Maiden Flight of the Freewing Twin 64mm F-14 Tomcat

Flap Fliers
1 follower
1 Video View·Feb 1, 2026
Sweep the wings
What's going on guys we are back with another maiden and look what we got here the brand new release for motion RC
The free wing at 14 Tomcat. I am so geeked out over this thing
It's just so on a on a cool cool scale from 1 to 10. I would say it's probably like a 10,000
I mean this thing is just absolutely nuts
There's all the scale details on it. The gear are actually pretty awesome. They swivel closed
the engineering that went behind
Doing this swinging mechanism under here is just truly a work of art and in there
I'm dropping a shot of the inside there as I talk here. Um, one thing I will meant putting it together is actually pretty easy
It looks almost overwhelming when you first look and get the plane and see all the wiring everything inside there
But it's actually pretty easy. One thing I will say
There's connecting rods that go to the servos there that drive the arms or the wings
one one kind of
tip that I would give you is when because the the plane is programmed for if the wings are
Out like this and you have the flaps down. It will not let you close the wings
And it's a it's programmed that way from factory
So
when you're
Building the plane and putting the wings on
What I did was I I mean I set up my flap system first
Before I put the connecting rods on because I didn't know if I had it backwards
I don't want I didn't want the wings to close while my flaps were down and crunch them. So that's my advice is
Set up your flap system first
Make sure everything's working properly
Watch the servos open and close for the wings without the connecting rods on to make sure that the system is working as intended
Before you go ahead and hook up those rods
So that way you prevent any kind of damage to the flaps or anything like that
But uh, but yeah, man, I'm super excited to get this thing up in the air
And nervous as well
The plane is absolutely cool. And uh, so let's get this thing set up on on the runway and get it ready for her maiden flight
All right, we got to set out on the runway getting ready for the maiden flight here the control surfaces have been checked
I have a notch of flaps in
I'm flying on a 4,000
and
I have a channel receiver in
No 9 channel receiver you need 9 channels to get this plane fully
Operable with the thrust reverse but me flying off a grass. I don't really need thrust reverse
so I opted just to get a channel receiver and
We are going on
My mid rates that I have here and those mid rates are basically that the the rates that Wesley from ocean RC called out on
His video that he likes. So that's what I chose to go with and that's what we're gonna attempt to fly with here today
And see how we like that
So without further ado, let's get ready for with the maiden flight of the brand new free wing twin 64 millimeter at 14 Tomcat
She is up get the gear up get those flaps up
We need some up elevator
So I can find my great switch
Winds picking up here. I'm way up there. This is a maiden
Try to find my great switch really
Way out there
I'm still trying to fumble it fumbling around for my rate switch
For my trim switch I should say
And it's flying really smooth. I'm just trying to get it trimmed out here. I know I'm way out there
But this is a maiden like I said
And I'm about a 50% throttle here
Just cruising around
Still trying to trim my head, which is not good
We're gonna try to reverse this pattern. I mean, it's flying really smooth
Need to try to get it trimmed out
We're gonna come back around this way. I
Can I'm gonna try to sweep the wings on this path here?
around
Full wind sweep there
Holy hell
Holy hell she scoots. That's the first time I gave her full throttle like that
We're still in full wind sweep here. Oh
My god, what an absolute beauty
Try to get the wings back out
Didn't mean to do that. All right, we had to work on getting her landed here. So
The gear out here
See the gear
All right
I'm just jittery. Really? I had a nice approach. I just literally just messed that all up
Take this
Nice and hot. Oh
Lee man, my hands are
Maybe get her turned around here. Try to get her brought back down here
literally, it was more jitters than anything with the landing because it
It came in for the landing with like with just ease like it was literally effortless
Her just relaxing into a nice little attitude
but my hands are just so shaking so much that I
Made it way that made that way harder than it needs to be. So let's pop the hatch that show you inside
let's get a battery port here and
And yeah part and there you have it guys that's the maiden flight of the brand new free wing twin 64 millimeter f-14 Tomcat
It actually flew awesome. It was me. It was me being more shaky than anything else
I was I just lifted. I don't want to damage this absolute
Beauty work of art that I got here. So
Got a little bit shaky here that the hands were the hands were shaking a lot on that one
And I actually got more nervous than I normally do for whatever reason but but now man
She flew awesome of the landing was almost Jesus Christ. Like I made that way harder than it needed to be really
But like I said
Awesome. Awesome plane. Let's uh, pop the hatch here and check out the battery. See what we're working with here
All right, we're in the battery bay here the Tomcat and man, we're at 12%
It was definitely time to come down
I did one more go-around that I shouldn't have done but I was a complete nervous wreck there for whatever reason and
Completely messed up that landing. The plane was actually coming in really nice. But um, yeah, this is on a 4,000
80 C is the cokin pack and that's where I have my CG at and it levels literally perfect right there with a 4,000
And I'm flying on a spectrum a channel. I think this is an AR 80 20 telemetry receiver
The plane already has its own onboard gyro on board so
