FOR ALL YOU SOUTH PAWS - Lift RS Build (In Depth)

Defending with Past Crossbows
3 followers
10 Video Views·Jan 25, 2026
FOR ALL YOU SOUTH PAWS - Lift RS Build (In Depth)
Comments are disabled for this video.
Dan, what's up? Looks like you ordered a bow. I didn't order a bow. Oh uh shoot I ordered a bow.
How? You had your like Matthew's page open and I hopped on there and sent them a little email
and they're pretty they were super supportive and they sent me a bow so. Okay so I guess Riley
ordered a bow. You don't want to build it do you? I don't want to build it. Do you? Mind if I help?
Hell yeah. All right let's actually get done right. Stabilizers, quiver, rest, grip,
silent connect, v-bar, bow stand, no sight. Good you can spend some money at Spokane Valley Archery.
Wonderful what do you want? Worry about that later. Well we'll cross that bridge when we get there.
I sure do not have any left-handed anything in this facility and I actually don't feel bad
because he helped himself to like how much do I owe Matthews? That's a big P.O. there buddy.
Usually when it's two pages you can tell it's going to be here. Oh boy we're not going to
financially recover from this but no this is Riley is you know family and he shoots a Matthews. He's
got a Halon. Is it Halon 6? Yeah. And I mean he killed his first elk this year super pumped just
like you. You guys both you know first archery elk kills. Great but it's time for him to step up
his game and if you set this up it'll be a lot faster than me. Let's do it. And probably a little
bit better. Maybe. I guarantee. I guess guys I'm leaving. I'll film. You're in front. This is
Michael Allman and he's going to build your bow. Sounds good to me. Let's go boys. Perfect.
Silent connect right there. There's our V-lock. MX2. Quiver. Stabilizer and the contour. Awesome.
You feel all the grips already? Yeah I have. Perfect. So contour is what you like. Good deal.
So lightweight. That's crazy. Yeah that's good looking. Mods. Okay got this. Perfect. I was
going to say we need to get this out of the bag because the RS they are so compact and lightweight
you actually have to have their spacer system that they come with in order to get the quiver to
mount properly. So we got all that. I guess let's just go ahead and start by getting some stuff on
it. We're going to take this grip off. Throw on the contour. Open that up. That's a good feeling
grip too. The contour is kind of I feel like it works really well for a lot of the angled grip
shooters where it's got that narrow throat so when you get your thumb and your index together
it ends up fitting really nice that way. Right. Let's go ahead and grab I'm just going to throw
some things on here and then we're going to do we'll do basics first. So we're going to do
rest. We don't have a sight to put on here right now but we'll put a rest and then put some other
things on and get a basic tune. Get the people where it needs to be and get a loop on there.
Sounds good. Okay awesome. Let's get rest going first. Mods are good. These strings look awesome.
Got a grip on there. That's the baseline. We're going to get our QAD on there. Comes with a bunch
of little knickknacks and you don't necessarily need all of them. I usually like to put the
like little felt on here before we actually get it on the bow. Okay. And it just makes it a little
easier on us that's all. There's no particular reason. Felt is on there. Riley do you have a lot
of interest in doing this stuff yourself? Do you want to you know put some hands on this or? I
definitely would like to yeah I mean yeah if you want to guide me through and I'm not too familiar
as is the reality but I'm trying to get more and more familiar and that's just been the baseline
from YouTube and whatnot so it'll be good to not only be able to see it but at least if you can
talk through kind of what you're doing. Yeah so first off here rest mounting on these is really
easy. Matthews they actually put a little indent right there on the riser to mark the center of
the bow so the way that Matthews works compared to some other brands is Matthews bows shoot
they're they're supposed to shoot through the center of the bow exactly your grip is below
center the cams are almost identical and anyways they shoot through the center of the bow. Now
the thing about shooting through the center of the bow is sometimes you don't end up getting
the leverages that you like exactly so that's why I usually go up just a little bit but we
will worry about that later. I need a little tiny allen wrench. So what we're gonna do on here is
just get our rest mounted close we're not gonna actually get it gonna get it right on the line
while it is a good idea and that's how Matthews has these bows set up. I find that they usually
like to be just a little bit high they hold a little better so I'm not going very far up at
all. All I'm gonna do is just go on the top side of the line it's not even barely off the line at
all. There we go okay left-handed bows are always fun because they have to they make me have to
think because I mean you do so many right-handed bows in a day. So how many left-handed shooters
would you say like percentage wise 20% of shooters or less? Oh way less. Bridge lock bars they are
nice for a couple different reasons. One big reason being of course is of course using all
Matthews accessories you can actually get your vibration down crazy with these. These bows are
