30" Encon Princess 5P30WPD Ceiling Fan in White and Polished Brass with Bleached Oak Blades

TV Electric Fan
2 followers
9 Video Views·Jan 29, 2026
A showing of a 30" Encon 5P30 WPD Princess ceiling fan installed in the media room. This one is in white and polished brass with bleached oak blades.
Hello viewers, here is the Encon 30-inch ceiling fan with light fixture model 5P30WPD or more
commonly known as the Princess. Here's the information tag on top of the motor and this
model number is different than the one on the box for some reason and it's dated 2001.
And you can pause this at any time to read the rest of this information up here.
Here's the original box it came in. It says manufactured for Orchard Supply Hardware
which I'm guessing was a store in California. It's item number 78060 which is perhaps specific
to that store. This particular unit is in the white and brass, more specifically polished
brass finish. I'm not sure what other finishes these were available in. The included light
shade is being considered a or an opal dome glass shade and the blades are reversible
from white to bleached oak. This box has quite a few different stores and companies listed on it.
On the top of the box it says manufactured in China, Angelo Brothers Company and that's out of
Philadelphia, Pennsylvania with a copyright of 2001. And there is a website. It was a little
bit early for websites in 2001. Perhaps if I recall while I'm editing the video I'll try to
visit that website and if it still exists I'll include a screenshot or perhaps I can try to get
a copy of it from the Internet Archive website. I really have no idea what the correlation is
between all these different stores listed on here. All of these tags are like just sticky
pieces of paper that are adhered to the box so I don't know if these are stores that it just
happened to pass through during the importing process or what. This item number tag is also
just a sticker so perhaps, oh that wasn't the frame, this item sticker down here. So perhaps
these are all variables that can change depending on where it was sold. Speaking of where it was
sold I believe that this was potentially sold in the U.S. and Mexico which is kind of an unusual
combination. I don't see a whole lot of stuff here that's sold between both regions. The box is in
English and Spanish which is very common for stuff sold here in the U.S. But the Spanish portion of
the box is in metric units which is not typically the case for something sold here in the U.S.
So that's one thing that would lead me to believe it was sold in the U.S. and Mexico. Somebody else
has confirmed this as well at this point. I'm also now noticing this Antz logo here which is something
I have seen before on products sold in Mexico. I don't know if that's a store or some kind of a
safety certification but that definitely is a an indicator that this was also available
in the Mexican market. I suppose it makes good sense that something would be sold here in the
U.S. and in Mexico because the electricity is the same. Here's a look at the rest of the top of the
box. English and Spanish instruction manual. Interestingly enough, this is able to be
flush mounted which is kind of unusual for a spinner. But I guess it is a bottom-mounted
spinner so I suppose it's not inconceivable. Reversible motor. Unique true balance clamping
system. What a bunch of baloney. It's just a basic ball and socket configuration that
so many ceiling fans used and so many different brands had a different
terminology that they would apply to this very generic mounting system. I can't imagine that
any of these phrases actually got successfully trademarked. There is no trademark logo after
this so it probably wasn't. And then I guess this is supposed to be pictures of the manufacturing
plant. It looks like some chemical spills and reels of tape. Quality components and then this
says you need a ladder. Pliers. I'm not sure what you would have used the pliers for. I certainly
didn't use any pliers when I did the install. And a screwdriver. Here is the side of the box
we have some additional features that were not mentioned on the front
such as this lofty claim of it moving over 4,000 cfm. I don't know about that. It's definitely
no slouch in performance but because it's such a small fan I think it would be difficult for
something with this surface area to push that much air. Now I did finally get some insight
on how the ENERGY STAR standard that was introduced in the 2000s measured cfm. I don't
know if this is before or after that standard took place. This might be before it. I don't see any
ENERGY STAR logo on this packaging so quite possibly the ENERGY STAR standard method for
was not used so we really have no idea how that measurement is being taken.
It also claims that it's remote control adaptability or remote control adaptable
which is not really a feature specific to this fan. I don't see why you couldn't put a
remote control kit on pretty much any ceiling fan at this point.
