Chemical recycling: the end of plastic waste? | Rethink Sustainability

Protecting The Environment
106 followers
AI Generated·May contain errors
The world is choking on plastic waste. Less than 9% of it is recycled. I'm on
the trail of an emerging industry which promises to change all that. Starting in
Merseyside, a key UK chemical hub and home to a pioneering plastic recycling
business. Hi Alex, good to meet you Toby. Used tyres are a big part of the plastic
waste problem. Typically 24% plastic, around half a billion are dumped every
year. Like most plastics, the polymers in tyre rubber come from crude oil. It takes
30 litres of it to make just one standard car tyre. When you think about
tyres, you tend to think about rubber, you don't think of the oil that's
contained within them. Wouldn't it be amazing if we could reverse manufacture
them back into crude and then use that crude to manufacture new plastics. That
reverse manufacture is chemical recycling, separating complex waste like
old tyres back into original components that can be reused to make new products
over and over again. A so-called circular economy. The first step is mechanical,
shredding, separating and pulverising. Once the metal and textiles are stripped
away, the tyre shreds are broken down and sorted into exact uniform sized pieces.
Right now we really want to learn how to control that reaction to produce
valuable products out of the other end. That other end is the all-important
chemical reactor. It's just been delivered from Europe and I'm here to
help unveil it. The next big step from small-scale experiments to commercial
processing. Once connected, this machine will break down tyre rubber by heating
it in the absence of oxygen. A thermochemical process called pyrolysis.
It increases the temperature up to 400 degrees and the rubber starts turning
into oil. At that point you get separation between the oil, the gas and
the solid. Pyrolysis isn't new but by fine-tuning the process, Big Atom
believes it can make commercially viable products from the oil and carbon powder
extracted from old tyres. Half of the components in here can be used to make a
biofuel. The other half of components in here can be used to make new synthetic
rubber or plastics. This goes straight back into the tyre manufacturer. Gas is
also produced which can be fed back to the generators powering the reactor.
Right now most of this rubber is sold for reuse in applications like road or
place surfacing but the company aims to be chemically recycling it on a
commercially viable scale by 2022 and it's not alone. A few hours drive away
another operator is preparing to launch an intriguing alternative. I'm now 200
kilometres south in Swindon at a recycling centre because this is
precisely where another company wants to put mobile plants to process the plastic
that we currently throw away.
Now 10 years into research and development, recycling technologies is
targeting complex, often contaminated food packaging that can't be recycled
mechanically. It's films and it's crisp packets and it's just all of the
type of plastics which normally people don't do anything with other than
landfilling them or burning them. We have to really stop doing this. We can't keep
putting carbon into the atmosphere by burning materials. All plastic, even the
waste plastic that we normally think is waste plastic, it's actually a very
valuable material. I'm led through a pyrolytic process similar to that used
in other experimental plants which promises to extract that value from
plastic rubbish. It's heated and turned into gas. Cooling down in stages the gas
separates into the ingredients the plastic was made from. Perhaps we could
take a look at what comes out the other end. Up to 80% of the waste fed into the
plant is recovered, converted and ready to be used to make new products. So this
will become food grade plastic. This could become crisp packets or yoghurt
pots or whatever again. It's a clever process but it begs the question
shouldn't we all just stop using so much plastic? What's the alternative? If you
use glass it's going to be much higher carbon footprint. If you use metal it's
going to be a much higher carbon footprint. People don't even realise that
sometimes a paper bag can be two and a half times the carbon footprint of a
plastic bag. The system has its limitations. It isn't built to process
PET and other mechanically recyclable plastics and it can't handle the chlorine
in PVC's. But it can process 7,000 tonnes a year and is designed to be mass
produced in modular form. By making those Lego bricks if you like and then
clipping those things together you get yourself a plastic processing machine
very very easily. One commercial plant is in construction. The ambition is to
build 200 a year. Chemical recycling is gaining momentum and investors who see
profit in the circular processing of plastic waste.
