Jan 30, 2026
Desde el Embarcadero del Centro de Turísmo Rural «Carrecalzada» recorreremos el cauce del canal de Castilla en el San Carlos de Abánades, una embarcación eléctrica dedicada a esta actividad turística y acorde con la naturaleza, perfectamente acondicionada para el verano y el invierno. Jesús Santamaría es el patrón del barco y su hijo Jorge el marinero.
En los siglos XVIII y XIX, el Canal de Castilla fue una gran construcción de ingeniería con una red de canales que unían desde Alar del Rey, en Palencia, hasta Medina de Rioseco y Valladolid, para transportar el excedente de grano. Comenzó a construirse en 1753, concluyéndose en 1849. Pero quince años más tarde ya existía la línea férrea Santander - meseta, decayendo el negocio del arrastre de barcazas, hasta la prohibición del tráfico en 1959. Ahora su función principal es el regadío, además de una de las rutas de mayor atractivo turístico de Castilla y León, por el paisaje natural y su valor histórico artístico, siendo declarado Bien de Interés Cultural en 1991.
El canal transcurre por 205 kilómetros de las provincias de Palencia, Burgos y Valladolid, con tres ramales: Norte, Sur y Campos. Para salvar los desniveles del terreno se construyeron 49 esclusas, que en ocasiones salvan un desnivel de 87 metros, con varias esclusas unidas. El desnivel total de todo el recorrido es de 150 metros.
A lo largo de 10 kilómetros, el tramo del Ramal Norte atraviesa la Provincia de Burgos, cerca de Melgar de Fernamental, con esclusas, presas, acequias, fábricas, mojones, dársenas, edificaciones, puentes y acueductos como el de Abánades, una espectacular construcción de cinco arcadas, en el tramo entre Herrera de Pisuerga y Osorno que permite al canal salvar las aguas del rio Valdavia. Su construcción duró cinco años, de 1775 a 1780. Los sillares de piedra, labrados a mano, se colocaron con poleas de madera según proyecto de Fernando de Ulloa.
En los museos del recorrido del Canal, se muestra el trasiego de embarcaciones de las harineras y el transito por los caminos de sirga, de personas y animales de tiro de aquellos tiempos.
Los caminos de sirga, hoy son usados por ciclistas y senderistas, y el canal lo surcan barcas turísticas, en algunos tramos, practicándose también piragüismo. Además se alquilan hidropedales y embarcaciones a remos de cuatro pasajeros.
Las tierras de labranza cambian de color con cada estación y existe una variada fauna en la zona.
La esclusa número 14, en San Llorente de la Vega, construida hacia 1770 es una de las mejor conservadas, aunque ahora permanece cerrada para alimentar el canal de riego aledaño. Un bonito puente de sillería acompaña a la esclusa.
Al lado de la casa del esclusero hay un edificio que funcionó como molino maquilero y más tarde como pequeña central hidroeléctrica.
Esta fue la historia del sueño de unos locos pensadores ilustrados para sacar a Castilla de su aislamiento, abriendo una brecha en la tierra y desviando el agua de los ríos para crear un canal navegable que llegara al mar. La pronta aparición del ferrocarril, un medio de transporte más rápido y económico, trunco esta impresionante obra de ingeniería hidráulica.
Desde su cierre la Confederación Hidrográfica del Duero lo transformó, quitando las compuertas de las esclusas para convertirlo en un canal de regadío, que además sigue abasteciendo agua a casi 400.000 habitantes de Palencia, Valladolid o Medina de Rioseco, siendo el único canal navegable de toda España.
