How Dave Ardito Creates his VFX Videos (Part 1)
18 Video Views·Jan 20, 2026
Hello and welcome back, Zenderqueek here with a new video, and in today's video, I'm going
to explain and demonstrate to you how Dave Ardipto creates his VFX videos, and to be
precise, I will be showing you how to recreate this too late for school reel.
So I went through Dave's video back and forth and in slow-mo to analyze how the VFX were
created, and after doing so, here are the previews of the VFX that we're going to be
creating in this video.
I will be using After Effects to create all the visual effects shown in this video, and
in the description, you will find links to all the assets I used in the video.
So without further ado, let's get started.
Drop your clip into a new composition, move to the frame where the actor is checking the
phone and about to jump from the bed, and here you want to press CTRL plus SHIFT plus
D to get two clips separated.
And now I will move to the frame where I pulled the blanket, and here press CTRL plus SHIFT
plus D again.
Now the first part is useless, but I will just get this frame from it.
So right-click and choose Time, Freeze Frame, then make a cut and get rid of this clip.
So you're left with this short clip.
I will turn off its visibility for now, then bring my clip plate.
It may not be needed, but I always take a clip plate because it may come in handy later
on.
So I will rename it to Clip Plate, then freeze frame it, then extend it for the entire length
of the timeline.
Now for the clip where I pulled the blanket, I want it to be in slow motion, so I will
right-click on it and choose Time, Time Stretch, and increase the value to 300 for example.
This is good.
Now I will trim the timeline for just this area because that's all I need for this one.
Let me rename this clip to Subject, then turn on its visibility and draw a rough mask around
the subject like so, then increase the feathering a bit, move it in the timeline to start when
this clip ends, and now on this clip I will draw a mask around the bed like so, then increase
the feathering, and now bring the subject, scale it down, position it, and rotate it
as it should be.
Then turn it into a 3D layer, I will scale it down and position it right where it should
be, also rotate it like so, and add a keyframe for both scale and position, move forward
a couple frames, and lower the Z position like so.
Then enable motion blur.
Now if you're looking for a great visual effects bundle that contains everything you
need, I present to you Film VFX Bundle by AEJUICE.
This bundle contains 9 VFX packs, from universe assets to real clouds, plants, night, sky,
aura, 3D terrains to create stunning 3D scenes, and on top of that there is Big Impact that
has big explosions, shock waves, dust waves, and more.
This bundle also contains broad assets, lightning storm clouds, and finally Magic Pack, so everything
you need in one bundle.
And the cool thing is that this bundle is at a huge discount, dropping from $1200 to
just $347, and this discount won't last for long, so grab your chance and own this bundle
before it's too late.
And now let's get back to our tutorial.
I will go to the beginning of the clip and change the value of the Z position to 0, so
it gets back there, and now it looks better.
You can always adjust the position between both keyframes to get the speed you like.
Alright, I will go back to this clip and just fix the mask on this exact frame, like this
looks better.
Okay, perfect.
What I want to do now is add a Curves effect on this clip, because I can see that there
is a slight difference in the brightness of both clips, so I will add a Curves effect
and lower the brightness a little bit, so it matches with the other clip.
Alright, so now we're going to start adding the effects, and the first one I'm going to
start with is the Aerial Dust Burst effect.
So I will bring this clip on top, also bring this one as well, and this one.
And now what I'm going to do is to place the smoke asset in position, the second one, I
turned it to horizontal to make some variation, and now bring the third one, change the scale
position like I'm doing, and now I'm going to trim all the clips from the beginning,
like so.
And finally, you will get this look.
They help to sell the effect, you know?
Alright, so now I'm going to add these Lightning Atmos, both Atmos 5 and Atmos 2, bring them
into your timeline, I will position it right here, and then I will right-click on it and
choose Time, Time Stretch, and lower the value to 25% to make it a bit faster.
Now go to Effect, RGB Effects, and choose Optical Glow.
If you don't have this Optical Glow, you can choose the regular glow effect from After
Effects.
Now increase the Amount, Size, and also Highlights only, Highlight Rolloff, and finally change
the Alpha Channel to Generate Unmult, to get rid of these black edges, and get this cool,
shiny lightning effect.
Great, looks good now.
Okay, I will add a keyframe for the position of this Atmos clip, move forward in time,
and okay, I will also add a keyframe for the scale, so it follows the subject in both position
and scale, as you can see.
Okay, now I will duplicate the Atmos 5 clip, then hold the Alt key, and bring the Atmos
2 clip on top of this Atmos 5, to just replace it.
By using this trick, it will copy all the properties from the previous Atmos 5 clip,
and get this look.
Perfect.
Okay, I think I'm gonna move this scale keyframe forward a bit.
Okay, I think I'm gonna move the Atmos 5 backward a little bit, then select all the keyframes,
and move them closer, like so, then enable Motion Blur for both lightning assets.
