10 MOST EXTREME VEHICLES EVER MADE

Screw Driver
87 followers
#cars #automobile #business #consulting #salesagent
10 MOST EXTREME VEHICLES EVER MADE
----------------------
The Hum Rider
Inspired by years of frustration with traffic, the Hum Rider gives us the ability to rise above it. It is built like a regular car — like a standard Jeep Cherokee Wagon SUV — but when you’re stuck in traffic and can’t take it anymore, you can push a button that lifts up the body of the car, widens the wheelbase, and allows you to ride over the competition. http://bit.ly/2uNlDcK
The Humrider Don't be fooled by the
relatively docile name. The Humrider is a sleek and powerful beast of a machine.
It's built like a regular car, like a standard Jeep Cherokee wagon SUV. But when you're stuck
in traffic and can't take it anymore, you can push a button that lifts up the body of the car,
widens the wheelbase, and allows you to ride over the competition.
It's a product of the mind of mechanical effects engineer Scott Beverley,
who designed the Humrider with more than 300 feet of hydraulic lines
powering a myriad of vehicular functions. It makes use of a gas-powered Honda generator to
deliver electricity to the pumps in charge of providing the 900 pounds of pressure that power
the vehicle. When fully extended, the Humrider towers over regular vehicles with four cameras,
giving you a look at the plebeian cars at your feet as you ride over the traffic jam
to the rest you deserve. Letrons
If you're more of a looks over functions sort of person, then you may want to give the Letron a
miss. This unique vehicle was built by a research and development startup in Turkey to emulate the
fictional Transformers. Built on the BMW luxury coupe, the Letrons is a real shapeshifting car
that can assume an anthropomorphic form in mere minutes. While it can't quite pull off the
acrobatic feats of the fictional Transformers, the Letron can make some neck and head movement,
arm movements, wrist action, adjustable lighting, and is enriched with the capability to speed.
It also has an inbuilt power system to control a truly tremendous energy consumption and
distribution, as well as fog that can be controlled interactively, and a dynamic eye
which allows highly effective visuality. If you're worried about accidentally bumping into
something with your giant robot car, you shouldn't be worried. The Letron has both
front and rear security sensors, as well as the ability to be controlled via remote control.
If you want to own a Letron, you should be aware that you can't cruise your robot vehicle down the
street as of yet, at least until they finish working on the electric engine.
Ponzi Ergo A harvester in the forestry industry
and true conqueror of jungle terrain, the Ergo by Ponzi cuts down trees and removes branches to
make a nice clean log ready for hauling. It's available in six- or eight-wheel configurations.
Both come with cabin suspension system to help dwindle down any potentially compromising inertia
from lateral swings during operation. The eight-wheels version is more suitable for
difficult job sites with steep slope and demanding terrain.
The machine stands between 2.63 and 3.09 meters with 600 mm of ground clearance.
It weighs 21.5 tons, powered by a 286-horsepower engine made by Mercedes-Benz
and equipped with advanced transmission. The Ergo glides through steep ground like a tank.
The telescopic crane is what makes the Ergo an impressive tree harvester.
It can be folded away lower than the cabin itself, allowing for better maneuverability on the road.
On the job site, the harvesting head can reach up to 11 meters,
although the manufacturer offers shorter lengths as well.
Paramount Marauder The aptly named Marauder was manufactured
by Paramount Group to be the frontline vehicle for reconnaissance and peacekeeping missions.
It's a 4x4 mine-protected armored vehicle with a seating capacity of 10
and the ability to protect crew from the many dangers of peacekeeping in a war zone.
It makes use of a double-skin monocoque hull structure which provides the mine protection of
Stenag 4569 Level 4A and 4B. Sometimes the best defense is a good offense,
so the Marauder has the capacity to be fitted with light and medium caliber machine guns
and cannon weapon installations, mortar firing platforms and missile launchers.
It also features add-on armor plates and bulletproof windows to enhance
situational awareness and excellent on- and off-road mobility and reliability,
with top speeds of up to 100 kilometers an hour and a maximum road range of 700 kilometers,
in case these protections are not enough and you have to make your way out of danger fast.
Mars Rover Concept Vehicle Known as the Mars Rover Vehicle Navigator,
the all-electric six-wheeled car was unveiled as a concept back in May 2017.
Everything about it has been built to tackle the challenges and obstacles on the terrains
of the Red Planet. The interior is more like an aircraft than a road car. It has two seats
in the front for a driver and co-driver and another one behind those two. The detachable
rear section is none other than a high-tech laboratory with everything a space explorer
could possibly need to stay on course and study every bit of rock collected on the go.
The wheels are not the usual air-filled tires, but an open structure specifically designed to
glide through uneven terrain without breaking a sweat. Power comes from a 700-volt battery
and solar cells, just about enough to drag the 2.5-ton monster around the surface of Mars.