Maintenance free doubly sealed ball bearings never need oiling.
Now they do never need oiling because they take grease but
durable liqueur coat plated and powder coat painted finishes. I have to say the finishes
on this are generally quite nice. I always thought that ENCON was kind of like a cheap junk fan
brand but this has really been a pleasant surprise. Versatile mounting system for stapled
or standard stapled installations. Technical assistance phone low line. Something tells me
that that telephone line doesn't give you a lot of help. Here's the other side of the box which
I think is identical. Yeah it is. It's nice to have decent sized pictures of both configurations
and it does have a 10 year warranty and there's no asterisk after that so maybe the warranty is
actually decent. Now this side is in Spanish and there is the 76 centimeter which was what
threw me off initially because it's very common to see English and Spanish for stuff sold here
but normally the Spanish side still has stupid dumb inches and feet trash which is such a dumb
and stupid system of measurements but on this one the Spanish side is a metric which is an
intrinsically superior system. On the bottom of the box we have the San Jose address again for
the Orchard Supply Hardware Store and then I'm not sure what this tag is used for but it says
30 inch Princess Fan 5BL for blades. Sounds like a snake in here. Here on my dusty table we have
the original instruction manual which this is exactly how it came out of the box. The box
appeared to be originally sealed when I got it so this is how the factory put it in.
Here we have yet another model. Model number 78060 and yet another brand. It says
Angelo Quality Sealant Fans. I don't know if that was a store or another OEM. I don't know
and this copyright date is a little bit older. This is copyright 1997 Incon Industries LP
and the whole thing only weighs 10.6 pounds. This video should be good enough resolution
that you can pause it and read this if you so desire to. I'm not going to read it to you.
Here's a troubleshooting guide. Now this is in the same location as
what was that other store that was on here? The Angelo Brothers. Oh it's the same brand. Okay
so yeah I don't know. There must have been two stores maybe that this was built for. I have no
idea. So that's the manual. This is revision number four and this is dated 97 and then I
think that this is this no this is different. Here's the parts list. Nope we're not at the
parts list. This is the warranty card or it asks for all sorts of information that I have no idea
why you would need to process the warranty. There it is in the Spanish and here is the where the
parts list was. Light kit installation and here's another sticker that was kind of put on here. So
again it seems like this was heavily customized depending on what store it was sold for who did
the importing etc. That is I think the same number that's on the motor itself P30-5BL-1L
and here's your your parts list with another model number.
Notice how there's no cell phone on here so you can tell this is definitely old.
Okay we got a couple more pages to show. Important note if light glass holder screw
head is difficult to turn. Oh what does that say? Lightly use screwdriver. No rude comments.
The operation and maintenance guide in Spanish. Get a picture of that for the Spanish viewers
and here is the the manual in Spanish which I will show for the Spanish viewers.
Okay that's all for the manual. Let's take a look at the fan itself.
I think this is quite a nice looking fan. Nice milk glass shade or the we call it opal shade
with brass accents around the bottom. Encon pull fobs. Nice brass hardware everywhere.
A lot of brass accents on this thing. Gives it a nice classy flair. Here's the blades. This is
the bleached oak and each blade does have a slightly different pattern to it or at least
I think it's different. Is it the same? It might be a little bit different and the quality of all
these finishes is pretty respectable. Of course I'm sure it's just some cheap pot metal or stamped
steel or something that's got a plating over it but it's very respectable quality. I don't see a
lot of imperfections anywhere. Paint all looks good. We got labeling on the switches. That's
the light and then this one is for the feed and reversing switch and these are not imperfect. Oh
no I guess those are imperfections. Well some specks on there but I mean you can't even see
that from more than a couple inches away. There's what the blades look like on the top. The white
finish. Very standard solid socket mounting system. There's absolutely nothing unique about.
I have the typical s14 shaped 11 watt into second bulb installed and there's the light socket.