already insanely quiet but having this connection point makes it even better. The cool thing about
the bridge locks though is how easily you can adjust them for not only playing with leverages
but also put them in a case or anything that you need to do like that. So of course you can
loosen that wing nut bring this all the way in put it in a case or while you're out shooting
if you just want to try to play with the lever just a little bit put it in one notch make your
stabilizer a little bit shorter. So that's a great system that they have. Yeah your RS is
going to go from the front cool. This is more similar to actually how I run my bars. I run
them both from the front mount on my hunting bow for no real reason just that I like it. So what
it does too it changes again changes your leverages and when it comes to shooting really well too
adjustability in a bow is a big deal and being able to play with different things like that your
leverages is a big deal to get your hold as it needs to be and also to get your arrows to hit
behind the pin how they need to because a lot of times if your leverages aren't right and you have
too much weight in the back it will hold really well and then your bad arrows will end up going
high or you'll just have weird flyers and so it's about finding that balance of course. It's very
easy you see there's little notches on here it's very easy to miss them but they actually align
with the all the vertical spots here so all you have to do is just make sure that one of those
vertical bars aligns with where that wing nut is going in. Yeah so as far as adjustment goes I mean
I'm looking at my pin float primarily. The pin float is the biggest thing of course you're hitting
behind the pin is going to come after you kind of figure out how you want your bow to hold but when
it comes to my pin float I'm looking for am I getting a lot of this movement and am I getting
a lot of this movement sometimes it can be how your bow is actually grouping and just different
things like that but yeah it's going to be if I'm bobbing high a lot and I'd wait to the front
if I'm kicking let's say that I get in here and after we put our state like our quiver and sight
and everything it goes on the left side here it's pulling to the left and you're having a hard time
keeping your bubble kick that bar out a little there are also different things you can do to
induce bias like that where you purposely kick your bar out so that you have to use more arm muscles
here more engages in your wrist and your forearm that ends up having you hold steadier even though
there's such a crazy bias to the bow getting it to be level what has you hold steadier so there's
different ways you can do that but we'll mess with that another time I'm sure once you get this thing
sided in let's go ahead and throw the only other things that we'll have to throw in here right now
since we don't have a sight is going to be silent connect and the quiver so there's your silent
connect cover right here it's covering those threads so you're just going to remove this
sticker like this exposes those two threads and this does not go outward it goes inward
and the reason being is that when you hook your loop on there it'll actually stay
hooked on and you can tell really easily because we'll see it'll say scs facing outward
and we're going to grab this one the top one of course because if your bow falls hits against
something so there's there's kind of two ways to look at it when it comes to bringing it up the
tree whatever is going to hit first is probably going to be what you want to protect so going
upside down can be helpful because your bars are in the way of your site so they're going to
protect your site right as you're bringing it up when you're going down the opposite make sure the
bars are going down so hook it to the top so you can kind of go both ways that way but it all really
doesn't matter too bad if you have a pretty good route which if you scout out in there you know
set up climbing sticks and stuff you can probably build a pretty easy route for getting up and down
what kind of site do you want to run have you decided it's a hard choice i do like i listened
just to the i was editing the podcast that they were doing and i feel very torn about the single
pin uv um i like the idea of that i do like the excel driver but i it's a it's tough i mean i
added to the video that they made and it was there were good points on both sides of it so
what do you uh what do you personally favor between the two i think that the matthews
ultra u slider is a great site all around i think that the one place that it really falls
short in the west is that a lot of these states out here don't allow lights in your site right
and so drop count two when you are paying 700 for a site yeah that you're not going to end up
using the light on at least for idaho for washington it's kind of hard to justify because
they both are great sites like the the driver or the uh landslide or sorry the driver or the
uv now could they easily make a little change and sell a version that doesn't have the light
but um it is only such a i mean when you're talking about how many hunters in the country
are actually not allowed to use lights most of it of course is in the west and 90 of hunters
are east of the mississippi yeah so it's kind of it would just be another thing and i understand
