how light your layer should look.
Here, I start to go a little bit too thick.
Actually, this part's fine,
but eventually I will start layering it up
like as you can see in the right now,
it's a little too thick.
You want to build up super slight layers with this stuff
because if you do too much,
it will create issues later on like I'll talk about.
As you can see here, that's far too dark.
You can actually almost barely see the underside.
When I'm removing the tape here,
what actually ends up happening is
it was so thick that it actually pulled over on top of the tape
and ripped off some sections.
You really can't see it
because the camera fixed it for some reason in this video,
but on the top, a huge section of paint was ripped off
of the circle and I'm pointing it out right there.
It is minor, but it bothered me enough
that I know I'd have to fix it.
I put some acetone on a rag and wiped that right off.
Since this isn't any extreme paint,
you don't need any crazy paint remover.
This was the second attempt.
As you can see, it's a lot less blue
and you can see the detailing underneath.
That's how it should look.
It is a little rough and bumpy,
which did for some reason cause some issues later on.
Here, I'm measuring off the other two lines
that are going to be necessary to make the two red lines.
What I did was basically measure off
what I had left of the star
and divided that by three.
Using my compass again, I created those two lines.
Just like with the blue, I used the detail tape
and went all the way around the shield.
Then I'm using the red metal cast paint.
Make sure you really do have everything taped down.
I did have some areas that weren't taped down all the way.
Once again, do extremely light layers of paint on the sled,
making sure you're going in sweeping motions.
Make sure you move around the entire sled.
You don't want to try and hit areas
like I kind of am doing here from a wrong angle
or else it will kind of build up a little bit too much.
So this is what it should look like
after about two or three layers.
As you can see, it's a pretty rich color
and that anodized look really shows
the texture we did beneath it.
Here's me removing the tape.
There are a few little issue areas
that I removed with some acetone.
Now, using some soapy water and about an 800 grit sandpaper,
you're going to want to wet sand your entire shield
just to get the paint all kind of down to the same level
and get rid of any small errors
that you may have had in your paint
from painting it in the original first place.
And then using a clean towel,
you're going to want to wipe off the entire shield.
Now, if you do have some areas
where the paint didn't match up with your tape or whatever,
you can use a red and blue Sharpie
and it works wonders at filling in some messed up paint areas
like you can barely even tell that was originally there.
Then using a paper towel one more time,
you're going to want to clean off the entire shield
to make sure you have no more fingerprints.
You want to get rid of any type of residue
or small things you may have on the paint.
Here, we're using the best clear coat I've ever used.
It's the Spray Max in Clear Glamour.
It's a 2K, so you really want to be in a ventilated area
because this can actually kill you.
I just read about this after doing it.
Basically, on top of the lid, there's a little red cap
and it will put in the bottom and press down really hard
and that will actually activate it.
And you will have to shake up the paint
for a long period of time
until you get a super mixed solution in your can.
And then you want to spray it kind of back and forth motions.
The nozzle on this can is incredible.
It has a huge kind of spray to it.
And as you can see, it already, like the first coat,
makes your shield extremely, extremely glossy
and it really brings back any of that color
from wet sanding that we removed.
And like I said, go kind of try and get the angles
you need to paint that over.
So this is after two layers
and as you can see, it's extremely glossy.
You can even see the reflection of me with the camera.
Something that ended up happening with the weird rough blueness
is that the paint kind of separated in spots
and it bothered me enough that I redid the entire thing.
So here's the shield after I redid everything.
I used two coats of clear on that
and this is after 48 hours of drying.
As you can see, it's extremely, extremely glossy.
For the straps, I'm using these anchor points
that you can get at any hardware store
of basically stainless steel and kind of just regular.
This is the regular.
Put it on the back of your shield
and try and figure out kind of the placement
of where you're gonna need your hands to hold the straps.
And then using some JB quick weld,
mix some of that up and you can put your anchor pieces down
and the quick weld only takes about an hour,
an hour and a half to completely set up.
That's why I use it.
And then you can put some belts in there
and then your shield is pretty much done.
I hope you guys enjoyed that tutorial.
I know I had a lot of fun building it.
It took a lot longer than I originally anticipated
mainly because getting the paint off this thing
was literal hell.
That is the one downside to this whole project
and the $30 kind of shield,
but you can get what you get
and we can't throw a fit
because this is such a cheap project
and it's incredible for cosplay.
As you can see, it fits the costume really, really well.
I have no straps on this right now.
It's kind of just the bare degrin
because I don't have any belts on me,
but I mean, it works.
So yeah, I hope you guys enjoyed this video.
I'm going to have a whole rundown of the costume soon
when it's done.
I don't like these shoulder things right now,
so it kind of looks wrinkled.
I am wearing a muscle suit, by the way,
if you're wondering why I look 10 times,
I guess, bigger than I normally am.
I'm kind of like small but fat.
Like, you know Peter Parker
in the new Spider-Man movie,
but like the old one?
Like, that's a pretty similar body type.
So yeah, guys, please subscribe
and I hope you enjoyed this video
and I hope you guys have a fantastic rest of your day.
