Why Wide Shallow Bowls are so Satisfying – 5 Tips to make one without Slumping

Ceramic Art Studio
35 followers
4 Video Views·Jan 30, 2026
00:00 Intro
00:19 Let's get started
01:00 Flattening out
02:14 Forming walls
03:29 Create volume & shape
04:59 Smoothing the rim
05:11 Trimming
06:48 Smooth and finish
07:09 Decorate & glaze
08:41 After firing
08:54 Tips listed
09:28 Hope you enjoyed it
Creating the perfect wide rounded bowl is so satisfying but bringing the clay out into that
generous curve can lead to slumping. In this video I share five tips to avoid slumping and reveal a
decorative twist you'll love. So let's dive in. I've prepared around two and a quarter kilos of clay
about five pounds. My clay is quite soft and this might seem counterintuitive but this is
quite a hefty chunk of clay and I want to be able to move it around easily. If I use harder clay
I'm going to be working against the clay from the start. I'm going to get tired and I'm going to
overwork the clay. So this is my first tip. Work with clay that's soft enough to be responsive to
you. I'm throwing on a bat and this is my second tip. So moving a wide shallow bowl made with
softish clay is difficult. If you don't have bat pins on your wheel you can fix a bat with a pad of
clay or a damp chamois. Now I push down into the clay and open out and I compress and smooth the
base with a sponge. As I open out I'm considering the inner shape of the bowl and now I'm pulling
the clay up to form the walls. And as I pull the clay upwards and outwards I'm leaving a little
extra clay in the wall at the base. And this is the next tip. Leave extra clay in the base.
The base of your pot must support the upper part of your pot. If this part of the pot is too thin
it won't be able to support the clay above and your pot will collapse. I can trim this clay away
later either as I'm cleaning up my pot or once it's leather hard and I trim. I'm squeezing gently
and my hands are moving very slowly. This is important. If I move upwards too quickly I'll
end up with a spiral and my walls will become uneven. Walls that are uneven in thickness are
more prone to collapsing and slumping. So this is my fourth tip. Now my walls are the height I'm after
I can give my bowl some more volume and shape. With a rib, with my sponge, with my fingers.
So I'm stretching the clay out into that rounded bowl form I'm after. And that's my fifth tip.
Shape after you've got the height. It's really hard to pull up more clay once you've started to shape
your pot. Also take into consideration that the walls will shrink a little as you stretch the clay
out to the final width. And of course I can't resist adding a swirl. I smooth the rim with a chamois
and then set aside to dry to leather hard. My bowl's ready to trim so I flip it, center and
fasten to the wheel. I'm using clay lugs to secure my bowl. I start by removing some of that extra
clay around the foot. And as I trim the outer wall I'm keeping in mind that I want the outer
shape to reflect the inner shape of the bowl. And now I trim across the base. I'm just trimming a
slight depression into the base. And then I smooth around the foot and the trimmed surface. I remove
the lugs and flip my bowl over to take a look. I let my bowl dry and I bisque fire. I glaze a couple
of bowls with simple glazes but with this one I'm going to try something different. I'm going to add
some glaze spots but in reverse. So I'm going to use resist to create various size spots and then
glaze. When I'm finished I'll remove the resist and fire. So I'm using a latex for the resist
and I'm using some sponges. The sponges get a little crummy with latex bits after use
and they're not so easy to clean. So next time I might use brushes. And now I glaze.
Simple right? But I still have to remove the latex before I fire. These wide shallow bowls
are super useful and very versatile. So let's recap my five tips. Number one, use soft responsive
clay. Two, throw in a bat so you can remove your pot easily. Three, leave extra clay in the base
to support your walls. Four, pull the walls up evenly and slowly. And five, pull the walls up to
the required height before shaping. Feel free to add your favorite tips below. And if you want to
make pasta bowls that fit really well with these shallow bowls, check out my pasta bowl video.
As always, happy potting!