why they don't do it but um yeah i mean they're both great sites i have no giant problems with
either um i think that the i think that the driver has a lot of nice aspects about it as far
as it's very tough i've run excel for a while um and i've been very impressed with how
um sturdy they really are because they don't feel super sturdy right they've always had their
you know the carbon bar and not always but they've had their carbon bar for a while and
some of their stuff feels really light and kind of like a toy but it's just very ergonomically
designed and it's it's made to be really light even their older stuff and their new drivers
even lighter of course but um golly that's three me dropping everything today i've always liked
excel's uh micro adjust pin movement as well okay that's a big deal um uv doesn't have that yet
i don't know if they're going to do that but that's something that the excel definitely has
up on uv is micro just pin movement i mean number of pins wise what do you think is the i mean i've
heard that go all sorts of directions but for hunting out west what do you think is the the
number to go for i think that three or five is smart um i think that in north idaho where i hunt
primarily um and this can apply to a lot of different areas is it being so thick as it is
the odds of you having a shot beyond 40 yards right are pretty low and so having three pins
20 30 40 that's going to cover 95 of your hunting scenarios and when you do have a different
scenario that you need to yeah dial out to 55 62 whatever it may be um really you should have time
to do that you know um i'm going to take this bar off for just a minute while i get this good
amount on here so i've never had a problem running three pins for north idaho three pins on a slider
and i have run a landslide for the last little over a year do you comfortably run that in south
idaho antelope yeah i actually ran yeah i ran the same thing three pin slider um same idea i mean
at that point i really treated like a one pin for the most part um because yeah i mean it is it is
a different game for sure um but i also the way that i set up my sliders is i have and this is
something that's really nice about the uv slider is i have indicators for for my pins so on my
landslide i have two indicators for three pins the uv slider has three indicators for three pins
so you know what your range is for all three of your pins which is really nice when you are dialing
to a long range because let's say that this let's say you are animal hunting you dial down toward
your top pin is at 60 let's say your top pin is at 62 that buck takes a couple steps what are you
going to do are you going to redial or are you going to know on your site when you initially set
it okay my top pin is at 62 my second pin is at 68 and my bottom pin is at 75 whatever it may be
you know you have those three gaps you know what those pins are you can adjust to the situation
and go from there right i think three pins is smart for that style of hunting um but if you're
not going to be shooting beyond 40 yards a lot sure one or three pins would work just fine okay
yeah and then xlm legs we're not going to put on yet because we're going to be using this press
and these don't really like to work in the press while we're at it we have our quiver mount on here
so this like i said this bow is so compact and we're going to take it out of here before we
really do this but anyways so compact that as you can see the hood right here actually has to be
and even then it is still a very tight fitting setup as you can see it has to be shimmed over
just a little bit to the left because this thing is tiny and a killer what we're going to do here
it's kind of a similar setup to what i did with dan's is we're going to go just a little bit high
these bows um just the way that they're designed i i think part of it has to do with where the
peep ends up in the string as well um well the closer you have your you know 10-20 grain peep
to the speed knocks it'll throw off the balance of the string slightly and what i think what i
think that's part of the reason why these bows like to be a little bit knock high pointed down
it's not all the time but it's a lot of times enough to where i'll usually just to ward against
it i will set up a little bit high so this is going to be perfectly square with the rest right
there on a 246 and what diameter arrow are you shooting uh i'm shooting this on a 60 okay so
it's pretty much a standard yep so we're actually going to go so i would normally go right about
middle for any smaller diameter because then it's going to be this is meant for you know six 6.5
diameter arrow um i would normally go middle for anything smaller but i'm going to go just a little
high maybe a little bit towards the top hash and worst case scenario if that doesn't end up tuning
out right and it's knock high we just move this rest up so rather much rather do that than get
into this and the knock not be high enough and now you have to move your entire knocking point up so
i'm gonna get this here i'm handing me one of your arrows with the knock you'll be shooting
okay so we got the easton looks like an h knock and we're gonna do find some knock sets what i
usually do you get enough for both knock sets it'll take about two to two and a half feet
of serving wax the entire thing always wax so that it bites otherwise these knock sets will