Let's turn it the on. I think it's on low. Let's shut it off. Nope it was already off. So there's
the light. I have a very dim bulb in there because I don't have a dimming switch in here right now
and I really prefer the fan lights to just illuminate the fan not to light the room. I
think ceiling lights are worthless for tasks because it will shade everything that you stand
in front of. So these 11 watt bulbs I think are a pretty good fit for the way I use the fan lights.
Just enough to add some illumination to the fan. Nice aesthetics but not enough to create annoying
shadows in the rooms. The bearings did make a scraping sound. One scrape per rotation when I
first started it up but after a couple of hours of operation the bearings broke in and the sound
went away. As you can see the bearings are spinning quite freely now. Okay now we'll begin on low.
Very quiet. This unit really has been a pleasant surprise in terms of quality.
I don't really have a lot of experience with Encon fans. I guess I remember seeing them at Walmart so
I kind of felt like they were just cheap. But I guess I got to keep in mind that Encon was also
behind stuff like the Crump and Grieve series which were very high performance fans built for
the Indian summers which are much hotter than the summers here in the U.S. and those were excellent
high performance fans. And this is completely silent. I don't hear anything from this at all.
Very very quiet. Now I do want to try to calculate the CFM so we can find out if the
claim on the box is bogus or not. I think part of what bothers me about that claim is that it's just
a nice perfect evenly round number. If it was like oh it moves 3,742 CFM okay at least like somebody
calculated it and used a formula and measurements to make a determination. But this is just like
4,000. Okay sell it. I don't believe it. It is very powerful though. So I want to find out what is the
we'll take out about an eight inch circle in the middle. And again this is a very
rough estimate as I've said in the past. This is not a precise measurement. This may not be
matching the way that the manufacturer measured it. But what I'm going to do is I'm going to
calculate the surface area of the blades. I'm going to exclude that eight inch circle where the irons
of the motor is. You know the irons like the arms where there's no movement because I don't feel
any air pass where the blades stop. So calculate that area. Subtract the circle in the center
and then it's area times velocity in feet per minute or whatever the heck it is.
And that will give us the CFM. For those of us that like the calculations I will show
how I'm doing this here. If you don't like this part just skip it. So it's a 30 inch fan
and we're going to minus the eight inches from the center.
So let's calculate. We have to put 30 inches into stupid dumb hands. So that becomes 2.5 hands
and then we've got to cut that in half because we need the radius. So it ends up being
cake times 1.25. Where's the square button on this? Square because it's pi r squared to find the
area. So that is 4.9. So that's the total surface area of the fan but we have to subtract the eight
inches. So we'll do eight divided by 12 to put in the stupid dumb hands. That is .67. We'll cut that
by, shoot, it's that stupid dumb brain rot trash click talk garbage number. We'll cut that by two.
Now we get .34. That's a little bit better. And then it's going to be cake times .34
squared which is .36. So we're going to do 4.9 minus .36 and we have 4.54.
So now at this point the CFM equals
velocity times area. So 4.54 times the wind velocity times velocity which is going to be in
what is the unit that we use here? I think it's feet per minute. Yeah, the velocity which is in
stupid feet or hands per minute. So that's our formula. So let's take a wind speed reading now.
And I have to say as I'm sitting here doing these calculations I can feel it pushing air.
I feel more air from this than I felt from the SMC fan that was in here prior.
That doesn't necessarily mean that the volume of air is higher. It's just the way that it moves the
works better in this particular room. A lot of times we can't get a CFM reading on low
because this meter is not sensitive enough. But this is strong enough I think that we'll be able
to get a reading. Just barely. That 201 pretty stable there. All right we're going to go with
201. So I'm going to type into my calculator 4.54 times 201 and that equals 9,000.
And yeah 9,000 CFM. 912 CFM which is pretty good for a 30 inch fan. It's not bad.
So let me see if we can get a RPM here. And this as we know is a total hit or miss.
As far as it's not working better with these polished brass irons,
I think it's picking up twice the number of blades because there's two shiny spots that
it's seeing per blade. That was 638. I got something around there a couple times.
So if we do 638 divided by 5 that's 127 RPM. Yeah I can see that. So that's 912 CFM and 127
RPM. So quite fast for a low but it is a tiny fan so that's to be expected.
