StrongPoint Robotic Depalletizer and Palletizer of RSC Cases
Feb 2, 2026 #industrial #technology
Comments are disabled for this video.
This palletizing system is designed to process pallets of unmarked frozen food boxes
from warehouse to customer. After the customer receives an order,
the unmarked palletized boxes enter the system and are depalletized onto a conveyor by a FANUC
M410IC315 robot. Once depalletized, a programmable bump turner is coordinated
with the HYTROL E24 zoned case conveyor. This introduces the case's narrow side,
leading to a downstream case labeler. It is here that the final end-user labels are
automatically placed onto the case. The labeled boxes travel to a repalletizing station,
where they are stacked onto an awaiting pallet, wrapped, and conveyed to the end of the system.
This system is set up to handle 20 to 40 pound RFC taped boxes.
Palletizing and depalletizing is handled by a FANUC M410IC315 robot with a custom end-of-arm
tooling setup. Multiple sensors in the end-of-arm tooling automatically detect and handle varying
case heights, different layer configurations, and partial layers. The end-of-arm tooling is
comprised of vacuum cup technology with compliance to handle uneven case height variations
and pick slip sheets from the pallet. This process was originally handled by four laborers who had
to perform in a frozen environment. Multiple injured back claims and lost time resulted
in difficulty maintaining enough labor to keep the system moving. With the automated system in place,
labor shortages are no longer a concern and productivity is steady at processing speeds
up to 15 cases per minute. The system also has the ability to change out pallet tapes,
as the end customer may at times require a different pallet than what was introduced to
the system. In order to handle this, two pallet magazines were integrated into the system
to both collect and dispense pallets.