come undone and we'll wear out okay so now i've got that i'm just going to burn it in half since
i got that like two and a half ish feet take one of these i'm just going to leave it on the string
don't need it yet i usually start at the top and we're going to tie double overhand the works
there and underneath stacking away so meaning our first knot is the only one that's actually
touching the knock and when we finish this it'll be further away the reason that we do that because
if our finishing knot that we burn off at the end is touching the knock that's going to get the most
wear and that's also going to be the weakest point is where the knot finishes so that's
where we want to make sure we tie it away from that so that'll be four double overhands on each
two on each side of the string here and we're going to finish that off for the top and then
we'll put six on the bottom in just a minute knock out of the way so it doesn't melt
there we go top knock set there strong not going to move on you and starting our bottom knock set
this is the important part we're going to get our spacing right where we want it
so right here we got a really short axle axle bow 27 and three quarters we're going to want a little
bit more play than we would have on a 33 or even a 30 inch bow or 29 and a half inch bow
want just a little more play because it's going to draw to a sharper angle but his drawing is
short enough that it probably isn't going to be terrible so this should play right about here
and once again we're going to tie away another reason being is if we tie towards if we start
further away and tie towards you end up pinching together and as the knock becomes looser it ends
up pinching the knock so we want to tie away once again make sure that our finishing knot is away
from the knock that's four there take your knock out of the way get this point off
there is that got the right knock fit if your loop ever comes undone you have that to keep
you there just tie a new loop on that so we're going to get some basic measurements from the
other bow actually while we're here we might as well get our cable dress cable into the cable
of the bow we're always going to do for the QADs it's going to be on the cable running down to the
mod not to the yoke that's going to be the one that's going to get pulled downward as you draw
we're just going to split it about 50 50 pull it all the way tight and leave it there when we draw
this back in the draw board it will end up pulling and timing itself so we're going to leave that
there for now grab the other bow this one we're going to put the peep in first reason we put the
peep in first and we'll adjust it when we need to but we put the peep in first so that when we
tie our loop it doesn't get moved around from putting peep in the string so we're just going
to tie it to what it should be so peep just in the string just to be in the string because what
happens here is as you separate the string it's the same way like a bow mar peep tuner works
when you separate the string it rotates the string so since we've separated this a little
with that peep this is going to turn a little now we're going to tie our loop get it straight
and then we'll get our peep height so okay always whether it's a left or right-handed
shooter the bottom knot faces you so on a left-handed shooter what we're trying to do
is because your release angle when it comes back is going to be running at this direction here and
so we want our loop to be this way on the string so in order to do that it's going to be sitting
like this and we're going to do a knot like so we're going to pull that tight
and then we're going to go so if you look at the string here we are can't really tell from
where you're at but this is on the right on the far side of the string here so now we're going
to cross it back over the front side and come back through and finish our loop that way
and our loop measurement was 525 so 525 thousandths so we're going to try to get it
close just to help this bow fit Riley a little better right off the bat let's see where that
gets us first it might be a little bit long we're looking for a little bit short right now
yep that'll run right there so what's happening is i bring my caliper in the caliper basically
goes to the back of the string we're going to really cinch this down it's going to tighten
down to the exact length we need and as you can see this is pulled tight now so we'll end up
tying that off we're just going to see around here and we look like it looks like it's going to be
pretty short right off the bat
that's going to be really close right there so it gives us a good starting point
here the bow is pulling 52 this one's pulling 66 right now and what poundage do you want it to be
at between 60 and 65 is where i'd like to be okay and then before season i want to get up to like
cool so back this off one half turn and that should get us probably about two and a half to
three pounds so from my understanding by the design there's basically a 60 to 80 version
and like a 60 and below version so there's a 41 to 60 and a 60 to 80 yes okay yeah two different
limbs um both use the switch weight mods there's no difference in the mods an 80 pound mod on the
60 pound version shoots at 60 pounds an 80 pound mod on the 80 pound version shoots at 80
we'll cinch our loop down all the way because the peep is straight
