How to Draw a Landscape With Buildings, Trees, and Water, Belgium canal scene

Art painting
22 followers
10 Video Views·Feb 2, 2026
Hey buddy welcome back
I'm doing a quick demo for you And from
now on I'm going to do it
As you can see I'm getting
lines there at the moment
I'm going to work on the techniques again today
The paper I'm going to use
Your paper cartridge
The pencils I use
are actually quite important in reality
I'm using three
different HB pencils a
mechanical pencil and a twin-tipped pencil
I use that for a drawing board
ree 2B pencils
in reality
three 2B pencils
Several different paths leading to that place
pencil mechanical 4B
pencil 2H
pencil same
In truth I do
use many things
Pencil here
brush here
paint here
paint here flashing sharply
environmental concern
Paper scraps
cotton waste
offcuts from garments
fabric remnants
That’s enough
This will be used for
the current draw Alright
we're getting started with the truth
I've added a video to Patreon all of this photography
showcasing the various aspects
How did you make the wall how did you build the water feature how did you construct the stonework and so on
There will be a live video stream
on YouTube discussing the same topic
If you're excited to see my Patreon
a description of how I draw and learn some of the techniques I use
Come out there see for yourself
and hopefully see you there
Alright so we're clear then—we're starting
Alright alright so I'll start with the HB
pencil to develop the drawing of the part
Please make sure you're fully aware of the photograph I'm using
It's making progress of 3.25 inches ahead
The paper I'm working
on is the photograph the same notable photo
and otherwise making the photograph more lifelike
That's exactly how I'm feeling just the same way
It doesn't matter how you use the written form
Otherwise how far the various roads are from one another
as shown in the paper and the significant photographs
You will be able to make the drawing without any problems
In fact it's a good way to use the path of writing
Whether you choose to enlarge the photographs
or reduce them that's entirely up to you
Also I have a photo of the photographer
on my laptop starting with me too
We must keep moving forward and out of certain areas
So we can move forward and out beyond certain
areas allowing us to see what the photograph truly captures
It gives the substance to me more effectively
It really helps me a lot when I'm going through it
So it's a good thing to keep in mind
If you're working within photography
use the zoom on your laptop
If you're sure what the area choices are
It's just as good a time as any to make the leap
I'm just as many people who've given the other photograph
So many people have already posted another photo
What happened was A
moment of silence
Once I'd finished the
line drawing
I had a major disaster—something
I'd never encountered before truly
Hope this helps you out as well
and warns you not to do exactly what I'm about to do
So what happened was as soon as I'd finished the line drawing it was with a Ticonderoga pencil
by the way I should mention that was part of the issue—right after I'
d finished the line drawing it was time to start removing some of the
Grid lines
Usually I can't remember what I've done in the past I don't think I've ever used the
eraser on the Ticonderoga to erase them out I think I've always used the Koh-I-Noor eraser
or a Staedtler eraser or something similar but this time I used the pink eraser
Rub the eraser end of the Ticonderoga pencil to remove the grid lines in the sky area
So it's all nice and clean ready to apply some graphite powder
Now everything's going smoothly it's all coming along nicely the lines are coming off
clean and neat and there are no pink marks left from the eraser or anything like that
So you know at this point I had no idea about
anything —everything was going perfectly no problem at all
I'll sweep away the eraser crumbs—they still look nice and clean—and then I'll
scrape some HP graphite powder onto a scrap piece of paper loading up the kitchen
A sheet of paper coated with graphite powder ready to soar into the sky—this is where the fun begins
You'll see in just a moment
Okay so I'm starting to rub the graphite powder over—I'm not sure if you can see it
Either way there's a slight glare from the lamp over there but where
the grid lines were erased there are now really dark thick lines
What's happened I think is that the eraser has left some kind of residue on the paper
e graphite powder clings to it simply sticking and accumulating in that spot and
o matter how hard I tried to blend it out it just wouldn't fade and I knew tha
Even if I erased it with the kneaded eraser it probably still wouldn’t look great
So at this point I figured I'd just have to start over
I'm going to give the Staedtler eraser a try see if I can rub everything out and hopefully
at might eliminate whatever residue the Ticonderoga pencil left behind
So I'm giving it another try right now and there we go—no marks
Fortunately the trusty Staedtler Mars plastic eraser came to the rescue
Yeah if those lines hadn’t been drawn that would’ve been it—end of the sketch
So now I'm using a 2H pencil to begin adding a few darker tones especially in the
sky area focusing on the upper part of the sky to enhance that section slightly
A touch darker just with light pressure using