No need for a safe receiver. So this is just telemetry receiver. Like I said a channels
you need nine channels really to
To get everything including the thrust reverse me flying on grass. I didn't need thrust reverse
So I decided to go with just the a channel there
So, um, cool man, awesome plane. All right, we got the f-14 out on the runway over there getting ready for our second flight
The wind has picked up a little bit and the clouds have dissipated a little bit so hopefully
It won't blur out too much. But uh, we got to get this flight in
So let's get ready with flight number two of the twin 64 millimeter free wing f-14 Tomcat for motion RC
All right, guys, this second fight actually didn't go so well not in terms of the flight more so in terms of the video
It was a windy day and the wind started picking them dramatically and also the clouds kind of went away and the camera started blurring
So I figured I'd jump in here and voice over this flight and go over a couple of things
I feel like I may have forgotten to mention
So going back to when I spoke about the flap system
Make sure that in your flap system you start with a value of negative 100 with your flaps set to the flaps up position
Wesley for motion RC kind of mentioned this in his video
I guess I'm assuming this is a way that the system picks up on that
The flaps are in the up position so as to not let the wings sweep with the flaps down
This is the way I set up my my model
According to the way he said so and and everything worked out just as intended
Also, the book calls out for a flap to elevator mix with the values being one millimeter down elevator in your half lap and two
Millimeter down elevator and your flaps full. I'll drop in a shot of my flap system what it looks like
I have dialed in on my position 1 negative 50% to 3% down elevator
And for my position 2 at 15% to 5% down elevator moving on to the wingsweep system
Regardless of whether you have your wingsweep set to a two position switch or a three position switch
Just make sure that in the wingswept position that you bump up that that value to a hundred and fifty percent
It actually even mentions this in the manual
I think they say a hundred and forty percent, but just bump it up to a hundred fifty percent
This way you get the full wings tuck look if you leave it a default the wings are still gonna sweep
You're just not gonna get the full effect moving on to the gyro now
Here's where I really need to get serious and really try to hammer this point home check
Double-check and triple-check that your control surfaces are all correcting in the right direction
Also, make sure that when you're plugging in your servo pins into the control board that you're putting them in the right location
Not doing so is gonna cause your gyro to correct it in an opposite direction
As I found out when I had my ailerons backwards my elevators were actually traveling different directions one was going up
While the other one was going down
So then I had to go back in flip-flop my aileron and then everything started working properly
Also, there's gonna be an app available that you're going to be able to hook up your phone to the model and adjust the gyro gains
If needed but at the time of recording this video is currently not available
But should be in the near future
Did made in this on a windy day and I included gyro kept it nice and locked in all in all is fantastic flying model
I will say though
However, this plane is prone to dropping a wing if you get it too slow
So this is definitely not your first EDF jet and probably not your second not that it's an overly difficult plane to fly
I just feel you need a little bit of experience to know how not to get yourself into trouble and know what to do
If you do find yourself in trouble
I just don't want this plane to get a bad rap because it is an awesome plane
But I feel like mistakes are gonna happen
Also the build quality check out how this baby eats is absolutely horrible landing done by me there
You do have to land this plane under power and I was a little bit late on the throttle there
Which resulted in the plane kind of dropping off from under me and causing that hard landing
Man that gear is uh, that gears pretty good because that that took a pretty hard landing there
but that's why I wanted to land it early because this wind is just
This wind is just not fun
And I didn't want to risk
Further injury to the plane. All right, there you have it
That's gonna be flight number two with the twin 64 millimeter free wing at 14 Tomcat
What a beautiful plane and this thing is just awesome and it literally just ain't that that hard landing that I just did
That I did there. I was terrible. No, I was just fighting the wind the entire way
all right, it's a blowing even right now as we speak and just to
Be sure to put the gear up so you guys can see
Back out and that door there it takes forever to come out. We gotta wait for that
There you have it man gear in perfect shape man, it absolutely ate that man
That was terrible. All right guys, that's gonna be it for the free wing twin 64 millimeter at 14 Tomcat from motion RC
Awesome plane just absolutely awesome. I'm super geeked out about it. This plane is
It is awesome. It is absolutely awesome
What I will say it you need at least an a channel receiver, which means you're gonna at least need a an a channel transmitter
I'm using the annex 10
But you're gonna at least need a an a channel transmitter and a receiver
To get this plane fully bounded up with the wing sweep and the gyro and the flaps and retracts
But but yeah, man, awesome. Awesome plane. Can't wait to get it back in the air
I'll definitely have this on the channel again on a better much calmer day
We can actually we can fly it the way it's meant to be flown and not just baby it around
But uh, but yeah, man, that's gonna be it for me and I'll catch you guys in the next one