that now we'll check our measurement that we've cinched it down all the way and it's right on
the loop is good all i'm going to do is really simple so for the qads when you run it through
that cable down there all we do is one loop around and then back through on itself and
we're just going to cut and burn that's never going to come out on you and it is timed properly
and the main thing is we want to stay away while we're burning this a couple ways you can do it
but i usually like to do it this way and i'll just try to keep that string mainstream away
if i can
here we go string's fine
boom okay qad is good i'm gonna tie in this peep and we're gonna be right about there we'll shoot
it through paper once but you will need a sight at some point and once you have a sight it'll be
good to go i was ready don't have a sight on it but that's it we're going to just make sure this
thing's shooting a bullet through paper all right there is that so i'm gonna go ahead and see what
we've got it's weird not having a site i know yeah so really really just kind of estimate here
yeah you're good to shoot through paper but we'll straighten out that site in just a minute here
does it feel fairly natural that peep sight height go ahead and get into your full anchor
yeah it does okay we've got a left hair there so we have a knock left right now what knock left
means is our cams are leaning a little bit too far this direction with the bottom or with the
lobe of the cam pointed to the left as of right now so what we're going to do is we're going to
bring the limb towards the point so if we have a knock left hair what we're going to do is we're
going to bring the limb towards the cam what that's going to do is it's going to lean the cam a little
bit to the right so as we bring that toward it's going to lean the cam this way it's going to move
that knock left into a knock right okay so we just need to remove our cap screw and we can actually
keep these off while we're tuning and bring them in like so then comes in the same thing on the
bottom so we're going to see where that gets us ideally we would want to tune with our sight on
as well because that may change the leverages too but it's very unlikely the sight is so center
on the bow and it really just changes the weight center wise doesn't really change your leverage
around okay so but we should be good there let's go ahead and do another and see what we get
all right just go ahead and only think about working through your shot here get your finger
right just barely touching the trigger and just slowly only think about moving your finger and
just wait until the release break beautiful really good shot okay so we're still knocked left here
it's come about halfway that was a much better break there good job Riley hold that arrow for a
moment so we're still a little bit knocked left funny enough you actually shoot a bow very similar
to me as far as torque goes I almost always have to deal with that same tear okay except the opposite
on a right-handed shooter trying to bring those limbs closer together
get a quiver back on
aim just a little bit left there you go go ahead and work through your shot just get your finger
touching that trigger just keep that finger moving so slow you could stop at any point
all right shot through your same tear sorry just being consistent good yeah go ahead and start
beautiful okay so now we've got those limbs closer together our left is completely gone
and we got a strong bullet right there and that took us what three minutes pretty quick so yeah
super simple it's been really helpful for the shop this whole limb shift system these bows are
super easy to set up and even with no sight on here I mean you could still shoot this thing
all right folks Riley's 19 and he's employed by me
fiscally needs to be responsible all told he just ordered what is that maybe three or four
right 33 3300 he's out of money he can't afford a sight I had an extra uv slider hashtag spoiled
and he's a southpaw so what we're right doing right now see if we can flip this thing upside
down and make it work for him so that he can have enough money to put gas in his truck here we got
uv slider upside down that's actually how they made the left-handed ones of the original
generation uv slider unfortunately this bolt in here was already stripped so anyways we weren't
able to flip this over but all the difference is is the bubbles at the top of the housing
it'll still work just fine took the light out for hunting in Idaho all we're gonna do here is yes
we're gonna mount it but our main goal here is not to just get at level with the bow itself
to make sure the first and the second axis match when it comes to leveling a bow
all that truly matters is that your first and your second axis match meaning that your first axis here
and your second axis the scope are the same so that when you move they move on the same plane
when one of them is off a little bit it'll end up at further range you'll hit left or you'll hit right
then at close range and it can also be caused by third axis issues but that's the main thing
so we're going to make sure that our first and our second axis match can you level on here
and our first and second are close but not perfect unfortunately these don't have
a second axis adjustment these uv sliders so really the only way