small circular oval motions with the pencil to achieve a smooth even layer of graphite
I'll also mention the Ticonderoga pencil—I've never had any issues with the eraser before
It's a perfectly ordinary pencil for me when I'm sketching and I always use the pink eraser
o erase you know any mistakes or anything like that and then I can draw over
the top with graphite—it just seems to be an issue with the graphite powder
and the eraser on the Ticonderoga so I think you'll be fine using the Ticonderoga
just for erasing general lines and then as long as you're going over them with a graphite
pencil rather than the powder I don't think you'll run into any issues but you certainly will
Keep that in mind next time you use one especially if you're using graphite powder with it
Just going back to the drawing now I just used a kneadable eraser to gently lift out a few light marks
ose puffy cloud-like shapes then softly blended them in with the Q-tip
and now the infamous Ticonderoga pencil again I'm surprised I didn't snap it in half and toss it aside
the bin actually but I managed to keep my cool So I'm using it again I'm giving it a second chance
second chance I'm using it again over there just to shade in the chimneys and now working on the
rooftops I'm roughly sketching the outlines of the tiles first mapping out their shapes I'm
lightly shading over with a blend of the 4H and 2H pencils There is actually a
real-time video on my Patreon page showing how to actually draw roof tiles and shade them
in—available if you're interested Right now I'm just using a small blending stump to blend
em just a bit I don't want them too detailed dark or high contrast
A little off to the side fading into the distance they're not truly part of the main focal point
ere But I did go a bit darker there as you can see just where that area is
like tiny specks of soot and similar details on the chimneys just to add a touch of realism
Character The same process applies to these roofs too But I simply added
a bit more texture and detail here obviously because they're positioned further forward in the frame
Still using the 2H pencil just to add a touch of tone and texture
Now I'm working on the windows shading them in deeply with the 2B pencil
Once again there's another video on Patreon showing how to achieve these details and capture the fine intricacies
Well I'm using a Tombow eraser to gently remove some of the 2B pencil marks to help suggest the shape
ose leaded windows with that kind of lattice pattern you know the one I'm not entirely sure what they're called exactly
you know with these kinds of leaded glass windows and then I'm going in with the 2B pencil
working between the lines I've just erased just to add some shape and deepen the darkness
a bit And I lightly shade over it with an HB pencil tone everything down
a little lower now Moving on to the stonework I'm just roughly outlining the stones
with graphite applied using the tip of a blending stump giving them a soft diffused appearance
And I literally work over the entire surface of that building there
until it's completely filled in with tiny stone fragments all from the blender
And once again there's another video on Patreon that goes into greater detail on how to do the stonework
After blending it thoroughly I go in and use pencils to deepen some of the areas
That's a 2H pencil for darkening some of the individual bricks and
stones and the eraser too to add small highlights here and there
Now for the ivy growing on that wall I'll use a 2H pencil again making small
circular motions just to block in that area I'll switch to an HB pencil next
and begin gradually adding a bit more detail infusing a touch more texture and tone
A few light touches with the eraser then it's back to the 2B pencil
To capture some of the richer darker tones add a touch of form and contrast
Alright so for the walls on the front of these buildings there's a mix
of pencils used here—I roughly sketched in the boards using either an HB or
a 2B pencil then shaded them somewhat individually with an HB pencil then used a 2B pencil to ge
using the 2B pencil for the window frames then shading in the darker areas
darker at the top fading to lighter at the bottom using an HB pencil and I also
added a subtle window-like effect there then lightly shaded over everything once more
HB pencil You can see now I'm carefully sketching the individual lines on the boards over there
on the front of that building and I shade it with an HB pencil then use a 2B pencil for the darker areas
areas Perhaps a few small spots here and there using the kneaded eraser as well just to ge
small highlights on certain boards then just blended them slightly
This was probably the longest part of the drawing actually this section right here
You know the front of these buildings—I used a set square quite
a bit to keep the windows straight and yeah it took quite a while
Some of the perspective lines here are quite tricky instead of
using the grid lines you can apply the one-point perspective method
establishing a horizon line and placing your vanishing point at eye level then drawing
those horizontal lines down toward it and striving to maintain consistent roof lines
corresponding with that But quite honestly I find the grid method just seems to work for
everything and it does appear to help me improve my freehand drawing too Whereas when you're