Really quite respectable pitch on this. I didn't know that these were high performance units for
whatever reason. I just thought this was kind of cheap junk but no this is really quite respectable.
I'm glad I have a small room like this in this house. It probably looks a little bit too small
on camera but in person it's a very good fit for this room. I think this is an 8 by 9 or 8 by 10
room. That's not too small but it's small enough that you can use a fan like this and it works.
It's powerful enough and it looks reasonable. I always like this shot from inside the kitchen
here where you can see it just inside the doorway. I remember years ago many times
seeing ceiling fans like this and just barely through a doorway or through a window or something
like that. I don't have the means of capturing the power information in this setup in here but
I suspect it is moving or I mean I suspect it's not using very much power. It's a small motor.
It can't be much more than a 53 by 10 or 12 but that's all you need for a small unit like this.
Do I feel air coming up the side of the wall? Actually yes I do. It's not a tremendous amount
but I do feel a touch of air recirculating up the wall. I certainly feel a pretty good
stream of air directly underneath it. I'm very impressed with this in terms of performance
and it remains quiet on all speeds. On medium, very quiet. You get a little bit of air noise now
but that's about it. Nothing unreasonable. All right let's take another wind speed reading.
423. Pretty steady. 432. 451. Wow that's a lot. So that's 2047 cfm according to these calculations
and sitting here at the table tremendous amount of air. I'm going to have to try this in a larger
space. This fan seems to push air out to the sides very well which makes it feel much larger
than it actually is. I've had 52 inch fans in here and this is about as much air as I feel from them
you know not directly underneath it. This is extremely impressive performance from this thing
and it's running fast but it's not like outrageously fast. It's not like that
smc was. We're just going to take an approximate 1500. It was doubling the numbers a lot
but I got several that were around 1500. 300 rpm already. It seems a touch fast.
1824. This is the most inconsistent reading I've ever gotten with this thing. It's just all over
the place. I know we're not using it the way it's intended to be used but it usually works a little
better than this. I gave 2344 several times so let's see 2344 divided by 5 is 460. We got to cut
that by 2. I think it was reading it twice. 234. That seems reasonable to me. 234. The reason why
it's reading it twice is because it's picking up each side of the blade iron so it's getting two
readings per pass of a blade. All right let's go up to high. The motor remains silent. There's a
that's strong. I'm really curious to see what the cfm is going to calculate out to.
557. Okay that's a number 557 times 4.54. That gives us really only 2,520. It's not a big jump
compared to medium. What did we say the medium was? 151. I'm surprised it's not a bigger jump
than that. So we're only getting 2,528 cfm which seems like a pretty reasonable number to me.
That's you know pretty respectable for a 30 inch fan. I think that that claim is probably measuring
it in some weird way that that increases the surface area of the tested area. I can see why
they did that because this does feel like it pushes air out to the sides very well.
But at the end of the day I feel like that's a complete inaccuracy of representation of the
product. It should just be the air coming off the blades. It shouldn't be like a perceived cfm if
you will. Okay and that's 273 rpm. This is very similar to the craft made piccolos. It's very
quiet, pushes a good stream of air and the air pushes out to the sides nicely. That's definitely
what this reminds me of the craft made piccolos. This is a little bit louder than the piccolos
but the piccolos are kind of unique because they are almost completely inaudible. I don't know how
they do it. Very powerful. I can feel a tremendous amount of air kicking up the side of the wall here.
The clock of the blades is is pretty impressive too. It's not usual to come across those you know
ceiling fan blades in that good of alignment. Unfortunately it does wobble a touch but not too
bad. And the things are running this fast it's pretty hard to get it in perfect balance.
It's in a good enough balance I wouldn't I wouldn't even bother trying to mess with it.
Okay now we'll cut it off and I'll show the spin down and then we'll come back once it's dark out
and we'll take some pictures of it at night. And here's what it looks like at night. Dirty? Yeah
I think it was. But it's clean now. Much better. Much clearer. Good grief that was filthy. The heck.