to get them to level is to play with the bubble slightly
i'm looking for let's see here i'm going to use our first axis adjustment screw and loosen
i have a question yeah so i know that this generation of
sight is known without the sight light to be a little bit dark is there anything that can be
done to improve that since i'll be hunting in a state that doesn't allow light insights
the best thing that you can do best thing that you can do is coil your fiber as much as you
can out here because that is going to be the biggest way it's going to take in light
and these sites don't always come with a full coil
this oh my gosh i got frankenstein parts bro oh you got parts you got parts
what do you think of this bud
that would be great if i could get this bolt loose this bolt here stripped
i tried to get in there i couldn't even get the allen to turn
sorry look at that double pin double pin even unfortunately not even as bright as the
larger housing but really all you can do is you can just coil up around here we will use this
any other parts you need we're good yeah in fact we're almost done
okay so bows level sights level bows built you just gotta sight this sucker in
and i mean bows tuned got everything tightened down and built up so we're gonna go outside
at some point get this sighted in o'reilly get some shots congrats dude awesome that's
a great looking bow thank you so much hope you kill something with it that'd be awesome man
yeah i can't wait
nice guys this is my nephew riley 19 years young killed his first bull last fall taking
him bear hunting with me in alberta we're also taking a subscriber with us to saskatchewan
with no paywall giving back to your channel we appreciate your support we depend on it quite
honestly thank you to matthews for providing this for riley and he's out of money so he got to hand
me down first gen uv slider that is stripped out we were not able to flip the scope so your bubbles
on top but you know what if you just stick with this it'll be what you know yeah i like it which
is good i want to thank michael allman from spokane valley archery for building this bow he did it
faster and better than i ever could i think you guys should really dig in on working on your own
equipment and don't fast forward this video don't watch it 2x speed he says a lot of stuff in this
video that's really helpful for your journey lastly you you southpaws you lefties all six of
you out there in this world plus riley wanted to finally do a left-handed bow build be on the
lookout we have a podcast with michael allman on the other channel make sure you subscribe to that
guys this is my nephew riley and he is going to be putting that work in separations in the
pushing and pulling pushing and pulling which means you're all pull and no push okay it is an
explosion it is just as much a push as is a pull okay and i i don't want to see this limp so let's
get this thing oh sorry i flipped this up that cost me a bull really three years ago i switched to qad
and didn't and i didn't flip it up i wasn't used to i've never flipped things up i've been a limb
driven rest guy my whole life and i didn't flip it up and this bull i was in idaho i had it was
like day seven or eight and it was just like terrible hunting and i i got up early out of the
spike camp that you and rod were sharing with me on horses okay and i went straight up that
backside okay i went to the top where there's water just at the very top and there's two water
holes one on the left one on the right and that's where all they'll get water and i made it to the
second water hole for the first time ever like i'd never seen this little water hole i knew about
the other one and i knew that somebody had put a tree stand on a long time ago but i found this
other water hole and i'm like my bows like this and i'm like oh my gosh another waterhole i got
to get a camera on this and then i hear a bugle and the bugle is close and i'm like it's just
getting light and i'm like there's a 320 six point no cows coming straight to water and i'm like oh
so i just got the bow got it here didn't flip the qad up he comes by and i'm and i'm like range
finding with my eyeball i don't have time to wrench and so i'm just going like 50 40 30 and
then when he gets to about 20 he just like hooks a 90 degree turn and he's headed to the other water
and i'm like i'm gonna draw slow and so i just draw slow as i can when i did that my arrow got
wedged between the riser and those two prongs on that rest and it goes he stopped looks and i'm
like okay all i gotta do while at full draw is just like take my thumb and get it flipped over
and i'm like it's so wedged in there tight that i boom and the whole arrow comes off the string
and i'm at 20 yards broadside 320 bull public land full draw without an arrow it's on the ground
and he just takes off running i lower down i set my bow down and i head butted the earth i think i
remember when you came home to camp that day and you weren't in a good mood so learn how to do that
you don't have to do that but in the heat of the moment it's just better to be cocked cock up okay
now you're you don't have to completely extend but just kind of like get that grip locked in
you're going to be slowly pushing and pulling get your aim done i'm going to ride with you
so you're here okay and you're still pushing and pulling good man and i like how this is just
dangling when you're done like that so