From the dock at the Carrecalzada Rural Tourism Center we will follow the riverbed
of the Canal de Castilla in San Carlos de Hábanas an electric boat dedicated
s tourism activity is perfectly suited to the natural
surroundings and ideal for both summer and winter
Jesús Santa María is the ship's patron and his son Jorge is the sailor
In the 18th and 19th centuries the Canal de Castilla was a major engineering feat
with a network of channels connecting from Alar de Rey in Palencia to Medina de Río
Seco and Valladolid to transport the surplus grain
Construction began in 1753 and was completed in 1849 but just fifteen years later it already existed
e Santander-Meseta railway line with the barge-
towing business declining until its closure in 1959
Its primary function today is irrigation in addition to being one of the most attractive routes
a tourist destination in Castilla y León renowned for its natural scenery and
historical-artistic significance designated a Cultural Interest Asset in 1991
The canal runs for 205 kilometers through the provinces of Palencia
Burgos and Valladolid with three branches: northern southern and fields
To address the terrain's elevation changes 49 locks were built which at times
It跨越 a 87-meter elevation change through several connected locks
The total elevation change over the entire route is 150 meters
Over a distance of 10 kilometers the northern spur section passes through the province of Burgos
ear Melgar de Fernamental with locks dams irrigation channels mills weirs and reservoirs
buildings fountains and aqueducts such as the one at Hábanades
A stunning five-arched structure along the stretch between Herrera de Pisuerga
and Osorno which enables the canal to cross the waters of the Valdavia River
Its construction took five years from 1775 to 1780
The hand-carved stone blocks were positioned using wooden
pulleys according to the design by Fernando de Ulloa
It is the largest aqueduct along the 207 kilometers of the canal
It has five eyes lateral fins extending from all four corners and the dimensions
Twelve meters tall twelve meters wide and fifty-one meters long
Yes although they appear to be roughly regular limestone blocks in reality
ey are not because these stones are jointed internally in a mortise-and-tenon fashion meaning tha
Each stone fits perfectly into the next like pieces of a puzzle
That is this ashlar for example which here appears to end completely straight
on the inner side it would have a piece that fits inside this other stone block and this
Anything else that comes in here same with the top and bottom parts
Yes on the inside these pieces would have a
curvature of approximately five centimeters
By the time it meets the inner sill piece which has an identical curvature
a tube is formed a hollow cylinder running from top to bottom through it and through that
That's where the mortar would be applied
since in addition to securing the masonry it also contains mortar
That mortar was made from sand and lime including hydraulic lime
It's a highly porous stone meaning it's well-suited for this type of hydraulic construction
Very good because it absorbs a lot of moisture just as it releases it as you can see here
When it absorbs moisture that moisture causes the sand and lime to bind
together become compacted and form a glassy paste that is essentially the mortar
To prevent such issues egg white was added to bind
the sand and lime together
Because the egg white breaks down with moisture and as it breaks down it produces an enzyme
It's this that allows the stone to absorb the treatment making it waterproof
There are roughly around 30 aqueducts give or take
More than 120 000 eggs were used just for the construction of this aqueduct
These stones sticking out here if you look through the other eye you'll see identical stones
Well it's not that they're the same it's the exact same stone running straight through the entire pillar
And they would serve as the foundation from which the wooden scaffolding or formwork extended
When the mortar is applied it takes time to
cure depending on the weather but generally about one and a half to two months
During that time the formwork was left in place to provide
greater support and would rest directly on these stones here
The shot they used to have on the barges was animal shot shot of blood always from
on the starboard side and would extend to where the wall ends and the side begins that is
on this boat where the first window on the right would be
From there they would haul a rope about 40 meters
long and pull it in a single line one behind the other
Pulling with such a long rope always from one side throws your body off balance
due to the forces meaning the barge's test would open toward the center of the channel
And when the stern grounded it swung toward the shore causing the barge to nearly cross over
To prevent that they had a helmsman in the stern who controlled an oversized rudder
And then the barge would be properly aligned firmly against
the starboard bank thereby allowing the correct side of traffic
Along the canal route museums display the movement of grain boats
and the movement along the pack animal trails of that era carrying people and draft animals
Today the towpaths are used by cyclists and hikers and boats glide along the canal
scenic in certain sections also offering kayaking opportunities
Additionally hydrobikes and four-passenger rowboats are available for rent
The farmland shifts color
with each season and the area is home to a diverse array of wildlife
One of the oldest sluices in San Llorente de la Vega built around 1770 is Sluice Number 14
Best preserved though it now remains closed to feed the adjacent irrigation canal
A beautiful stone bridge accompanies the lock
The locks are numbered according to the branch then within the branch
The crews would begin again at either track one or two and the same would happen on the southern branch
The operation and use of the locks as shown here are designed to overcome that elevation difference
change in terrain so what they decide to do is this
oval lock system because it allows two vessels to pass
Thus the lock's passage is expedited but filling it takes slightly longer
because they have to accommodate more cubic meters of water
If we assume as we have just done that we're navigating upstream
a little before the lock they would already have released the towing ropes from the animals and the same
The barge still under its own momentum should already have passed through the bridge and entered
Once the barge is inside
the lock chamber the two lower gates are closed
Once the upper gates are closed two small auxiliary
gates below are the ones that gradually open
The water is rushing in strongly so the barge must be secured to the iron fittings
These are here to prevent it from shifting Once we've
filled the glass to the desired level for leveling those
The gates can now be opened They are mitre-
type gates not straight but slightly angled
Keep them fitting together
The closing mechanism is
simply the water pressure itself so those gates cannot be opened until we equalize
Now that both containers are at the correct level we just need to open the gate and proceed
Now the system uses hydraulic pistons which are controlled via the reservoirs
The oil is dispensed and controlled from the boat using a remote control
Next to the former owner's house is a building that once served
as a flour mill and later as a small hydroelectric power station
This was the story of the mad dream of enlightened thinkers striving to rescue Castile
from its isolation carving a gap in the land and diverting
river water to create a navigable channel leading to the sea
The rapid emergence of the railroad a faster and more economical mode
of transportation transformed this impressive hydraulic engineering feat
Since its closure the Duero Hydrographic Confederation transformed it by removing the gates
from the locks to transform it into an irrigation canal which continues to supply water as well
water supply to nearly 400 000 residents in Valencia Valladolid and Medina de Río Seco making it the
only navigable canal in all of Spain