What Happens If You Vacuum Your Car s Engine During an Oil Change

Autos hacks
81 followers
4 Video Views·Jan 30, 2026
Have you ever wanted to remove the oil drain bolt without having a single drop of oil on your hand
then taking your time adjusting the drain pan under and then let it flow? Is that even possible?
So theoretically if we attach a vacuum hose here and it will create a negative pressure
while we are opening the drain bolt it's not gonna let the oil to flow while the vacuum is on. So
first of all we're gonna design a 3d print attachment here so while we are opening this
we need something to screw it on so we can put the vacuum hose and doesn't have any leakage over
there. So this is the vacuum I will be using it's a 15 liter and it has a great suction. So for
typical oil change on 2017 Toyota Camry we need 0w20 fully synthetic engine oil, filter cartridge
which already comes with its o-ring, funnel, cleaner, 14 millimeter for the drain bolt,
64 to 65 filter socket, along with it we need a ratchet and extender and the last thing we need
oil pan. Since we are working with chemicals we will be using gloves. So I designed on SketchUp
and send it to the 3d printer and for printing you're gonna have to use a material that can handle
a heat just in case when the engine is warm and you are doing an oil change so it doesn't soften
up or break. Alright here is the 3d printed adapter with the same thread 37 millimeter
which compatible with Toyota Camry's engine oil cap thread so let's put it on. Next we're gonna
attach the vacuum hose on. So normally when we are doing oil change we take the dipstick out but
in this case we're not gonna take that because we don't want any leakage of the air with the engine
so we're gonna keep it in and not take the dipstick out. Alright now let's put the drain pan under the
car and open the drain bolt. Turn on the vacuum. So in this moment you can clearly hear that it's
suctioning air in the engine and not letting it drain. So now we're gonna turn off the vacuum
and it's gonna start to drain. I'm using this old vacuum and it works out so let me know if you are
using a smaller one. If you notice not only my hand is dry, bolt also dry as well. Next we can undo
this cap and the filter cartridge comes with this plastic to drain the filter housing so it doesn't
make a mess when you are removing the filter housing itself. Next we're gonna take the filter
cartridge out and we're gonna clean this and for that I will use a brake cleaner.
So after cleaning everything and changing my glove I like to bring it on my toolbox
and change the filter cartridge and also the o-rings as well. And don't forget to put some
oil on the o-ring so for the next time it will be opening easier. Alright the filter is done
let's put it on. We are done here. Let's put the drain plug back and tighten it down. Now we're
spray some brake cleaner and wipe everything off. Alright let's remove the cap and take the funnel.
Alright let's put the dipstick back so we can check the level and it's on the second dot which
is the correct level. So with this method you won't have a single drop of oil on your hand and
when you do that one time you will do it again because it was very clean and so satisfying to
watch. And here are all the products and the tools I used in this video and I will make sure to put
them in the video description box below including the file and also the 3d printed version for those
of you who don't have 3d printer. This adapter is 37 millimeter so if your car not compatible
with this one let me know in the comment section below and I will design for other cars as well.
Hope you guys found the video useful and learned something new. If it was like and
subscribe if you haven't already and I will see you in the next one. Bye for now.