getting dependent on those perspective lines sometimes you can literally just rely
on them but as I mentioned with the grid method you have to work them out yourself
but since the grid lines are present creating perfect right angles and crisp vertical
and horizontal lines you can see the angles seemingly colliding with those lines
and work them out fairly easily But you know it's each to their own—some prefer to work to
e one-point or two-point perspective method whichever you prefer
You've probably noticed in the last few videos that I've just been really diving into the grid method
at the moment so while I'm in the groove I'll keep going with that So I'm just using the kneadable eraser
You can see I've pinched it to a sharp fine tip so I can create
softer highlights on those distant bushes that are just sticking out
So now it's time for the background buildings The roofs were done using a combination of the 2H
and the 4H pencil I'm using the 4H pencil right now to lay down the first layer
a bit of a hit-or-miss kind of pencil stroke so I'm leaving small gaps of white
showing through while maintaining the pencil strokes horizontal and I use a 2B pencil for the very
A dark line at the bottom there and now I'm using the HB pencil to add a few
darker midtones and picking out the occasional small brick here and there
Now the trees took quite a while—there's a real-time video of it I think it's over an hour long
and it's available on my Patreon I've discussed tree techniques before in other videos so I won'
don't dwell too much on it this time—I'm just outlining the branches for now When I actually
Put the graphite powder in the sky and I was blending it losing a lot of the line
drawing at the branches so I'm just re-establishing that now and starting to shade
I was torn between leaving the tree completely bare and adding some details with the HB pencil
I don't have any leaves on it at all but I kind of like the contrast and the shapes of the branches
but I did ultimately decide to add some greenery to it Now the roof on the
background there at the back of the tree once more it was done just like the others
a blend of the 2B and HB pencils sorry the 4H and 2H pencils with a touch more graphite
Pressure applied to the 2H pencil to capture some of the darker areas and add a touch
of character and interest to the roof A very similar technique was used for the stonework on this building
except actually adding more of them with the pencil rather than using the
blending stump The same process applied to the walls too that wall on the left side
with the archway on it I usually started by sketching the outline of the stones then
shaded each one individually before adding the darker tones for the moss growing on the
wall there Now I'm sketching in all the small clusters of leaves using a 2H pencil and for the
lighter areas on the tree trunks and branches—I'm using the Tombow eraser just to
erase small clusters of leaves and tiny leaf shapes as carefully as possible so they don't loo
oo harsh and they blend well with the other two 2B pencil strokes I just added Just give them a
a light shade tone them down just a bit I blocked in the tree trunk with
a 2H pencil and then used an HB pencil to begin the detailing process
and begin adding texture to the bark keeping it darker on the right side as well
and use the 2B pencil to achieve the deeper tones
And then to bring everything together lightly shade over with the HB pencil followed
by the 4B pencil just on the right-hand side of the tree trunk there—just right
You can also achieve those nice dark areas around and at the base of the trunk
So I'm beginning to shade in the water to capture some of the reflections using the HB pencil
just sketching the outlines of where the window shapes will appear in the
water the darker patches beneath the trees then I quickly switch to a 2B pencil
I actually switched this 2B pencil on the spot not that there was anything wrong with it
e Staedtler Noris 2B it's just that I already have a Derwent sketching pencil in 2B and it's got a
Thicker core—this is it now it's got a thicker core inside and it'
s just much faster to actually shade in some of these darker areas
And I'm using the kneadable eraser to lift out some highlights and reflections
They're arranged somewhat vertically kept nice and upright giving the water a sense of depth
Try not to overdo it—once it starts looking good it can easily get out of hand
you want to do more but you might end up overdoing it so keep it fairly subtle
and then blend them in very softly smoothing the transitions between the lights
The central region with the darker patches along the sides
And now I'm using the pencil eraser to remove some of the shapes in the water
Once again I don't want to keep repeating myself but there's another video
showing you how to do this in greater detail and more depth over on my Patreon—it sounds like
I've been mentioning Patreon throughout this video but I just want to let you know there
are more in-depth videos available on some of these techniques if you're interested
So a mix of using the eraser blending and alternating in and out with the 2H pencil
Just to re-establish some of the shapes took care of the water and there's the finished drawing
So I hope you like that thank you very much for watching
Take care everyone and I'll see you next time—bye for now