Okay, I will go to, before I jump out of the bed, then lower the scale for this Atmos 5
asset, then move the keyframe a little closer to the other ones, and now for the Atmos 2
clip, I guess I'm gonna delete all the keyframes from both position and scale, so it stays
right in position, and be left with this look.
I think it looks better now.
Yeah, some lightning has to stay in position, so one asset moves along with the actor, with
the subject, and the other one is left in position.
It looks better, I guess.
Now, I will select everything, and choose Precompose to make a new precomp.
I will scrub through the footage to this frame, and now select the precomp, and go to
Effect, RGB Effects, and I will select the Lens Distortion Matcher effect to add some
lens distortion to the scene.
By the way, if you do not have this Red Giant Lens Distortion Matcher, that's fine.
It's an option, okay?
So, you don't have to do it.
It's just gonna help sell the effect, and add some distortion, so first thing to do
is to go to this Lens Type, choose Fish Eye, then create a keyframe for the distortion
value, so it is 0 at the beginning, then move forward a couple frames, like so, and I will
decrease the value to about 80, 84, something like this, then move forward again, and after
the actor leaves the scene, I will lower the value back to 0, then enable Motion Blur for
the precomp, and get this look.
Right, I think I'm gonna jump back inside the precomp, I will add a new Adjustment Layer,
and I will add another effect into this Adjustment Layer, so go to Effects, another one from
Red Giant, it's called Chromatic Displacement, so for the Displacement Layer, I will choose
the Lightning Asset Layer, which is Atmos 2, so you can see in the screen, you get some
kind of displacement, exactly on the Lightning Atmos Asset, okay now I will create a duplicate
layer of the Adjustment Layer, and drop it down, just on top of the Aerial Dust Burst
one, and then just change the Displacement Layer from Atmos 2 to Aerial Dust Burst 1,
just the one that's below this Adjustment Layer, okay, and you can just play around
with these values, both Displace Amount and Soften Displace Layer, you can also play around
with the Displace Spread, and get this look, yeah, it looks a lot better with the displacement.
Okay, I think I'm gonna drop this Adjustment Layer down, and change the Displacement Layer
to the Atmos 5 clip, so the displacement is kind of moving with the actor, let's see how it looks.
Okay, I will add the keyframe for the Displace Amount to be zero at the beginning,
then increase it after a couple frames, and that's it. Okay, you can see the difference.
Alright, so I will select both these keyframes, and move them forward like so,
okay, I think everything is good, so I'm gonna go back to my main comp, and now I'm gonna add
a keyframe for both Position and Scale at the beginning of the clip, and then, yeah, so I kind of
going to increase the Scale, I want it to be zoomed in in the beginning, so increase the Scale,
and then position it to be in the middle, then move forward to before the, just the moment before
the actor jumps out of the bed, and right here, I want to add a keyframe for both Position and
Scale, then just move forward a couple other frames, and right now, I will lower the Scale
back to 100, and adjust the Position, as you can see, 1080, okay, this is good, so we'll get this
one, right, okay, I think I'm gonna scale it just a little bit to, let's say, 110, yeah, it looks
better, I think I'm gonna move the keyframes backward a little bit, yeah, I have to move the
Position keyframe as well, yeah, good, nice, drop down, okay, let's see, yeah, Distortion is great,
right, so I will make another Precomp, so Precompose this Precomp, now I want to add
the Camera Shake effect, so I will add this Earthquake effect from ActionVFX, my guess is
for free, I will leave you a download link in the description, see, the effect is too long, but I'm
just gonna take all the keyframes I need, and I'm just gonna select all the rest, and delete them,
so I will add a Transform effect, and just move the Clip back in position,
then just increase the Scale to 110, so you get that kind of Camera Shake when the actor passes
near the camera, okay, yeah, it looks a lot better with the Camera Shake, and of course,
don't forget to enable the Motion Blur for both the Clip and the Composition as well,
okay, I think I'm gonna add a CC Force Motion Blur effect, and increase the Shutter Angle to
about 360, to give more of that Motion Blur effect, it looks perfect, I guess I'm gonna
change the Camera Shake effect, maybe I will choose this Impact, drop it like so, then get
rid of these useless keyframes, and now increase the Scaling of the Clip, and position it like so,
let's increase the Scale to 200, so you have to keep adjusting both Scale and Position,
till you get it right in the middle, okay, so let's see how it looks, yeah, perfect,
I think this Impact looks better than the Earthquake, yeah, it looks good,
and yes, I guess we're done, that's basically it for the first effect. I guess this video is a bit
long, so I will be stopping here, and I will be uploading another video, explaining how to create
the rest of the effects. So that's it for this video, in the future videos I will be making more
of explaining how other creators make certain VFX videos, so if you have anything in mind,
just leave me a comment below, and now just wait for the second video,
it will be uploaded next week, and now, see you in the next video!