Thor Ultimate ATV
Tremble before the God of Thunder. The Thor Ultimate ATV brings all the power and the
fury of the ancient Norse god to your very fingertips. Ironically, this vehicle was
created by Ukrainians with no relationship to the Nordic people. But after over two
years of tweaking and modification, this vehicle well lived up to its name.
It's powered by a 2-liter turbodiesel General Motors with 200 horsepower,
gearbox Automatic 6-speed Aisin built with a completely monocoque lightweight fiberglass body
and the ability to traverse over water without fear of rust. The Thor comfortably seats up to
six people and it has a load capacity on firm grounds which exceeds 1,000 kilograms.
If you're more interested in how fast it runs, the Thor has been demonstrated to reach a maximum
speed of 46 mph over land and a maximum speed of 5 mph over water.
At present, only eight Thor ATVs are available on the market, with five already sold in Ukraine
and the rest available for purchase in North America, Northern Europe, Africa, and Australia.
Ripsaw EV3 F1
The Ripsaw was designed at How and How Technologies to be one of the most cutting-edge
extreme vehicles on Earth. It's been demonstrated to be able to provide an amazing 1500 horsepower
and an astonishing 0.2 hp-lbs power-to-weight ratio. Not content with simply looking awesome,
the Ripsaw EV3 F1 stakes its claim as the most thrilling single-seat off-road vehicle with a
total weight of 7,750 pounds and the ability to raise its suspension up to 16 inches.
An air-suspended cockpit with a five-point racing harness completes the extreme look
while the price, which has been noted as starting from $500,000,
makes sure that only the most extreme can drive this vehicle.
Nautilus Minerals
Although the Toronto-based deep-sea mining company is no more, the robots it used for
the job were among the most impressive industrial machines ever built. Before the mining operation
could begin, an auxiliary cutter equipped with counter-rotating gigantic carbide picks
would carve the seabed to create an even surface. Think of it as an excavation and
road construction project underwater. Unfriendly terrain like pockets and
cliffs must be cleared to ensure smooth mining operation. Next in line is the bulk cutter to
turn rocks into mashed gravel for easy collecting. It featured a massive cutting
drum to help break down sediment into a more practical size. Thanks to auxiliary cutter,
which had flattened the seabed already, bulk cutter could do the job at relative ease.
Materials would be channeled to a major pile, still on the seafloor, for the robot to work on.
The third robot, Super Sucker, came next to pump crushed rock and water from the seafloor
to production vessel on the surface. It was like an extremely overbuilt vacuum cleaner that could
also mix the ore with water. Otherwise, it would be impossible to pipe the mined minerals to ship
up above. Bagger 293
Manufactured by German-based industrial company TACKRAFT, the scary-looking excavator is called
the Bagger 293. Unlike a typical digger, however, the Bagger is a gigantic bucket-wheel machine
capable of mining 220,000 tons of brown coal per day. It looks like the kind of heavy-duty
equipment that the Terminator would use. It stands 94 meters high and weighs 15.6 tons.
Bagger 293 is currently the heaviest and largest earth-moving equipment in the world.
Despite the intimidating look, the operation is actually pretty simple.
Strapped to the front of it are 18 massive buckets put together like a post-apocalyptic
ferris wheel. As the wheel rotates, each bucket scoops up 1,452 gallons of earth and dumps it
onto a conveyor belt, which in many cases runs many miles long to the collection site.
For the Bagger 293, a day of operation means moving 8.48 million cubic feet of soil,
coal, or anything else that lies ahead of it, equal to about 96 Olympic-sized swimming pools.
The price tag is 100 million dollars.
Train Snowblower
Also known as Rotary Snowplow, the monstrous-looking snowblower weighs more than 150 tons
and is fitted with an 11-foot fan to cut through the deep and thick snow from railroad tracks.
The vehicle was first used on American railroads in the 1880s,
originally steam-powered and very slow. Modern snowblower no longer uses steam power.
It's not even self-propelled, but coupled with one or more locomotives behind it.
Think of the snowblower as a plow, but instead of using any kind of metal shovel attached to
the nose, the snowblower, as the name suggests, blows the snow out of the way.
You may see the vehicle quite often during extreme winter when snow volumes and thickness
are greater and deeper than the height of typical rail snowplow blades.
The locomotive behind the snowblower is controlled by an engineer,
while a separate crew runs the rotary. The snowplow has an extended cab in case the work
requires an extended team comprised of an engineer, road foreman, conductor,
and mechanical support staff to maintain the equipment on the job site. When not in use,
the rotary snowplow is stored in operative condition and can be ready to clear any track
in a moment's notice.
